[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231127-adin-fld-v1-1-797f6423fd48@axis.com>
Date: Mon, 27 Nov 2023 16:31:39 +0100
From: Vincent Whitchurch <vincent.whitchurch@...s.com>
To: Michael Hennerich <michael.hennerich@...log.com>,
Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
"Eric Dumazet" <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<kernel@...s.com>, Vincent Whitchurch <vincent.whitchurch@...s.com>
Subject: [PATCH net-next] net: phy: adin: allow control of Fast Link Down
Add support to allow Fast Link Down (aka "Enhanced link detection") to
be controlled via the ETHTOOL_PHY_FAST_LINK_DOWN tunable. These PHYs
have this feature enabled by default.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@...s.com>
---
drivers/net/phy/adin.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c
index 134637584a83..2e1a46e121d9 100644
--- a/drivers/net/phy/adin.c
+++ b/drivers/net/phy/adin.c
@@ -68,6 +68,24 @@
#define ADIN1300_EEE_CAP_REG 0x8000
#define ADIN1300_EEE_ADV_REG 0x8001
#define ADIN1300_EEE_LPABLE_REG 0x8002
+
+#define ADIN1300_FLD_EN_REG 0x8E27
+#define ADIN1300_FLD_PCS_ERR_100_EN BIT(7)
+#define ADIN1300_FLD_PCS_ERR_1000_EN BIT(6)
+#define ADIN1300_FLD_SLCR_OUT_STUCK_100_EN BIT(5)
+#define ADIN1300_FLD_SLCR_OUT_STUCK_1000_EN BIT(4)
+#define ADIN1300_FLD_SLCR_IN_ZDET_100_EN BIT(3)
+#define ADIN1300_FLD_SLCR_IN_ZDET_1000_EN BIT(2)
+#define ADIN1300_FLD_SLCR_IN_INVLD_100_EN BIT(1)
+#define ADIN1300_FLD_SLCR_IN_INVLD_1000_EN BIT(0)
+/* These bits are the ones which are enabled by default. */
+#define ADIN1300_FLD_EN_ON \
+ (ADIN1300_FLD_SLCR_OUT_STUCK_100_EN | \
+ ADIN1300_FLD_SLCR_OUT_STUCK_1000_EN | \
+ ADIN1300_FLD_SLCR_IN_ZDET_100_EN | \
+ ADIN1300_FLD_SLCR_IN_ZDET_1000_EN | \
+ ADIN1300_FLD_SLCR_IN_INVLD_1000_EN)
+
#define ADIN1300_CLOCK_STOP_REG 0x9400
#define ADIN1300_LPI_WAKE_ERR_CNT_REG 0xa000
@@ -416,6 +434,37 @@ static int adin_set_edpd(struct phy_device *phydev, u16 tx_interval)
val);
}
+static int adin_get_fast_down(struct phy_device *phydev, u8 *msecs)
+{
+ int reg;
+
+ reg = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_FLD_EN_REG);
+ if (reg < 0)
+ return reg;
+
+ if (reg & ADIN1300_FLD_EN_ON)
+ *msecs = ETHTOOL_PHY_FAST_LINK_DOWN_ON;
+ else
+ *msecs = ETHTOOL_PHY_FAST_LINK_DOWN_OFF;
+
+ return 0;
+}
+
+static int adin_set_fast_down(struct phy_device *phydev, const u8 *msecs)
+{
+ if (*msecs == ETHTOOL_PHY_FAST_LINK_DOWN_ON)
+ return phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
+ ADIN1300_FLD_EN_REG,
+ ADIN1300_FLD_EN_ON);
+
+ if (*msecs == ETHTOOL_PHY_FAST_LINK_DOWN_OFF)
+ return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+ ADIN1300_FLD_EN_REG,
+ ADIN1300_FLD_EN_ON);
+
+ return -EINVAL;
+}
+
static int adin_get_tunable(struct phy_device *phydev,
struct ethtool_tunable *tuna, void *data)
{
@@ -424,6 +473,8 @@ static int adin_get_tunable(struct phy_device *phydev,
return adin_get_downshift(phydev, data);
case ETHTOOL_PHY_EDPD:
return adin_get_edpd(phydev, data);
+ case ETHTOOL_PHY_FAST_LINK_DOWN:
+ return adin_get_fast_down(phydev, data);
default:
return -EOPNOTSUPP;
}
@@ -437,6 +488,8 @@ static int adin_set_tunable(struct phy_device *phydev,
return adin_set_downshift(phydev, *(const u8 *)data);
case ETHTOOL_PHY_EDPD:
return adin_set_edpd(phydev, *(const u16 *)data);
+ case ETHTOOL_PHY_FAST_LINK_DOWN:
+ return adin_set_fast_down(phydev, data);
default:
return -EOPNOTSUPP;
}
---
base-commit: e1df5202e879bce09845ac62bae30206e1edfb80
change-id: 20231127-adin-fld-c072c3b79a5a
Best regards,
--
Vincent Whitchurch <vincent.whitchurch@...s.com>
Powered by blists - more mailing lists