[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231127202704.1263376-13-tom.zanussi@linux.intel.com>
Date: Mon, 27 Nov 2023 14:27:02 -0600
From: Tom Zanussi <tom.zanussi@...ux.intel.com>
To: herbert@...dor.apana.org.au, davem@...emloft.net,
fenghua.yu@...el.com, vkoul@...nel.org
Cc: dave.jiang@...el.com, tony.luck@...el.com,
wajdi.k.feghali@...el.com, james.guilford@...el.com,
kanchana.p.sridhar@...el.com, vinodh.gopal@...el.com,
giovanni.cabiddu@...el.com, pavel@....cz,
linux-kernel@...r.kernel.org, linux-crypto@...r.kernel.org,
dmaengine@...r.kernel.org
Subject: [PATCH v10 12/14] crypto: iaa - Add irq support for the crypto async interface
The existing iaa crypto async support provides an implementation that
satisfies the interface but does so in a synchronous manner - it fills
and submits the IDXD descriptor and then waits for it to complete
before returning. This isn't a problem at the moment, since all
existing callers (e.g. zswap) wrap any asynchronous callees in a
synchronous wrapper anyway.
This change makes the iaa crypto async implementation truly
asynchronous: it fills and submits the IDXD descriptor, then returns
immediately with -EINPROGRESS. It also sets the descriptor's 'request
completion irq' bit and sets up a callback with the IDXD driver which
is called when the operation completes and the irq fires. The
existing callers such as zswap use synchronous wrappers to deal with
-EINPROGRESS and so work as expected without any changes.
This mode can be enabled by writing 'async_irq' to the sync_mode
iaa_crypto driver attribute:
echo async_irq > /sys/bus/dsa/drivers/crypto/sync_mode
Async mode without interrupts (caller must poll) can be enabled by
writing 'async' to it:
echo async > /sys/bus/dsa/drivers/crypto/sync_mode
The default sync mode can be enabled by writing 'sync' to it:
echo sync > /sys/bus/dsa/drivers/crypto/sync_mode
The sync_mode value setting at the time the IAA algorithms are
registered is captured in each algorithm's crypto_ctx and used for all
compresses and decompresses when using a given algorithm.
Signed-off-by: Tom Zanussi <tom.zanussi@...ux.intel.com>
---
drivers/crypto/intel/iaa/iaa_crypto.h | 2 +
drivers/crypto/intel/iaa/iaa_crypto_main.c | 266 ++++++++++++++++++++-
2 files changed, 266 insertions(+), 2 deletions(-)
diff --git a/drivers/crypto/intel/iaa/iaa_crypto.h b/drivers/crypto/intel/iaa/iaa_crypto.h
index 4c6b0f5a6b50..de014ac53adb 100644
--- a/drivers/crypto/intel/iaa/iaa_crypto.h
+++ b/drivers/crypto/intel/iaa/iaa_crypto.h
@@ -153,6 +153,8 @@ enum iaa_mode {
struct iaa_compression_ctx {
enum iaa_mode mode;
bool verify_compress;
+ bool async_mode;
+ bool use_irq;
};
#endif
diff --git a/drivers/crypto/intel/iaa/iaa_crypto_main.c b/drivers/crypto/intel/iaa/iaa_crypto_main.c
index 6e2a8826ecfd..9dd52e1ea5ca 100644
--- a/drivers/crypto/intel/iaa/iaa_crypto_main.c
+++ b/drivers/crypto/intel/iaa/iaa_crypto_main.c
@@ -122,6 +122,102 @@ static ssize_t verify_compress_store(struct device_driver *driver,
}
static DRIVER_ATTR_RW(verify_compress);
+/*
+ * The iaa crypto driver supports three 'sync' methods determining how
+ * compressions and decompressions are performed:
+ *
+ * - sync: the compression or decompression completes before
+ * returning. This is the mode used by the async crypto
+ * interface when the sync mode is set to 'sync' and by
+ * the sync crypto interface regardless of setting.
+ *
+ * - async: the compression or decompression is submitted and returns
+ * immediately. Completion interrupts are not used so
+ * the caller is responsible for polling the descriptor
+ * for completion. This mode is applicable to only the
+ * async crypto interface and is ignored for anything
+ * else.
