Message-ID: <z6r4jvuo63deg5ezzrxiewuzgdfwvcluzp45r4gmu7vwx6fmlm@d5r6phck2ovh>
Date:   Tue, 28 Nov 2023 13:51:32 +0300
From:   Serge Semin <fancer.lancer@...il.com>
To:     Mike Rapoport <rppt@...nel.org>
Cc:     Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
        Andrew Morton <akpm@...ux-foundation.org>,
        Matthew Wilcox <willy@...radead.org>,
        Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>,
        Arnd Bergmann <arnd@...db.de>,
        Aleksandar Rikalo <aleksandar.rikalo@...mia.com>,
        Aleksandar Rikalo <arikalo@...il.com>,
        Dragan Mladjenovic <dragan.mladjenovic@...mia.com>,
        Chao-ying Fu <cfu@...ecomp.com>,
        Jiaxun Yang <jiaxun.yang@...goat.com>,
        Yinglu Yang <yangyinglu@...ngson.cn>,
        Tiezhu Yang <yangtiezhu@...ngson.cn>,
        Marc Zyngier <maz@...nel.org>, linux-mips@...r.kernel.org,
        linux-mm@...ck.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 5/7] mm/mm_init.c: Extend init unavailable range doc info

On Tue, Nov 28, 2023 at 09:13:39AM +0200, Mike Rapoport wrote:
> On Fri, Nov 24, 2023 at 02:18:44PM +0300, Serge Semin wrote:
> > On Fri, Nov 24, 2023 at 10:19:00AM +0200, Mike Rapoport wrote:
> > > On Thu, Nov 23, 2023 at 01:42:39PM +0300, Serge Semin wrote:
> > > > On Thu, Nov 23, 2023 at 12:18:54PM +0200, Mike Rapoport wrote:
> > > > > On Wed, Nov 22, 2023 at 09:24:03PM +0300, Serge Semin wrote:
> > > > > > Besides of the already described reasons the pages backended memory holes
> > > > > > might be persistent due to having memory mapped IO spaces behind those
> > > > > > ranges in the framework of flatmem kernel config. Add such note to the
> > > > > > init_unavailable_range() method kdoc in order to point out to one more
> > > > > > reason of having the function executed for such regions.
> > > > > > 
> > > > > > Signed-off-by: Serge Semin <fancer.lancer@...il.com>
> > > > > > 
> > > > > > ---
> > > > > > 
> > > > > > Please let me know if the IO-space pages must be initialized somehow
> > > > > > differently rather relying on free_area_init() executing the
> > > > > > init_unavailable_range() method.
> > > > > 
> > > > 
> > > > > Maybe I'm missing something, but why do you need struct pages in the
> > > > > IO space?
> > > > 
> > > > In my case at the very least that's due to having a SRAM device
> > > > available in the middle of the MMIO-space. The region is getting
> > > > mapped using the ioremap_wc() method (Uncached Write-Combine CA),
> > > > which eventually is converted to calling get_vm_area() and
> > > > ioremap_page_range() (see ioremap_prot() function on MIPS), which in
> > > > its turn use the page structs for mapping. Another similar case is
> > > > using ioremap_wc() in the PCIe outbound ATU space mapping of
> > > > the graphic/video cards framebuffers.
> > > 
> > > ioremap_page_range() does not need struct pages, but rather physical
> > > addresses.
> > 
> > Unless I miss something or MIPS32 is somehow special/wrong in that
> > matter, but from my just got experience it actually does at least in
> > the framework of the __update_cache() implementation which is called
> > in the set_ptes() method (former set_pte_at()), which in its turn
> > is eventually invoked by vmap_range_noflush() and finally by
> > ioremap_page_range(). See the patch
> > [PATCH 3/7] mips: Fix max_mapnr being uninitialized on early stages
> > Link: https://lore.kernel.org/linux-mips/20231122182419.30633-4-fancer.lancer@gmail.com/
> > of this series and the stack-trace of the bug fixed by that patch.
> > 
> > Is it wrong that on MIPS32 ioremap_page_range() eventually relies on
> > the page structs? It has been like that for, I don't know, long time.
> > If so then the sparse memory config might be broken on MIPS32..(
>  

> Do you mind posting your physical memory layout?

I actually already did in response to the last part of your previous
message. You must have missed it. Here is the copy of the message:

> On Fri, Nov 24, 2023 at 02:18:44PM +0300, Serge Semin wrote:
> > On Fri, Nov 24, 2023 at 10:19:00AM +0200, Mike Rapoport wrote:
> > ...
> > > 
> > > My guess is that your system has a hole in the physical memory mappings and
> > > with FLATMEM that hole will have essentially unused struct pages, which are
> > > initialized by init_unavailable_range().  But from mm perspective this is
> > > still a hole even though there's some MMIO ranges in that hole.
> > 
> > Absolutely right. Here is the physical memory layout in my system.
> > 0     - 128MB: RAM
> > 128MB - 512MB: Memory mapped IO
> > 512MB - 768MB..8.256GB: RAM
> > 
> > > 
> > > Now, if that hole is large you are wasting memory for unused memory map and
> > > it maybe worth considering using SPARSEMEM.
> > 
> > Do you think it's worth to move to the sparse memory configuration in
> > order to save the 384MB of mapping with the 16K page model? AFAIU flat
> > memory config is more performant. Performance is critical on the most
> > of the SoC applications especially when using the 10G ethernet or
> > the high-speed PCIe devices.
> ...

