[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231125-topic-rb1_feat-v2-11-979b28f35e4a@linaro.org>
Date: Mon, 27 Nov 2023 16:28:51 +0100
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Rob Clark <robdclark@...il.com>,
Abhinav Kumar <quic_abhinavk@...cinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Sean Paul <sean@...rly.run>, David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Loic Poulain <loic.poulain@...aro.org>,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Georgi Djakov <djakov@...nel.org>,
Will Deacon <will@...nel.org>,
Robin Murphy <robin.murphy@....com>,
Joerg Roedel <joro@...tes.org>,
Krishna Manikandan <quic_mkrishn@...cinc.com>,
Robert Marko <robimarko@...il.com>,
Das Srinagesh <quic_gurus@...cinc.com>,
cros-qcom-dts-watchers@...omium.org
Cc: Marijn Suijten <marijn.suijten@...ainline.org>,
Rob Herring <robh@...nel.org>, linux-arm-msm@...r.kernel.org,
dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
iommu@...ts.linux.dev, Konrad Dybcio <konrad.dybcio@...aro.org>
Subject: [PATCH v2 11/12] arm64: dts: qcom: qrb2210-rb1: Enable CAN bus
controller
Enable the Microchip mcp2518fd hosted on the SPI5 bus.
Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
index ac6584164058..ac597eb3fe9d 100644
--- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
+++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
@@ -23,6 +23,14 @@ chosen {
stdout-path = "serial0:115200n8";
};
+ clocks {
+ clk40M: can-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <40000000>;
+ #clock-cells = <0>;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
label = "gpio-keys";
@@ -449,6 +457,20 @@ &sdhc_2 {
status = "okay";
};
+&spi5 {
+ status = "okay";
+
+ can@0 {
+ compatible = "microchip,mcp2518fd";
+ reg = <0>;
+ interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk40M>;
+ spi-max-frequency = <10000000>;
+ vdd-supply = <&vdc_5v>;
+ xceiver-supply = <&vdc_5v>;
+ };
+};
+
&tlmm {
lt9611_rst_pin: lt9611-rst-state {
pins = "gpio41";
--
2.43.0
Powered by blists - more mailing lists