[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <bcf1cc27-cdba-40c2-b578-b4514f92df7c@linaro.org>
Date: Mon, 27 Nov 2023 09:05:33 +0100
From: Neil Armstrong <neil.armstrong@...aro.org>
To: Viacheslav Bocharov <adeep@...ina.in>,
Jerome Brunet <jbrunet@...libre.com>,
linux-amlogic@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH] arm64: dts: meson-axg: jethub-jxx add support for EEPROM
On 02/11/2023 07:12, Viacheslav Bocharov wrote:
> Add dts node for EEPROM placed on baseboard in JetHub D1+ devices.
>
> Signed-off-by: Viacheslav Bocharov <adeep@...ina.in>
> ---
> .../amlogic/meson-axg-jethome-jethub-j110-rev-2.dts | 12 ++++++++++++
> .../amlogic/meson-axg-jethome-jethub-j110-rev-3.dts | 12 ++++++++++++
> 2 files changed, 24 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
> index 0062667c4f65..2c684f0ca99a 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
> @@ -35,3 +35,15 @@ bluetooth {
> device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>;
> };
> };
> +
> +&i2c_AO {
> + /* EEPROM on base board */
> + eeprompd: eeprom@56 {
> + compatible = "atmel,24c64";
> + reg = <0x56>;
> + pagesize = <0x20>;
> + label = "eeprompd";
> + address-width = <0x10>;
> + vcc-supply = <&vddao_3v3>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
> index c2d22b00c1cd..c356bd2cc63a 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
> @@ -25,3 +25,15 @@ memory@0 {
> &sd_emmc_b {
> broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/
> };
> +
> +&i2c_AO {
> + /* EEPROM on base board */
> + eeprompd: eeprom@56 {
> + compatible = "atmel,24c64";
> + reg = <0x56>;
> + pagesize = <0x20>;
> + label = "eeprompd";
> + address-width = <0x10>;
> + vcc-supply = <&vddao_3v3>;
> + };
> +};
Reviewed-by: Neil Armstrong <neil.armstrong@...aro.org>
Powered by blists - more mailing lists