Message-ID: <078cdd6f-7b38-497d-8480-00569c63f843@suse.de>
Date:   Wed, 29 Nov 2023 17:21:19 +0100
From:   Thomas Zimmermann <tzimmermann@...e.de>
To:     Mehdi Djait <mehdi.djait@...tlin.com>, mripard@...nel.org,
        maarten.lankhorst@...ux.intel.com, airlied@...il.com,
        daniel@...ll.ch, krzysztof.kozlowski+dt@...aro.org,
        robh+dt@...nel.org, conor+dt@...nel.org
Cc:     devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        thomas.petazzoni@...tlin.com, alexandre.belloni@...tlin.com,
        luca.ceresoli@...tlin.com, paul.kocialkowski@...tlin.com,
        dri-devel@...ts.freedesktop.org, geert@...ux-m68k.org
Subject: Re: [PATCH 2/2] drm/tiny: Add driver for the sharp LS027B7DH01 Memory
 LCD

Hi,

thanks for the patches.

Am 29.11.23 um 15:29 schrieb Mehdi Djait:
> Introduce a DRM driver for the sharp LS027B7DH01 Memory LCD.
> 
> LS027B7DH01 is a 2.7" 400x240 monochrome display connected to a SPI bus.
> The drivers implements the Multiple Lines Data Update Mode.
> External COM inversion is enabled using a PWM signal as input.
> 
> Signed-off-by: Mehdi Djait <mehdi.djait@...tlin.com>
> ---
>   MAINTAINERS                              |   7 +
>   drivers/gpu/drm/tiny/Kconfig             |   8 +
>   drivers/gpu/drm/tiny/Makefile            |   1 +
>   drivers/gpu/drm/tiny/sharp-ls027b7dh01.c | 411 +++++++++++++++++++++++
>   4 files changed, 427 insertions(+)
>   create mode 100644 drivers/gpu/drm/tiny/sharp-ls027b7dh01.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 012df8ccf34e..fb859698bd3d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -6832,6 +6832,13 @@ S:	Maintained
>   F:	Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
>   F:	drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c
>   
> +DRM DRIVER FOR SHARP LS027B7DH01 Memory LCD
> +M:	Mehdi Djait <mehdi.djait@...tlin.com>
> +S:	Maintained
> +T:	git git://anongit.freedesktop.org/drm/drm-misc
> +F:	Documentation/devicetree/bindings/display/sharp,ls027b7dh01.yaml
> +F:	drivers/gpu/drm/tiny/sharp-ls027b7dh01.c
> +
>   DRM DRIVER FOR SITRONIX ST7586 PANELS
>   M:	David Lechner <david@...hnology.com>
>   S:	Maintained
> diff --git a/drivers/gpu/drm/tiny/Kconfig b/drivers/gpu/drm/tiny/Kconfig
> index f6889f649bc1..a2ade06403ca 100644
> --- a/drivers/gpu/drm/tiny/Kconfig
> +++ b/drivers/gpu/drm/tiny/Kconfig
> @@ -186,6 +186,14 @@ config TINYDRM_REPAPER
>   
>   	  If M is selected the module will be called repaper.
>   
> +config TINYDRM_SHARP_LS027B7DH01
> +	tristate "DRM support for SHARP LS027B7DH01 display"
> +	depends on DRM && SPI
> +	select DRM_KMS_HELPER
> +	select DRM_GEM_DMA_HELPER
> +	help
> +	  DRM driver for the SHARP LS027B7DD01 LCD display.
