| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZWR4cN0sJNcVHPrL@matsya>
Date: Mon, 27 Nov 2023 16:37:28 +0530
From: Vinod Koul <vkoul@...nel.org>
To: Can Guo <quic_cang@...cinc.com>
Cc: bvanassche@....org, mani@...nel.org, adrian.hunter@...el.com,
beanhuo@...ron.com, avri.altman@....com, junwoo80.lee@...sung.com,
martin.petersen@...cle.com, linux-scsi@...r.kernel.org,
linux-arm-msm@...r.kernel.org, Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Johan Hovold <johan+linaro@...nel.org>,
Abel Vesa <abel.vesa@...aro.org>,
"open list:GENERIC PHY FRAMEWORK" <linux-phy@...ts.infradead.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v5 08/10] phy: qualcomm: phy-qcom-qmp-ufs: Rectify SM8550
UFS HS-G4 PHY Settings
On 23-11-23, 00:46, Can Guo wrote:
> The registers, which are being touched in current SM8550 UFS PHY settings,
> and the values being programmed are mainly the ones working for HS-G4 mode,
> meanwhile, there are also a few ones somehow taken from HS-G5 PHY settings.
> However, even consider HS-G4 mode only, some of them are incorrect and some
> are missing. Rectify the HS-G4 PHY settings by strictly aligning with the
> SM8550 UFS PHY Hardware Programming Guide suggested HS-G4 PHY settings.
can you copy on cover so that we know the context of the series, I just
got hit with two patches out of the blue with this
>
> Fixes: 1679bfef906f ("phy: qcom-qmp-ufs: Add SM8550 support")
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
> Reviewed-by: Abel Vesa <abel.vesa@...aro.org>
> Signed-off-by: Can Guo <quic_cang@...cinc.com>
> ---
> .../qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h | 3 +++
> drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 28 +++++++++++++++-------
> 2 files changed, 22 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h
> index 15bcb4b..674f158 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h
> @@ -10,9 +10,12 @@
> #define QSERDES_UFS_V6_TX_RES_CODE_LANE_RX 0x2c
> #define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX 0x30
> #define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_RX 0x34
> +#define QSERDES_UFS_V6_TX_LANE_MODE_1 0x7c
> +#define QSERDES_UFS_V6_TX_FR_DCC_CTRL 0x108
>
> #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2 0x08
> #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4 0x10
> +#define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2 0xd4
> #define QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL 0x178
> #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0 0x208
> #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1 0x20c
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> index 3927eba..ad91f92 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> @@ -658,22 +658,26 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = {
> QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14),
> QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x7f),
> QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x06),
> - QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x4c),
> - QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a),
> - QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18),
> - QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14),
> - QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x99),
> - QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x4c),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x0a),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x14),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x99),
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8550_ufsphy_hs_b_serdes[] = {
> + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44),
> };
>
> static const struct qmp_phy_init_tbl sm8550_ufsphy_tx[] = {
> - QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_1, 0x05),
> + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_LANE_MODE_1, 0x05),
> QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x07),
> + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_FR_DCC_CTRL, 0x4c),
> };
>
> static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = {
> - QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2, 0x0c),
> - QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4, 0x0f),
> + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2, 0x0c),
> QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e),
>
> QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xc2),
> @@ -696,6 +700,8 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_pcs[] = {
> QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
> QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b),
> QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
> + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04),
> + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04),
> };
>
> struct qmp_ufs_offsets {
> @@ -1157,6 +1163,10 @@ static const struct qmp_phy_cfg sm8550_ufsphy_cfg = {
> .pcs = sm8550_ufsphy_pcs,
> .pcs_num = ARRAY_SIZE(sm8550_ufsphy_pcs),
> },
> + .tbls_hs_b = {
> + .serdes = sm8550_ufsphy_hs_b_serdes,
> + .serdes_num = ARRAY_SIZE(sm8550_ufsphy_hs_b_serdes),
> + },
> .clk_list = sdm845_ufs_phy_clk_l,
> .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> .vreg_list = qmp_phy_vreg_l,
> --
> 2.7.4
--
~Vinod
Powered by blists - more mailing lists