| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <b080d7ba-7cf4-850f-d40d-49e661a0d698@quicinc.com>
Date: Tue, 28 Nov 2023 19:22:53 +0530
From: Komal Bajaj <quic_kbajaj@...cinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
CC: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
<linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v6 2/3] arm64: dts: qcom: Add base qcm6490 idp board dts
On 11/24/2023 6:48 PM, Dmitry Baryshkov wrote:
> On Fri, 24 Nov 2023 at 14:13, Komal Bajaj <quic_kbajaj@...cinc.com> wrote:
>>
>> Add DTS for Qualcomm IDP platform using QCM6490 SoC.
>> This adds debug uart, eMMC and usb support along with
>> regulators found on this board.
>>
>> Signed-off-by: Komal Bajaj <quic_kbajaj@...cinc.com>
>> Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
>> ---
>> arch/arm64/boot/dts/qcom/Makefile | 1 +
>> arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 464 +++++++++++++++++++++++
>> 2 files changed, 465 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/qcom/qcm6490-idp.dts
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index d6cb840b7050..77babebe4904 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -87,6 +87,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb
>> +dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
>> new file mode 100644
>> index 000000000000..78ace02e42c0
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
>> @@ -0,0 +1,464 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>> +#include "sc7280.dtsi"
>> +#include "pm7325.dtsi"
>> +#include "pm8350c.dtsi"
>> +#include "pmk8350.dtsi"
>> +
>> +/delete-node/ &ipa_fw_mem;
>> +/delete-node/ &rmtfs_mem;
>> +/delete-node/ &video_mem;
>> +/delete-node/ &wlan_ce_mem;
>> +/delete-node/ &xbl_mem;
>> +
>> +/ {
>> + model = "Qualcomm Technologies, Inc. QCM6490 IDP";
>> + compatible = "qcom,qcm6490-idp", "qcom,qcm6490";
>> +
>> + aliases {
>> + serial0 = &uart5;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial0:115200n8";
>> + };
>> +
>> + reserved-memory {
>> + xbl_mem: xbl@...00000 {
>> + reg = <0x0 0x80700000 0x0 0x100000>;
>> + no-map;
>> + };
>> +
>> + cdsp_secure_heap_mem: cdsp-secure-heap@...00000 {
>> + reg = <0x0 0x81800000 0x0 0x1e00000>;
>> + no-map;
>> + };
>> +
>> + camera_mem: camera@...00000 {
>> + reg = <0x0 0x84300000 0x0 0x500000>;
>> + no-map;
>> + };
>> +
>> + wpss_mem: wpss@...00000 {
>> + reg = <0x0 0x84800000 0x0 0x1900000>;
>> + no-map;
>> + };
>> +
>> + adsp_mem: adsp@...00000 {
>> + reg = <0x0 0x86100000 0x0 0x2800000>;
>> + no-map;
>> + };
>> +
>> + cdsp_mem: cdsp@...00000 {
>> + reg = <0x0 0x88900000 0x0 0x1e00000>;
>> + no-map;
>> + };
>> +
>> + video_mem: video@...00000 {
>> + reg = <0x0 0x8a700000 0x0 0x700000>;
>> + no-map;
>> + };
>> +
>> + cvp_mem: cvp@...00000 {
>> + reg = <0x0 0x8ae00000 0x0 0x500000>;
>> + no-map;
>> + };
>> +
>> + ipa_fw_mem: ipa-fw@...00000 {
>> + reg = <0x0 0x8b300000 0x0 0x10000>;
>> + no-map;
>> + };
>> +
>> + ipa_gsi_mem: ipa-gsi@...10000 {
>> + reg = <0x0 0x8b310000 0x0 0xa000>;
>> + no-map;
>> + };
>> +
>> + gpu_microcode_mem: gpu-microcode@...1a000 {
>> + reg = <0x0 0x8b31a000 0x0 0x2000>;
>> + no-map;
>> + };
>> +
>> + mpss_mem: mpss@...00000 {
>> + reg = <0x0 0x8b800000 0x0 0xf600000>;
>> + no-map;
>> + };
>> +
>> + tz_stat_mem: tz-stat@...00000 {
>> + reg = <0x0 0xc0000000 0x0 0x100000>;
>> + no-map;
>> + };
>> +
>> + tags_mem: tags@...00000 {
>> + reg = <0x0 0xc0100000 0x0 0x1200000>;
>> + no-map;
>> + };
>> +
>> + qtee_mem: qtee@...00000 {
>> + reg = <0x0 0xc1300000 0x0 0x500000>;
>> + no-map;
>> + };
>> +
>> + trusted_apps_mem: trusted_apps@...00000 {
>> + reg = <0x0 0xc1800000 0x0 0x1c00000>;
>> + no-map;
>> + };
>> +
>> + debug_vm_mem: debug-vm@...00000 {
>> + reg = <0x0 0xd0600000 0x0 0x100000>;
>> + no-map;
>> + };
>> + };
>> +
>> + vph_pwr: vph-pwr-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vph_pwr";
>> + regulator-min-microvolt = <2500000>;
>> + regulator-max-microvolt = <4350000>;
>> + };
>> +};
>> +
>> +&apps_rsc {
>> + regulators-0 {
>> + compatible = "qcom,pm7325-rpmh-regulators";
>> + qcom,pmic-id = "b";
>> +
>> + vdd-s1-supply = <&vph_pwr>;
>> + vdd-s2-supply = <&vph_pwr>;
>> + vdd-s3-supply = <&vph_pwr>;
>> + vdd-s4-supply = <&vph_pwr>;
>> + vdd-s5-supply = <&vph_pwr>;