> +
>   config TINYDRM_ST7586
>   	tristate "DRM support for Sitronix ST7586 display panels"
>   	depends on DRM && SPI
> diff --git a/drivers/gpu/drm/tiny/Makefile b/drivers/gpu/drm/tiny/Makefile
> index 76dde89a044b..b05df3afb231 100644
> --- a/drivers/gpu/drm/tiny/Makefile
> +++ b/drivers/gpu/drm/tiny/Makefile
> @@ -14,5 +14,6 @@ obj-$(CONFIG_TINYDRM_ILI9341)		+= ili9341.o
>   obj-$(CONFIG_TINYDRM_ILI9486)		+= ili9486.o
>   obj-$(CONFIG_TINYDRM_MI0283QT)		+= mi0283qt.o
>   obj-$(CONFIG_TINYDRM_REPAPER)		+= repaper.o
> +obj-$(CONFIG_TINYDRM_SHARP_LS027B7DH01)	+= sharp-ls027b7dh01.o
>   obj-$(CONFIG_TINYDRM_ST7586)		+= st7586.o
>   obj-$(CONFIG_TINYDRM_ST7735R)		+= st7735r.o
> diff --git a/drivers/gpu/drm/tiny/sharp-ls027b7dh01.c b/drivers/gpu/drm/tiny/sharp-ls027b7dh01.c
> new file mode 100644
> index 000000000000..2f58865a5c78
> --- /dev/null
> +++ b/drivers/gpu/drm/tiny/sharp-ls027b7dh01.c
> @@ -0,0 +1,411 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Sharp LS027B7DH01 Memory Display Driver
> + *
> + * Copyright (C) 2023 Andrew D'Angelo
> + * Copyright (C) 2023 Mehdi Djait <mehdi.djait@...tlin.com>
> + *
> + * The Sharp Memory LCD requires an alternating signal to prevent the buildup of
> + * a DC bias that would result in a Display that no longer can be updated. Two
> + * modes for the generation of this signal are supported:
> + *
> + * Software, EXTMODE = Low: toggling the BIT(1) of the Command and writing it at
> + * least once a second to the display.
> + *
> + * Hardware, EXTMODE = High: the alternating signal should be supplied on the
> + * EXTCOMIN pin.
> + *
> + * In this driver the Hardware mode is implemented with a PWM signal.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/pwm.h>
> +#include <linux/spi/spi.h>
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_damage_helper.h>
> +#include <drm/drm_drv.h>
> +#include <drm/drm_fbdev_generic.h>
> +#include <drm/drm_fb_dma_helper.h>
> +#include <drm/drm_format_helper.h>
> +#include <drm/drm_framebuffer.h>
> +#include <drm/drm_gem_atomic_helper.h>
> +#include <drm/drm_gem_dma_helper.h>
> +#include <drm/drm_gem_framebuffer_helper.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_probe_helper.h>
> +#include <drm/drm_simple_kms_helper.h>
> +
> +#define CMD_WRITE BIT(0)
> +#define CMD_CLEAR BIT(2)
> +
> +struct sharp_ls027b7dh01 {
> +	struct spi_device *spi;
> +
> +	struct drm_device drm;
> +	struct drm_connector connector;
> +	struct drm_simple_display_pipe pipe;

Could you please replace the simple pipe and its helpers with regular 
DRMhelpers. It should no tbe used in new drivers. It's an unnecessary 
indirection. Replacing is simple: copy the content of the data structure 
and its helpers into the driver. Maybe clean up the result, if necessary.

Best regards
Thomas

> +	const struct drm_display_mode *display_mode;
> +
> +	struct gpio_desc *enable_gpio;
> +	struct pwm_device *extcomin_pwm;
> +
> +	u8 *write_buf;
> +};
> +
> +static inline struct sharp_ls027b7dh01 *drm_to_priv(struct drm_device *drm)
> +{
> +	return container_of(drm, struct sharp_ls027b7dh01, drm);
> +}
> +
> +/**
> + * sharp_ls027b7dh01_add_headers - Add the Sharp LS027B7DH01 specific headers
> + * @write_buf: Buffer to write
> + * @clip: DRM clip rectangle area to write
> + * @dst_pitch: Pitch of the write buffer
> + *
> + * This function adds the SHARP LS027B7DH01 specific headers to the buffer for
> + * the Multiple Lines Write Mode:
> + * - The first byte will contain the write command.
> + * - Every line data starts with the line number and ends with a dummy zero
> + *   trailer byte. It should be noted here that the line numbers are indexed
> + *   from 1.
> + *
> + * Returns the size of the buffer to write to the display.