Could you also answer to my question above regarding using the
sparsemem instead on my hw memory layout?

> 
> If I understand correctly, you have a hole in your RAM and there is MMIO
> region somewhere in that hole.

Absolutely right. Please see my messages above.

> With FLATMEM the memory map exists for that
> hole and hence pfn_valid() returns 1 for the MMIO range as well. That makes
> __update_cache() to check folio state and that check would fail if the memory
> map contained garbage. But since the hole in the memory map is initialized
> with init_unavailable_range() you get a valid struct page/struct folio and
> everything is fine.

Right. That's what currently happens on MIPS32 and that's what I had
to fix in the framework of this series by the next patch:
Link: https://lore.kernel.org/linux-mips/20231122182419.30633-4-fancer.lancer@gmail.com/
flatmem version of the pfn_valid() method has been broken due to
max_mapnr being uninitialized before mem_init() is called. So
init_unavailable_range() didn't initialize the pages on the early
bootup stage. Thus afterwards, when max_mapnr has finally got a valid
value any attempts to call the __update_cache() method on the MMIO
memory hole caused the unaligned access crash.

> 
> With that, the init_unavailable_range() docs need not mention IO space at
> all, they should mention holes within FLATMEM memory map.

Ok. I'll resend the patch with mentioning flatmem holes instead of
mentioning the IO-spaces.

> 
> As for SPARSEMEM, if the hole does not belong to any section, pfn_valid()
> will be false for it and __update_cache() won't try to access memory map.

Ah, I see. In case of the SPARSEMEM config an another version of
pfn_valid() will be called. It's defined in the include/linux/mmzone.h
header file. Right? If so then no problem there indeed.

-Serge(y)

>   
> > > > In general having the pages array defined for the IO-memory is
> > > > required for mapping the IO-space other than just uncached (my sram
> > > > case for example) or, for instance, with special access attribute for
> > > > the user-space (if I am not missing something in a way VM works in
> > > > that case).
> > > 
> > 
> > > No, struct pages are not required to map IO space. If you need to map MMIO
> > > to userspace there's remap_pfn_range() for that.
> > 
> > Is this correct for both flat and sparse memory config? In anyway
> > please see my comment above about the problem I recently got.
> > 
> > > 
> > > My guess is that your system has a hole in the physical memory mappings and
> > > with FLATMEM that hole will have essentially unused struct pages, which are
> > > initialized by init_unavailable_range().  But from mm perspective this is
> > > still a hole even though there's some MMIO ranges in that hole.
> > 
> > Absolutely right. Here is the physical memory layout in my system.
> > 0     - 128MB: RAM
> > 128MB - 512MB: Memory mapped IO
> > 512MB - 768MB..8.256GB: RAM
> > 
> > > 
> > > Now, if that hole is large you are wasting memory for unused memory map and
> > > it maybe worth considering using SPARSEMEM.
> > 
> > Do you think it's worth to move to the sparse memory configuration in
> > order to save the 384MB of mapping with the 16K page model? AFAIU flat
> > memory config is more performant. Performance is critical on the most
> > of the SoC applications especially when using the 10G ethernet or
> > the high-speed PCIe devices.
> > 
> > -Serge(y)
> > 
> > >  
> > > > -Serge(y)
> > > > 
> > > > > 
> > > > > > ---
> > > > > >  mm/mm_init.c | 1 +
> > > > > >  1 file changed, 1 insertion(+)
> > > > > > 
> > > > > > diff --git a/mm/mm_init.c b/mm/mm_init.c
> > > > > > index 077bfe393b5e..3fa33e2d32ba 100644
> > > > > > --- a/mm/mm_init.c
> > > > > > +++ b/mm/mm_init.c
> > > > > > @@ -796,6 +796,7 @@ overlap_memmap_init(unsigned long zone, unsigned long *pfn)
> > > > > >   * - physical memory bank size is not necessarily the exact multiple of the
> > > > > >   *   arbitrary section size
> > > > > >   * - early reserved memory may not be listed in memblock.memory
> > > > > > + * - memory mapped IO space
> > > > > >   * - memory layouts defined with memmap= kernel parameter may not align
> > > > > >   *   nicely with memmap sections
> > > > > >   *
> > > > > > -- 
> > > > > > 2.42.1
> > > > > > 
> > > > > 
> > > > > -- 
> > > > > Sincerely yours,
> > > > > Mike.
> > > > > 
> > > 
> > > -- 
> > > Sincerely yours,
> > > Mike.
> 
> -- 
> Sincerely yours,
> Mike.

Powered by blists - more mailing lists