>> + vdd-s6-supply = <&vph_pwr>;
>> + vdd-s7-supply = <&vph_pwr>;
>> + vdd-s8-supply = <&vph_pwr>;
>> + vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
>> + vdd-l2-l7-supply = <&vreg_bob_3p296>;
>> + vdd-l3-supply = <&vreg_s2b_0p876>;
>> + vdd-l5-supply = <&vreg_s2b_0p876>;
>> + vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
>> + vdd-l8-supply = <&vreg_s7b_0p972>;
>> + vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
>> + vdd-l13-supply = <&vreg_s7b_0p972>;
>> + vdd-l14-l16-supply = <&vreg_s8b_1p272>;
>> +
>> + vreg_s1b_1p872: smps1 {
>> + regulator-min-microvolt = <1840000>;
>> + regulator-max-microvolt = <2040000>;
>> + };
>> +
>> + vreg_s2b_0p876: smps2 {
>> + regulator-min-microvolt = <570070>;
>> + regulator-max-microvolt = <1050000>;
>> + };
>> +
>> + vreg_s7b_0p972: smps7 {
>> + regulator-min-microvolt = <535000>;
>> + regulator-max-microvolt = <1120000>;
>> + };
>> +
>> + vreg_s8b_1p272: smps8 {
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1500000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
>> + };
>> +
>> + vreg_l1b_0p912: ldo1 {
>> + regulator-min-microvolt = <825000>;
>> + regulator-max-microvolt = <925000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l2b_3p072: ldo2 {
>> + regulator-min-microvolt = <2700000>;
>> + regulator-max-microvolt = <3544000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l3b_0p504: ldo3 {
>> + regulator-min-microvolt = <312000>;
>> + regulator-max-microvolt = <910000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l4b_0p752: ldo4 {
>> + regulator-min-microvolt = <752000>;
>> + regulator-max-microvolt = <820000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + reg_l5b_0p752: ldo5 {
>> + regulator-min-microvolt = <552000>;
>> + regulator-max-microvolt = <832000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l6b_1p2: ldo6 {
>> + regulator-min-microvolt = <1140000>;
>> + regulator-max-microvolt = <1260000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l7b_2p952: ldo7 {
>> + regulator-min-microvolt = <2400000>;
>> + regulator-max-microvolt = <3544000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l8b_0p904: ldo8 {
>> + regulator-min-microvolt = <870000>;
>> + regulator-max-microvolt = <970000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l9b_1p2: ldo9 {
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1304000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l11b_1p504: ldo11 {
>> + regulator-min-microvolt = <1504000>;
>> + regulator-max-microvolt = <2000000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l12b_0p751: ldo12 {
>> + regulator-min-microvolt = <751000>;
>> + regulator-max-microvolt = <824000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l13b_0p53: ldo13 {
>> + regulator-min-microvolt = <530000>;
>> + regulator-max-microvolt = <824000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l14b_1p08: ldo14 {
>> + regulator-min-microvolt = <1080000>;
>> + regulator-max-microvolt = <1304000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l15b_0p765: ldo15 {
>> + regulator-min-microvolt = <765000>;
>> + regulator-max-microvolt = <1020000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l16b_1p1: ldo16 {
>> + regulator-min-microvolt = <1100000>;
>> + regulator-max-microvolt = <1300000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l17b_1p7: ldo17 {
>> + regulator-min-microvolt = <1700000>;
>> + regulator-max-microvolt = <1900000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l18b_1p8: ldo18 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <2000000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l19b_1p8: ldo19 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <2000000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + regulator-allow-set-load;
>> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
>> + RPMH_REGULATOR_MODE_HPM>;
>> + };
>> + };
>> +
>> + regulators-1 {
>> + compatible = "qcom,pm8350c-rpmh-regulators";
>> + qcom,pmic-id = "c";
>> +
>> + vdd-s1-supply = <&vph_pwr>;
>> + vdd-s2-supply = <&vph_pwr>;
>> + vdd-s3-supply = <&vph_pwr>;
>> + vdd-s4-supply = <&vph_pwr>;
>> + vdd-s5-supply = <&vph_pwr>;
>> + vdd-s6-supply = <&vph_pwr>;
>> + vdd-s7-supply = <&vph_pwr>;
>> + vdd-s8-supply = <&vph_pwr>;
