| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231127104045.96722-3-ramon.nordin.rodriguez@ferroamp.se>
Date: Mon, 27 Nov 2023 11:40:44 +0100
From: Ramón N.Rodriguez
<ramon.nordin.rodriguez@...roamp.se>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Ramón N.Rodriguez
<ramon.nordin.rodriguez@...roamp.se>
Subject: [PATCH 2/3] net: microchip_t1s: add support for LAN867x Rev.C1
From: Ramón Nordin Rodriguez <ramon.nordin.rodriguez@...roamp.se>
This commit adds support for yet another Microchip T1S lan867x phy
revision. The only meaningful difference between Rev.B that already is
supported and Rev.C is the init change where other undocumented regs
needs writes with unexplained values.
The changes introduced here attempts to follow the manufacturer
recommendations in AN1699.
Signed-off-by: Ramón Nordin Rodriguez <ramon.nordin.rodriguez@...roamp.se>
---
drivers/net/phy/microchip_t1s.c | 96 +++++++++++++++++++++++++++++++++
1 file changed, 96 insertions(+)
diff --git a/drivers/net/phy/microchip_t1s.c b/drivers/net/phy/microchip_t1s.c
index ace2bf35a18a..db84d850b165 100644
--- a/drivers/net/phy/microchip_t1s.c
+++ b/drivers/net/phy/microchip_t1s.c
@@ -12,6 +12,7 @@
#include <linux/phy.h>
#define PHY_ID_LAN867X_REVB1 0x0007C162
+#define PHY_ID_LAN867X_REVC1 0x0007C164
#define PHY_ID_LAN865X_REVB0 0x0007C1B3
#define LAN867X_REG_STS2 0x0019
@@ -59,6 +60,22 @@ static const u16 lan867x_revb1_fixup_masks[12] = {
0x0600, 0x7F00, 0x2000, 0xFFFF,
};
+static const u16 lan867x_revc1_fixup_registers[12] = {
+ 0x00D0, 0x00E0, 0x0084, 0x008A,
+ 0x00E9, 0x00F5, 0x00F4, 0x00F8,
+ 0x00F9, 0x0081, 0x0091, 0x0093,
+};
+
+/* Index 2 & 3 will not be used, these are runtime populated/calculated.
+ * It makes the code a lot easier to read having this arr the same len
+ * as the _fixup_registers arr though
+ */
+static const u16 lan867x_revc1_fixup_values[12] = {
+ 0x3F31, 0xC000, 0xFFFF, 0xFFFF,
+ 0x9E50, 0x1CF8, 0xC020, 0x9B00,
+ 0x4E53, 0x0080, 0x9660, 0x06E9,
+};
+
/* LAN865x Rev.B0 configuration parameters from AN1760 */
static const u32 lan865x_revb0_fixup_registers[28] = {
0x0091, 0x0081, 0x0043, 0x0044,
@@ -263,6 +280,74 @@ static int lan867x_revb1_config_init(struct phy_device *phydev)
return 0;
}
+static int lan867x_revc1_read_fixup_value(struct phy_device *phydev, u16 addr)
+{
+ int regval;
+ /* The AN pretty much just states 'trust us' regarding these magic vals */
+ const u16 magic_or = 0xE0;
+ const u16 magic_reg_mask = 0x1F;
+ const u16 magic_check_mask = 0x10;
+
+ regval = lan865x_revb0_indirect_read(phydev, addr);
+ if (regval < 0)
+ return regval;
+
+ regval &= magic_reg_mask;
+
+ return (regval & magic_check_mask) ? regval | magic_or : regval;
+}
+
+static int lan867x_revc1_config_init(struct phy_device *phydev)
+{
+ int err;
+ int regval;
+ u16 override0;
+ u16 override1;
+ const u16 override_addr0 = 0x4;
+ const u16 override_addr1 = 0x8;
+ const u8 index_to_override0 = 2;
+ const u8 index_to_override1 = 3;
+
+ err = lan867x_wait_for_reset_complete(phydev);
+ if (err)
+ return err;
+
+ /* The application note specifies a super convenient process
+ * where 2 of the fixup regs needs a write with a value that is
+ * a modified result of another reg read.
+ * Enjoy the magic show.
+ */
+ regval = lan867x_revc1_read_fixup_value(phydev, override_addr0);
+ if (regval < 0)
+ return regval;
+ override0 = ((regval + 9) << 10) | ((regval + 14) << 4) | 0x3;
+
+ regval = lan867x_revc1_read_fixup_value(phydev, override_addr1);
+ if (regval < 0)
+ return regval;
+ override1 = (regval + 40) << 10;
+
+ for (int i = 0; i < ARRAY_SIZE(lan867x_revc1_fixup_registers); i++) {
+ /* The hardcoded */
+ if (i == index_to_override0)
+ err = phy_write_mmd(phydev, MDIO_MMD_VEND2,
+ lan867x_revc1_fixup_registers[i],
+ override0);
+ else if (i == index_to_override1)
+ err = phy_write_mmd(phydev, MDIO_MMD_VEND2,
+ lan867x_revc1_fixup_registers[i],
+ override1);
+ else
+ err = phy_write_mmd(phydev, MDIO_MMD_VEND2,
+ lan867x_revc1_fixup_registers[i],
+ lan867x_revc1_fixup_values[i]);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
static int lan86xx_read_status(struct phy_device *phydev)
{
/* The phy has some limitations, namely:
@@ -289,6 +374,16 @@ static struct phy_driver microchip_t1s_driver[] = {
.set_plca_cfg = genphy_c45_plca_set_cfg,
.get_plca_status = genphy_c45_plca_get_status,
},
+ {
+ PHY_ID_MATCH_EXACT(PHY_ID_LAN867X_REVC1),
+ .name = "LAN867X Rev.C1",
+ .features = PHY_BASIC_T1S_P2MP_FEATURES,
+ .config_init = lan867x_revc1_config_init,
+ .read_status = lan86xx_read_status,
+ .get_plca_cfg = genphy_c45_plca_get_cfg,
+ .set_plca_cfg = genphy_c45_plca_set_cfg,
+ .get_plca_status = genphy_c45_plca_get_status,
+ },
{
PHY_ID_MATCH_EXACT(PHY_ID_LAN865X_REVB0),
.name = "LAN865X Rev.B0 Internal Phy",
@@ -305,6 +400,7 @@ module_phy_driver(microchip_t1s_driver);
static struct mdio_device_id __maybe_unused tbl[] = {
{ PHY_ID_MATCH_EXACT(PHY_ID_LAN867X_REVB1) },
+ { PHY_ID_MATCH_EXACT(PHY_ID_LAN867X_REVC1) },
{ PHY_ID_MATCH_EXACT(PHY_ID_LAN865X_REVB0) },
{ }
};
--
2.40.1
Powered by blists - more mailing lists