| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <a62eb1df-2cf9-41cd-a64c-303f73549ce5@redhat.com>
Date: Mon, 27 Nov 2023 23:39:09 +0100
From: Hans de Goede <hdegoede@...hat.com>
To: Luke Jones <luke@...nes.dev>
Cc: ilpo.jarvinen@...ux.intel.com, corentin.chary@...il.com,
platform-driver-x86@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 1/1] platform/x86: asus-wmi: disable USB0 hub on ROG
Ally before suspend
Hi,
On 11/27/23 21:17, Luke Jones wrote:
>
>
> On Mon, Nov 27 2023 at 09:53:13 AM +01:00:00, Hans de Goede <hdegoede@...hat.com> wrote:
>> Hi,
>>
>> On 11/27/23 00:05, Luke D. Jones wrote:
>>> ASUS have worked around an issue in XInput where it doesn't support USB
>>> selective suspend, which causes suspend issues in Windows. They worked
>>> around this by adjusting the MCU firmware to disable the USB0 hub when
>>> the screen is switched off during the Microsoft DSM suspend path in ACPI.
>>>
>>> The issue we have with this however is one of timing - the call the tells
>>> the MCU to this isn't able to complete before suspend is done so we call
>>> this in a prepare() and add a small msleep() to ensure it is done. This
>>> must be done before the screen is switched off to prevent a variety of
>>> possible races.
>>>
>>> Further to this the MCU powersave option must also be disabled as it can
>>> cause a number of issues such as:
>>> - unreliable resume connection of N-Key
>>> - complete loss of N-Key if the power is plugged in while suspended
>>> Disabling the powersave option prevents this.
>>>
>>> Without this the MCU is unable to initialise itself correctly on resume.
>>>
>>> Signed-off-by: Luke D. Jones <luke@...nes.dev>
>>
>> Thanks, patch looks good to me, except that all the new lines
>> seem to use 4 spaces rather then a tab char as indent.
>
> Apologies for the previous HTML email.
> I must be going mad... are you sure? I've checked the patch file I submitted. Run checkpatch on it. Checked my email copy, and checked in lore... I can't see where space chars are?
So I just checked the copy in patchwork:
https://patchwork.kernel.org/project/platform-driver-x86/patch/20231126230521.125708-2-luke@ljones.dev/
and you are rights, no 4 spaces there.
Where as if you look further down in this reply, where the original
patch is quoted the 4 spaces are right there, so now I'm wondering
if maybe my mail client introduced the problem when I was replying ?
(replies to other patches preserve the tabs just fine).
So this is weird, but lets just forget about it, just some weird
glitch ...
Regards,
Hans
>
>>
>> With that fixed you can add my:
>>
>> Reviewed-by: Hans de Goede <hdegoede@...hat.com>
>>
>> to the next version.
>>
>> Regards,
>>
>> Hans
>>
>>
>>> ---
>>> drivers/platform/x86/asus-wmi.c | 50 ++++++++++++++++++++++
>>> include/linux/platform_data/x86/asus-wmi.h | 3 ++
>>> 2 files changed, 53 insertions(+)
>>>
>>> diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
>>> index 6a79f16233ab..4ba33dfebfd4 100644
>>> --- a/drivers/platform/x86/asus-wmi.c
>>> +++ b/drivers/platform/x86/asus-wmi.c
>>> @@ -16,6 +16,7 @@
>>> #include <linux/acpi.h>
>>> #include <linux/backlight.h>
>>> #include <linux/debugfs.h>
>>> +#include <linux/delay.h>
>>> #include <linux/dmi.h>
>>> #include <linux/fb.h>
>>> #include <linux/hwmon.h>
>>> @@ -132,6 +133,11 @@ module_param(fnlock_default, bool, 0444);
>>> #define ASUS_SCREENPAD_BRIGHT_MAX 255
>>> #define ASUS_SCREENPAD_BRIGHT_DEFAULT 60
>>>
>>> +/* Controls the power state of the USB0 hub on ROG Ally which input is on */
>>> +#define ASUS_USB0_PWR_EC0_CSEE "\\_SB.PCI0.SBRG.EC0.CSEE"