> + */
> +static size_t sharp_ls027b7dh01_add_headers(u8 *write_buf,
> +					    const struct drm_rect *clip,
> +					    const unsigned int dst_pitch)
> +{
> +	u8 line_num = clip->y1 + 1;
> +	unsigned int lines = drm_rect_height(clip);
> +	unsigned int y;
> +
> +	write_buf[0] = CMD_WRITE;
> +	write_buf[1] = line_num++;
> +
> +	for (y = 1; y < lines; y++) {
> +		write_buf[y * dst_pitch] = 0;
> +		write_buf[y * dst_pitch + 1] = line_num++;
> +	}
> +
> +	write_buf[lines * dst_pitch] = 0;
> +	write_buf[lines * dst_pitch + 1] = 0;
> +
> +	return lines * dst_pitch + 2;
> +}
> +
> +static int sharp_ls027b7dh01_prepare_buf(struct sharp_ls027b7dh01 *priv,
> +					 u8 *write_buf,
> +					 size_t *data_len,
> +					 struct drm_framebuffer *fb,
> +					 const struct drm_rect *clip)
> +{
> +	struct drm_gem_dma_object *dma_obj;
> +	struct iosys_map dst, vmap;
> +	unsigned int dst_pitch;
> +	int ret;
> +
> +	/* Leave 2 bytes to hold the line number and the trailer dummy byte. */
> +	dst_pitch = (drm_rect_width(clip) / 8) + 2;
> +
> +	dma_obj = drm_fb_dma_get_gem_obj(fb, 0);
> +
> +	ret = drm_gem_fb_begin_cpu_access(fb, DMA_FROM_DEVICE);
> +	if (ret)
> +		return ret;
> +
> +	iosys_map_set_vaddr(&dst, &write_buf[2]);
> +	iosys_map_set_vaddr(&vmap, dma_obj->vaddr);
> +
> +	drm_fb_xrgb8888_to_mono(&dst, &dst_pitch, &vmap, fb, clip);
> +
> +	drm_gem_fb_end_cpu_access(fb, DMA_FROM_DEVICE);
> +
> +	*data_len = sharp_ls027b7dh01_add_headers(write_buf, clip, dst_pitch);
> +
> +	return 0;
> +}
> +
> +static int sharp_ls027b7dh01_fb_damaged(struct drm_framebuffer *fb,
> +					const struct drm_rect *rect)
> +{
> +	struct drm_rect clip;
> +	struct sharp_ls027b7dh01 *priv;
> +	size_t data_len;
> +	int drm_index;
> +	int ret;
> +
> +	clip.x1 = 0;
> +	clip.x2 = fb->width;
> +	clip.y1 = rect->y1;
> +	clip.y2 = rect->y2;
> +
> +	priv = drm_to_priv(fb->dev);
> +
> +	if (!drm_dev_enter(fb->dev, &drm_index))
> +		return -ENODEV;
> +
> +	ret = sharp_ls027b7dh01_prepare_buf(priv, priv->write_buf, &data_len, fb, &clip);
> +	if (ret)
> +		goto exit;
> +
> +	ret = spi_write(priv->spi, priv->write_buf, data_len);
> +
> +exit:
> +	drm_dev_exit(drm_index);
> +
> +	return ret;
> +}
> +
> +static void sharp_ls027b7dh01_pipe_update(struct drm_simple_display_pipe *pipe,
> +					  struct drm_plane_state *old_state)
> +{
> +	struct drm_plane_state *state = pipe->plane.state;
> +	struct drm_rect rect;
> +
> +	if (!pipe->crtc.state->active)
> +		return;
> +
> +	if (drm_atomic_helper_damage_merged(old_state, state, &rect))
> +		sharp_ls027b7dh01_fb_damaged(state->fb, &rect);
> +}
> +
> +static void sharp_ls027b7dh01_pipe_disable(struct drm_simple_display_pipe *pipe)
> +{
> +	struct sharp_ls027b7dh01 *priv;
> +
> +	priv = drm_to_priv(pipe->crtc.dev);
> +	gpiod_set_value(priv->enable_gpio, 0);
> +}
> +
> +static int sharp_ls027b7dh01_clear_display(struct sharp_ls027b7dh01 *priv)
> +{
