| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <SG2PR06MB3365CAEE9CE3F691DA1CA1E28BB9A@SG2PR06MB3365.apcprd06.prod.outlook.com>
Date: Mon, 27 Nov 2023 05:45:48 +0000
From: Billy Tsai <billy_tsai@...eedtech.com>
To: Rob Herring <robh@...nel.org>
CC: "jdelvare@...e.com" <jdelvare@...e.com>,
"linux@...ck-us.net" <linux@...ck-us.net>,
"krzysztof.kozlowski+dt@...aro.org"
<krzysztof.kozlowski+dt@...aro.org>,
"joel@....id.au" <joel@....id.au>,
"andrew@...id.au" <andrew@...id.au>,
"corbet@....net" <corbet@....net>,
"thierry.reding@...il.com" <thierry.reding@...il.com>,
"u.kleine-koenig@...gutronix.de" <u.kleine-koenig@...gutronix.de>,
"p.zabel@...gutronix.de" <p.zabel@...gutronix.de>,
"naresh.solanki@...ements.com" <naresh.solanki@...ements.com>,
"linux-hwmon@...r.kernel.org" <linux-hwmon@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-aspeed@...ts.ozlabs.org" <linux-aspeed@...ts.ozlabs.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>,
"linux-pwm@...r.kernel.org" <linux-pwm@...r.kernel.org>,
BMC-SW <BMC-SW@...eedtech.com>,
"patrick@...cx.xyz" <patrick@...cx.xyz>
Subject: Re: [PATCH RESEND v10 2/3] dt-bindings: hwmon: Support Aspeed g6 PWM
TACH Control
> > > > Document the compatible for aspeed,ast2600-pwm-tach device, which can
> > > > support up to 16 PWM outputs and 16 fan tach input.
> > > >
> > > > Signed-off-by: Billy Tsai <billy_tsai@...eedtech.com>
> > > > ---
> > > > .../bindings/hwmon/aspeed,g6-pwm-tach.yaml | 69 +++++++++++++++++++
> > > > 1 file changed, 69 insertions(+)
> > > > create mode 100644 Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml b/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml
> > > > new file mode 100644
> > > > index 000000000000..c615fb10705c
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml
> > > > @@ -0,0 +1,69 @@
> > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > +# Copyright (C) 2023 Aspeed, Inc.
> > > > +%YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/hwmon/aspeed,g6-pwm-tach.yaml#
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title: ASPEED G6 PWM and Fan Tach controller
> > > > +
> > > > +maintainers:
> > > > + - Billy Tsai <billy_tsai@...eedtech.com>
> > > > +
> > > > +description: |
> > > > + The ASPEED PWM controller can support up to 16 PWM outputs.
> > > > + The ASPEED Fan Tacho controller can support up to 16 fan tach input.
> > > > + They are independent hardware blocks, which are different from the
> > > > + previous version of the ASPEED chip.
> > > > +
> > > > +properties:
> > > > + compatible:
> > > > + enum:
> > > > + - aspeed,ast2600-pwm-tach
> > > > +
> > > > + reg:
> > > > + maxItems: 1
> > > > +
> > > > + clocks:
> > > > + maxItems: 1
> > > > +
> > > > + resets:
> > > > + maxItems: 1
> > > > +
> > > > + "#pwm-cells":
> > > > + const: 3
> > > > +
> > > > +patternProperties:
> > > > + "^fan-[0-9]+$":
> > > > + $ref: fan-common.yaml#
> > > > + unevaluatedProperties: false
> > > > + required:
> > > > + - tach-ch
> > > > +
> > > > +required:
> > > > + - reg
> > > > + - clocks
> > > > + - resets
> > > > + - "#pwm-cells"
> > > > + - compatible
> > > > +
> > > > +additionalProperties: false
> > > > +
> > > > +examples:
> > > > + - |
> > > > + #include <dt-bindings/clock/aspeed-clock.h>
> > > > + pwm_tach: pwm-tach-controller@...10000 {
> > > > + compatible = "aspeed,ast2600-pwm-tach";
> > > > + reg = <0x1e610000 0x100>;
> > > > + clocks = <&syscon ASPEED_CLK_AHB>;
> > > > + resets = <&syscon ASPEED_RESET_PWM>;
> > > > + #pwm-cells = <3>;
> > > > +
> > > > + fan-0 {
> >
> > > I assume there's a PWM connection here? How do you know which PWM? You
> > > said the tach channel is independent, so it is not that.
> >
> > > It should not be 0 from 'fan-0' because that's just a meaningless index.
> >
> > > You either need 'pwms' here or you can use 'reg' and the reg value is
> > > the PWM channel.
> >
> > Hi Rob, this binding is used to export the PWM provider and the Fan monitor (i.e., Tach).
> > If the user wants to add the PWM connection for the fan, it can be done as follows:
> >
> > fan0: pwm-fan0 {
> > compatible = "pwm-fan";
> > pwms = <&pwm_tach 0 40000 0>;
> > cooling-min-state = <0>;
> > cooling-max-state = <3>;
> > #cooling-cells = <2>;
> > cooling-levels = <0 15 128 255>;
> > };
> >
> > This will reuse the existing PWM fan driver (e.g., pwm-fan.c).
> I'm confused now. So what are the child nodes you have? You are
> defining the fan in 2 places? The "pwm-fan" driver supports a tach via
> an interrupt, so how would this work in your case?
Hi Rob,
The tach interrupt for the pwm-fan is option. In our case, the dts just reuse the pwm control function
of the pwm-fan, and the part of the tach monitor will be created by our fan child nodes.
So the dts will like followings:
// Use to declare the tach monitor for fan.
&pwm_tach {
fan-0 {
tach-ch = /bits/ 8 <0x0>;
};
fan-1 {
tach-ch = /bits/ 8 <0x1>;
};
...
}
// Reuse the pwm-fan.c to control the behavior of the PWM for fan.
fan0: pwm-fan0 {
compatible = "pwm-fan";
pwms = <&pwm_tach 0 40000 0>; /* Target freq:25 kHz */
cooling-min-state = <0>;
cooling-max-state = <3>;
#cooling-cells = <2>;
cooling-levels = <0 15 128 255>;
};
fan1: pwm-fan1 {
compatible = "pwm-fan";
pwms = <&pwm_tach 1 40000 0>; /* Target freq:25 kHz */
cooling-min-state = <0>;
cooling-max-state = <3>;
#cooling-cells = <2>;
cooling-levels = <0 15 128 255>;
};
Thanks
Powered by blists - more mailing lists