linux-kernel - Re: [PATCH v2 12/12] [UNTESTED] riscv: dts: starfive: beaglev-starlight: Enable gmac

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <2f06ce36-0dc1-495e-b6a6-318951a53e8d@collabora.com>
Date:   Tue, 28 Nov 2023 02:40:43 +0200
From:   Cristian Ciocaltea <cristian.ciocaltea@...labora.com>
To:     Emil Renner Berthing <emil.renner.berthing@...onical.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Emil Renner Berthing <kernel@...il.dk>,
        Samin Guo <samin.guo@...rfivetech.com>,
        Paul Walmsley <paul.walmsley@...ive.com>,
        Palmer Dabbelt <palmer@...belt.com>,
        Albert Ou <aou@...s.berkeley.edu>,
        Alexandre Torgue <alexandre.torgue@...s.st.com>,
        Jose Abreu <joabreu@...opsys.com>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Richard Cochran <richardcochran@...il.com>,
        Giuseppe Cavallaro <peppe.cavallaro@...com>
Cc:     netdev@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org,
        linux-stm32@...md-mailman.stormreply.com,
        linux-arm-kernel@...ts.infradead.org, kernel@...labora.com
Subject: Re: [PATCH v2 12/12] [UNTESTED] riscv: dts: starfive:
 beaglev-starlight: Enable gmac

On 11/26/23 23:10, Emil Renner Berthing wrote:
> Cristian Ciocaltea wrote:
>> The BeagleV Starlight SBC uses a Microchip KSZ9031RNXCA PHY supporting
>> RGMII-ID.
>>
>> TODO: Verify if manual adjustment of the RX internal delay is needed. If
>> yes, add the mdio & phy sub-nodes.
> 
> Sorry for being late here. I've tested that removing the mdio and phy nodes on
> the the Starlight board works fine, but the rx-internal-delay-ps = <900>
> property not needed on any of my VisionFive V1 boards either. 

No problem, thanks a lot for taking the time to help with the testing!

> So I wonder why you need that on your board

I noticed you have a patch 70ca054e82b5 ("net: phy: motorcomm: Disable
rgmii rx delay") in your tree, hence I you please confirm the tests were
done with that commit reverted?

> Also in the driver patch you add support for phy-mode = "rgmii-txid", but here
> you still set it to "rgmii-id", so which is it?

Please try with "rgmii-id" first. I added "rgmii-txid" to have a
fallback solution in case the former cannot be used.

> You've alse removed the phy reset gpio on the Starlight board:
> 
>   snps,reset-gpios = <&gpio 63 GPIO_ACTIVE_LOW>
> 
> Why?

I missed this in v1 as the gmac handling was done exclusively in
jh7100-common. Thanks for noticing!

>>
>> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@...labora.com>
>> ---
>>  arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts | 5 +++++
>>  1 file changed, 5 insertions(+)
>>
>> diff --git a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
>> index 7cda3a89020a..d3f4c99d98da 100644
>> --- a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
>> +++ b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
>> @@ -11,3 +11,8 @@ / {
>>  	model = "BeagleV Starlight Beta";
>>  	compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100";
>>  };
>> +
>> +&gmac {
>> +	phy-mode = "rgmii-id";
>> +	status = "okay";
>> +};
> 
> Lastly the phy-mode and status are the same for the VF1 and Starlight boards,
> so why can't these be set in the jh7100-common.dtsi?

I wasn't sure "rgmii-id" can be used for both boards and I didn't want
to unconditionally enable gmac on Starlight before getting a
confirmation that this actually works.

If there is no way to make it working with "rgmii-id" (w/ or w/o
adjusting rx-internal-delay-ps), than we should switch to "rgmii-txid".

Thanks,
Cristian