>> + vdd-s9-supply = <&vph_pwr>;
>> + vdd-s10-supply = <&vph_pwr>;
>> + vdd-l1-l12-supply = <&vreg_s1b_1p872>;
>> + vdd-l2-l8-supply = <&vreg_s1b_1p872>;
>> + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
>> + vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
>> + vdd-l10-supply = <&vreg_s7b_0p972>;
>> + vdd-bob-supply = <&vph_pwr>;
>> +
>> + vreg_s1c_2p19: smps1 {
>> + regulator-min-microvolt = <2190000>;
>> + regulator-max-microvolt = <2210000>;
>> + };
>> +
>> + vreg_s2c_0p752: smps2 {
>> + regulator-min-microvolt = <750000>;
>> + regulator-max-microvolt = <800000>;
>> + };
>> +
>> + vreg_s5c_0p752: smps5 {
>> + regulator-min-microvolt = <465000>;
>> + regulator-max-microvolt = <1050000>;
>> + };
>> +
>> + vreg_s7c_0p752: smps7 {
>> + regulator-min-microvolt = <465000>;
>> + regulator-max-microvolt = <800000>;
>> + };
>> +
>> + vreg_s9c_1p084: smps9 {
>> + regulator-min-microvolt = <1010000>;
>> + regulator-max-microvolt = <1170000>;
>> + };
>> +
>> + vreg_l1c_1p8: ldo1 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1980000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l2c_1p62: ldo2 {
>> + regulator-min-microvolt = <1620000>;
>> + regulator-max-microvolt = <1980000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l3c_2p8: ldo3 {
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <3540000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l4c_1p62: ldo4 {
>> + regulator-min-microvolt = <1620000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l5c_1p62: ldo5 {
>> + regulator-min-microvolt = <1620000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l6c_2p96: ldo6 {
>> + regulator-min-microvolt = <1650000>;
>> + regulator-max-microvolt = <3544000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l7c_3p0: ldo7 {
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3544000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l8c_1p62: ldo8 {
>> + regulator-min-microvolt = <1620000>;
>> + regulator-max-microvolt = <2000000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l9c_2p96: ldo9 {
>> + regulator-min-microvolt = <2700000>;
>> + regulator-max-microvolt = <35440000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l10c_0p88: ldo10 {
>> + regulator-min-microvolt = <720000>;
>> + regulator-max-microvolt = <1050000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l11c_2p8: ldo11 {
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <3544000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l12c_1p65: ldo12 {
>> + regulator-min-microvolt = <1650000>;
>> + regulator-max-microvolt = <2000000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l13c_2p7: ldo13 {
>> + regulator-min-microvolt = <2700000>;
>> + regulator-max-microvolt = <3544000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_bob_3p296: bob {
>> + regulator-min-microvolt = <3008000>;
>> + regulator-max-microvolt = <3960000>;
>> + };
>> + };
>> +};
>> +
>> +&qupv3_id_0 {
>> + status = "okay";
>> +};
>> +
>> +&sdhc_1 {
>> + non-removable;
>> + no-sd;
>> + no-sdio;
>> +
>> + vmmc-supply = <&vreg_l7b_2p952>;
>> + vqmmc-supply = <&vreg_l19b_1p8>;
>> +
>> + status = "okay";
>> +};
>> +
>> +&tlmm {
>> + gpio-reserved-ranges = <32 2>, /* ADSP */
>> + <48 4>; /* NFC */
>> +};
>> +
>> +&uart5 {
>> + compatible = "qcom,geni-debug-uart";
>> + status = "okay";
>> +};
>> +
>> +&usb_1 {
>> + status = "okay";
>> +};
>> +
>> +&usb_1_dwc3 {
>> + dr_mode = "peripheral";
>> +};
>> +
>> +&usb_1_hsphy {
>> + vdda-pll-supply = <&vreg_l10c_0p88>;
>> + vdda33-supply = <&vreg_l2b_3p072>;
>> + vdda18-supply = <&vreg_l1c_1p8>;
>> +
>> + status = "okay";
>> +};
>> +
>> +&usb_1_qmpphy {
>> + vdda-phy-supply = <&vreg_l6b_1p2>;
>> + vdda-pll-supply = <&vreg_l1b_0p912>;
>> +
>> + status = "okay";
>> +};
>> +
>> +&wifi {
>> + memory-region = <&wlan_fw_mem>;
>
> qcom,ath11k-calibration-variant = "qualcomm-qca6490-idp";
This patch adds only base devicetree change for qcm6490, we will add
subsequent changes for wifi later. Here, I am just updating memory-
region for wifi so as not to break compilation.
Thanks
Komal
>
> Also please cc ath11k maliling list on the next submission
>
>> +};
>
>> --
>> 2.42.0
>>
>>
>
>
> --
> With best wishes
>
> Dmitry
>
Powered by blists - more mailing lists