+ *
+ * - async_irq: the compression or decompression is submitted and
+ * returns immediately. Completion interrupts are
+ * enabled so the caller can wait for the completion and
+ * yield to other threads. When the compression or
+ * decompression completes, the completion is signaled
+ * and the caller awakened. This mode is applicable to
+ * only the async crypto interface and is ignored for
+ * anything else.
+ *
+ * These modes can be set using the iaa_crypto sync_mode driver
+ * attribute.
+ */
+
+/* Use async mode */
+static bool async_mode;
+/* Use interrupts */
+static bool use_irq;
+
+/**
+ * set_iaa_sync_mode - Set IAA sync mode
+ * @name: The name of the sync mode
+ *
+ * Make the IAA sync mode named @name the current sync mode used by
+ * compression/decompression.
+ */
+
+static int set_iaa_sync_mode(const char *name)
+{
+ int ret = 0;
+
+ if (sysfs_streq(name, "sync")) {
+ async_mode = false;
+ use_irq = false;
+ } else if (sysfs_streq(name, "async")) {
+ async_mode = true;
+ use_irq = false;
+ } else if (sysfs_streq(name, "async_irq")) {
+ async_mode = true;
+ use_irq = true;
+ } else {
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static ssize_t sync_mode_show(struct device_driver *driver, char *buf)
+{
+ int ret = 0;
+
+ if (!async_mode && !use_irq)
+ ret = sprintf(buf, "%s\n", "sync");
+ else if (async_mode && !use_irq)
+ ret = sprintf(buf, "%s\n", "async");
+ else if (async_mode && use_irq)
+ ret = sprintf(buf, "%s\n", "async_irq");
+
+ return ret;
+}
+
+static ssize_t sync_mode_store(struct device_driver *driver,
+ const char *buf, size_t count)
+{
+ int ret = -EBUSY;
+
+ mutex_lock(&iaa_devices_lock);
+
+ if (iaa_crypto_enabled)
+ goto out;
+
+ ret = set_iaa_sync_mode(buf);
+ if (ret == 0)
+ ret = count;
+out:
+ mutex_unlock(&iaa_devices_lock);
+
+ return ret;
+}
+static DRIVER_ATTR_RW(sync_mode);
+
static struct iaa_compression_mode *iaa_compression_modes[IAA_COMP_MODES_MAX];
static int find_empty_iaa_compression_mode(void)
@@ -1000,6 +1096,111 @@ static int deflate_generic_decompress(struct acomp_req *req)
return ret;
}
+static int iaa_remap_for_verify(struct device *dev, struct iaa_wq *iaa_wq,
+ struct acomp_req *req,
+ dma_addr_t *src_addr, dma_addr_t *dst_addr);
+
+static int iaa_compress_verify(struct crypto_tfm *tfm, struct acomp_req *req,
+ struct idxd_wq *wq,
+ dma_addr_t src_addr, unsigned int slen,
+ dma_addr_t dst_addr, unsigned int *dlen,
+ u32 compression_crc);
+
+static void iaa_desc_complete(struct idxd_desc *idxd_desc,
+ enum idxd_complete_type comp_type,
+ bool free_desc, void *__ctx,
+ u32 *status)
+{
+ struct iaa_device_compression_mode *active_compression_mode;
+ struct iaa_compression_ctx *compression_ctx;
+ struct crypto_ctx *ctx = __ctx;
+ struct iaa_device *iaa_device;
+ struct idxd_device *idxd;
+ struct iaa_wq *iaa_wq;
+ struct pci_dev *pdev;
+ struct device *dev;
+ int ret, err = 0;
+
+ compression_ctx = crypto_tfm_ctx(ctx->tfm);
+
+ iaa_wq = idxd_wq_get_private(idxd_desc->wq);
+ iaa_device = iaa_wq->iaa_device;
+ idxd = iaa_device->idxd;
+ pdev = idxd->pdev;
+ dev = &pdev->dev;
+
+ active_compression_mode = get_iaa_device_compression_mode(iaa_device,
+ compression_ctx->mode);
+ dev_dbg(dev, "%s: compression mode %s,"