>>> +/* 300ms so far seems to produce a reliable result on AC and battery */
>>> +#define ASUS_USB0_PWR_EC0_CSEE_WAIT 300
>>> +
>>> static const char * const ashs_ids[] = { "ATK4001", "ATK4002", NULL };
>>>
>>> static int throttle_thermal_policy_write(struct asus_wmi *);
>>> @@ -300,6 +306,9 @@ struct asus_wmi {
>>>
>>> bool fnlock_locked;
>>>
>>> + /* The ROG Ally device requires the MCU USB device be disconnected before suspend */
>>> + bool ally_mcu_usb_switch;
>>> +
>>> struct asus_wmi_debug debug;
>>>
>>> struct asus_wmi_driver *driver;
>>> @@ -4488,6 +4497,8 @@ static int asus_wmi_add(struct platform_device *pdev)
>>> asus->nv_temp_tgt_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_NV_THERM_TARGET);
>>> asus->panel_overdrive_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_PANEL_OD);
>>> asus->mini_led_mode_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_MINI_LED_MODE);
>>> + asus->ally_mcu_usb_switch = acpi_has_method(NULL, ASUS_USB0_PWR_EC0_CSEE)
>>> + && dmi_match(DMI_BOARD_NAME, "RC71L");
>>>
>>> err = fan_boost_mode_check_present(asus);
>>> if (err)
>>> @@ -4654,6 +4665,43 @@ static int asus_hotk_resume(struct device *device)
>>> asus_wmi_fnlock_update(asus);
>>>
>>> asus_wmi_tablet_mode_get_state(asus);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int asus_hotk_resume_early(struct device *device)
>>> +{
>>> + struct asus_wmi *asus = dev_get_drvdata(device);
>>> +
>>> + if (asus->ally_mcu_usb_switch) {
>>> + if (ACPI_FAILURE(acpi_execute_simple_method(NULL, ASUS_USB0_PWR_EC0_CSEE, 0xB8)))
>>> + dev_err(device, "ROG Ally MCU failed to connect USB dev\n");
>>> + else
>>> + msleep(ASUS_USB0_PWR_EC0_CSEE_WAIT);
>>> + }
>>> + return 0;
>>> +}
>>> +
>>> +static int asus_hotk_prepare(struct device *device)
>>> +{
>>> + struct asus_wmi *asus = dev_get_drvdata(device);
>>> + int result, err;
>>> +
>>> + if (asus->ally_mcu_usb_switch) {
>>> + /* When powersave is enabled it causes many issues with resume of USB hub */
>>> + result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_MCU_POWERSAVE);
>>> + if (result == 1) {
>>> + dev_warn(device, "MCU powersave enabled, disabling to prevent resume issues");
>>> + err = asus_wmi_set_devstate(ASUS_WMI_DEVID_MCU_POWERSAVE, 0, &result);
>>> + if (err || result != 1)
>>> + dev_err(device, "Failed to set MCU powersave mode: %d\n", err);
>>> + }
>>> + /* sleep required to ensure USB0 is disabled before sleep continues */
>>> + if (ACPI_FAILURE(acpi_execute_simple_method(NULL, ASUS_USB0_PWR_EC0_CSEE, 0xB7)))
>>> + dev_err(device, "ROG Ally MCU failed to disconnect USB dev\n");
>>> + else
>>> + msleep(ASUS_USB0_PWR_EC0_CSEE_WAIT);
>>> + }
>>> return 0;
>>> }
>>>
>>> @@ -4701,6 +4749,8 @@ static const struct dev_pm_ops asus_pm_ops = {
>>> .thaw = asus_hotk_thaw,
>>> .restore = asus_hotk_restore,
>>> .resume = asus_hotk_resume,
>>> + .resume_early = asus_hotk_resume_early,
>>> + .prepare = asus_hotk_prepare,
>>> };
>>>
>>> /* Registration ***************************************************************/
>>> diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h
>>> index 63e630276499..ab1c7deff118 100644
>>> --- a/include/linux/platform_data/x86/asus-wmi.h
>>> +++ b/include/linux/platform_data/x86/asus-wmi.h
>>> @@ -114,6 +114,9 @@
>>> /* Charging mode - 1=Barrel, 2=USB */
>>> #define ASUS_WMI_DEVID_CHARGE_MODE 0x0012006C
>>>
>>> +/* MCU powersave mode */
>>> +#define ASUS_WMI_DEVID_MCU_POWERSAVE 0x001200E2
>>> +
>>> /* epu is connected? 1 == true */
>>> #define ASUS_WMI_DEVID_EGPU_CONNECTED 0x00090018
>>> /* egpu on/off */
>>
>
>
Powered by blists - more mailing lists