lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <18276c95-26e8-4b07-8351-7555d7595f7c@linaro.org>
Date:   Tue, 28 Nov 2023 12:03:47 +0100
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     Jacky Huang <ychuang570808@...il.com>, linus.walleij@...aro.org,
        robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
        conor+dt@...nel.org, p.zabel@...gutronix.de, j.neuschaefer@....net
Cc:     linux-arm-kernel@...ts.infradead.org, linux-gpio@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        ychuang3@...oton.com, schung@...oton.com
Subject: Re: [PATCH v2 3/4] arm64: dts: nuvoton: Add pinctrl support for
 ma35d1

On 28/11/2023 07:11, Jacky Huang wrote:
> From: Jacky Huang <ychuang3@...oton.com>
> 

...

>  
>  		sys: system-management@...60000 {
> -			compatible = "nuvoton,ma35d1-reset";
> +			compatible = "nuvoton,ma35d1-reset", "syscon";
>  			reg = <0x0 0x40460000 0x0 0x200>;
>  			#reset-cells = <1>;
>  		};
> @@ -95,6 +96,162 @@ clk: clock-controller@...60200 {
>  			clocks = <&clk_hxt>;
>  		};
>  
> +		pinctrl: pinctrl@...40000 {
> +			compatible = "nuvoton,ma35d1-pinctrl";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			nuvoton,sys = <&sys>;
> +			ranges = <0x0 0x0 0x40040000 0xc00>;
> +
> +			gpioa: gpio@...40000 {
> +				reg = <0x0 0x40>;

Your unit address does not match reg.

You must test your DTS with `dtbs_check W=1`.


> +				interrupts = <GIC_SPI  14 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&clk GPA_GATE>;
> +				gpio-controller;
> +				#gpio-cells = <2>;


Best regards,
Krzysztof

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