+ " ctx->src_addr %llx, ctx->dst_addr %llx\n", __func__,
+ active_compression_mode->name,
+ ctx->src_addr, ctx->dst_addr);
+
+ ret = check_completion(dev, idxd_desc->iax_completion,
+ ctx->compress, false);
+ if (ret) {
+ dev_dbg(dev, "%s: check_completion failed ret=%d\n", __func__, ret);
+ if (!ctx->compress &&
+ idxd_desc->iax_completion->status == IAA_ANALYTICS_ERROR) {
+ pr_warn("%s: falling back to deflate-generic decompress, "
+ "analytics error code %x\n", __func__,
+ idxd_desc->iax_completion->error_code);
+ ret = deflate_generic_decompress(ctx->req);
+ if (ret) {
+ dev_dbg(dev, "%s: deflate-generic failed ret=%d\n",
+ __func__, ret);
+ err = -EIO;
+ goto err;
+ }
+ } else {
+ err = -EIO;
+ goto err;
+ }
+ } else {
+ ctx->req->dlen = idxd_desc->iax_completion->output_size;
+ }
+
+ if (ctx->compress && compression_ctx->verify_compress) {
+ dma_addr_t src_addr, dst_addr;
+ u32 compression_crc;
+
+ compression_crc = idxd_desc->iax_completion->crc;
+
+ ret = iaa_remap_for_verify(dev, iaa_wq, ctx->req, &src_addr, &dst_addr);
+ if (ret) {
+ dev_dbg(dev, "%s: compress verify remap failed ret=%d\n", __func__, ret);
+ err = -EIO;
+ goto out;
+ }
+
+ ret = iaa_compress_verify(ctx->tfm, ctx->req, iaa_wq->wq, src_addr,
+ ctx->req->slen, dst_addr, &ctx->req->dlen,
+ compression_crc);
+ if (ret) {
+ dev_dbg(dev, "%s: compress verify failed ret=%d\n", __func__, ret);
+ err = -EIO;
+ }
+
+ dma_unmap_sg(dev, ctx->req->dst, sg_nents(ctx->req->dst), DMA_TO_DEVICE);
+ dma_unmap_sg(dev, ctx->req->src, sg_nents(ctx->req->src), DMA_FROM_DEVICE);
+
+ goto out;
+ }
+err:
+ dma_unmap_sg(dev, ctx->req->dst, sg_nents(ctx->req->dst), DMA_FROM_DEVICE);
+ dma_unmap_sg(dev, ctx->req->src, sg_nents(ctx->req->src), DMA_TO_DEVICE);
+out:
+ if (ret != 0)
+ dev_dbg(dev, "asynchronous compress failed ret=%d\n", ret);
+
+ if (ctx->req->base.complete)
+ acomp_request_complete(ctx->req, err);
+
+ if (free_desc)
+ idxd_free_desc(idxd_desc->wq, idxd_desc);
+ iaa_wq_put(idxd_desc->wq);
+}
+
static int iaa_compress(struct crypto_tfm *tfm, struct acomp_req *req,
struct idxd_wq *wq,
dma_addr_t src_addr, unsigned int slen,
@@ -1048,6 +1249,22 @@ static int iaa_compress(struct crypto_tfm *tfm, struct acomp_req *req,
desc->src2_size = sizeof(struct aecs_comp_table_record);
desc->completion_addr = idxd_desc->compl_dma;
+ if (ctx->use_irq && !disable_async) {
+ desc->flags |= IDXD_OP_FLAG_RCI;
+
+ idxd_desc->crypto.req = req;
+ idxd_desc->crypto.tfm = tfm;
+ idxd_desc->crypto.src_addr = src_addr;
+ idxd_desc->crypto.dst_addr = dst_addr;
+ idxd_desc->crypto.compress = true;
+
+ dev_dbg(dev, "%s use_async_irq: compression mode %s,"
+ " src_addr %llx, dst_addr %llx\n", __func__,
+ active_compression_mode->name,
+ src_addr, dst_addr);
+ } else if (ctx->async_mode && !disable_async)
+ req->base.data = idxd_desc;
+
dev_dbg(dev, "%s: compression mode %s,"
" desc->src1_addr %llx, desc->src1_size %d,"
" desc->dst_addr %llx, desc->max_dst_size %d,"
@@ -1062,6 +1279,12 @@ static int iaa_compress(struct crypto_tfm *tfm, struct acomp_req *req,
goto err;
}
+ if (ctx->async_mode && !disable_async) {
+ ret = -EINPROGRESS;
+ dev_dbg(dev, "%s: returning -EINPROGRESS\n", __func__);
+ goto out;
+ }
+
ret = check_completion(dev, idxd_desc->iax_completion, true, false);
if (ret) {
dev_dbg(dev, "check_completion failed ret=%d\n", ret);
@@ -1072,7 +1295,8 @@ static int iaa_compress(struct crypto_tfm *tfm, struct acomp_req *req,
*compression_crc = idxd_desc->iax_completion->crc;
- idxd_free_desc(wq, idxd_desc);
+ if (!ctx->async_mode)
+ idxd_free_desc(wq, idxd_desc);
out:
return ret;
err:
@@ -1255,6 +1479,22 @@ static int iaa_decompress(struct crypto_tfm *tfm, struct acomp_req *req,
desc->src1_size = slen;
desc->completion_addr = idxd_desc->compl_dma;
+ if (ctx->use_irq && !disable_async) {
+ desc->flags |= IDXD_OP_FLAG_RCI;
+
+ idxd_desc->crypto.req = req;
+ idxd_desc->crypto.tfm = tfm;
+ idxd_desc->crypto.src_addr = src_addr;
+ idxd_desc->crypto.dst_addr = dst_addr;
+ idxd_desc->crypto.compress = false;
+
+ dev_dbg(dev, "%s: use_async_irq compression mode %s,"
+ " src_addr %llx, dst_addr %llx\n", __func__,
+ active_compression_mode->name,
+ src_addr, dst_addr);
+ } else if (ctx->async_mode && !disable_async)
+ req->base.data = idxd_desc;
+
dev_dbg(dev, "%s: decompression mode %s,"
" desc->src1_addr %llx, desc->src1_size %d,"
" desc->dst_addr %llx, desc->max_dst_size %d,"
@@ -1269,6 +1509,12 @@ static int iaa_decompress(struct crypto_tfm *tfm, struct acomp_req *req,
goto err;
}
+ if (ctx->async_mode && !disable_async) {
+ ret = -EINPROGRESS;
+ dev_dbg(dev, "%s: returning -EINPROGRESS\n", __func__);
+ goto out;
+ }
+
ret = check_completion(dev, idxd_desc->iax_completion, false, false);
if (ret) {
dev_dbg(dev, "%s: check_completion failed ret=%d\n", __func__, ret);
@@ -1291,7 +1537,8 @@ static int iaa_decompress(struct crypto_tfm *tfm, struct acomp_req *req,
*dlen = req->dlen;
- idxd_free_desc(wq, idxd_desc);
+ if (!ctx->async_mode)
+ idxd_free_desc(wq, idxd_desc);
out:
return ret;
err:
@@ -1600,6 +1847,8 @@ static int iaa_comp_adecompress(struct acomp_req *req)
static void compression_ctx_init(struct iaa_compression_ctx *ctx)
{
ctx->verify_compress = iaa_verify_compress;
+ ctx->async_mode = async_mode;
+ ctx->use_irq = use_irq;
}
static int iaa_comp_init_fixed(struct crypto_acomp *acomp_tfm)
@@ -1808,6 +2057,7 @@ static struct idxd_device_driver iaa_crypto_driver = {
.remove = iaa_crypto_remove,
.name = IDXD_SUBDRIVER_NAME,
.type = dev_types,
+ .desc_complete = iaa_desc_complete,
};
static int __init iaa_crypto_init_module(void)
@@ -1846,10 +2096,20 @@ static int __init iaa_crypto_init_module(void)
goto err_verify_attr_create;
}
+ ret = driver_create_file(&iaa_crypto_driver.drv,
+ &driver_attr_sync_mode);
+ if (ret) {
+ pr_debug("IAA sync mode attr creation failed\n");
+ goto err_sync_attr_create;
+ }
+
pr_debug("initialized\n");
out:
return ret;
+err_sync_attr_create:
+ driver_remove_file(&iaa_crypto_driver.drv,
+ &driver_attr_verify_compress);
err_verify_attr_create:
idxd_driver_unregister(&iaa_crypto_driver);
err_driver_reg:
@@ -1865,6 +2125,8 @@ static void __exit iaa_crypto_cleanup_module(void)
if (iaa_unregister_compression_device())
pr_debug("IAA compression device unregister failed\n");
+ driver_remove_file(&iaa_crypto_driver.drv,
+ &driver_attr_sync_mode);
driver_remove_file(&iaa_crypto_driver.drv,
&driver_attr_verify_compress);
idxd_driver_unregister(&iaa_crypto_driver);
--
2.34.1
Powered by blists - more mailing lists