> +	u8 clear_buf[2] = { CMD_CLEAR, 0 };
> +
> +	return spi_write(priv->spi, clear_buf, sizeof(clear_buf));
> +}
> +
> +static int sharp_ls027b7dh01_pwm_enable(struct sharp_ls027b7dh01 *priv)
> +{
> +	struct device *dev = &priv->spi->dev;
> +	struct pwm_state pwmstate;
> +
> +	priv->extcomin_pwm = devm_pwm_get(dev, NULL);
> +	if (IS_ERR(priv->extcomin_pwm)) {
> +		dev_err(dev, "Could not get EXTCOMIN pwm\n");
> +		return PTR_ERR(priv->extcomin_pwm);
> +	}
> +
> +	pwm_init_state(priv->extcomin_pwm, &pwmstate);
> +	pwm_set_relative_duty_cycle(&pwmstate, 50, 100);
> +	pwm_apply_state(priv->extcomin_pwm, &pwmstate);
> +
> +	pwm_enable(priv->extcomin_pwm);
> +
> +	return 0;
> +}
> +
> +static void sharp_ls027b7dh01_pipe_enable(struct drm_simple_display_pipe *pipe,
> +					  struct drm_crtc_state *crtc_state,
> +					  struct drm_plane_state *plane_state)
> +{
> +	struct sharp_ls027b7dh01 *priv;
> +	int ret, drm_idx;
> +
> +	priv = drm_to_priv(pipe->crtc.dev);
> +
> +	if (!drm_dev_enter(pipe->crtc.dev, &drm_idx))
> +		return;
> +
> +	gpiod_set_value(priv->enable_gpio, 1);
> +
> +	ret = sharp_ls027b7dh01_clear_display(priv);
> +	if (ret)
> +		goto exit;
> +
> +	sharp_ls027b7dh01_pwm_enable(priv);
> +
> +exit:
> +	drm_dev_exit(drm_idx);
> +}
> +
> +static const struct drm_simple_display_pipe_funcs sharp_ls027b7dh01_pipe_funcs = {
> +	.enable = sharp_ls027b7dh01_pipe_enable,
> +	.disable = sharp_ls027b7dh01_pipe_disable,
> +	.update = sharp_ls027b7dh01_pipe_update,
> +};
> +
> +static int sharp_ls027b7dh01_connector_get_modes(struct drm_connector *connector)
> +{
> +	struct sharp_ls027b7dh01 *priv = drm_to_priv(connector->dev);
> +
> +	return drm_connector_helper_get_modes_fixed(connector, priv->display_mode);
> +}
> +
> +static const struct drm_connector_helper_funcs sharp_ls027b7dh01_connector_hfuncs = {
> +	.get_modes = sharp_ls027b7dh01_connector_get_modes,
> +};
> +
> +static const struct drm_connector_funcs sharp_ls027b7dh01_connector_funcs = {
> +	.reset = drm_atomic_helper_connector_reset,
> +	.fill_modes = drm_helper_probe_single_connector_modes,
> +	.destroy = drm_connector_cleanup,
> +	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +static const struct drm_mode_config_funcs sharp_ls027b7dh01_mode_config_funcs = {
> +	.fb_create = drm_gem_fb_create_with_dirty,
> +	.atomic_check = drm_atomic_helper_check,
> +	.atomic_commit = drm_atomic_helper_commit,
> +};
> +
> +static const uint32_t sharp_ls027b7dh01_formats[] = {
> +	DRM_FORMAT_XRGB8888,
> +};
> +
> +static const struct drm_display_mode sharp_ls027b7dh01_mode = {
> +	DRM_SIMPLE_MODE(400, 240, 59, 35),
> +};
> +
> +DEFINE_DRM_GEM_DMA_FOPS(sharp_ls027b7dh01_fops);
> +
> +static const struct drm_driver sharp_ls027b7dh01_drm_driver = {
> +	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
> +	.fops			= &sharp_ls027b7dh01_fops,
> +	DRM_GEM_DMA_DRIVER_OPS_VMAP,
> +	.name			= "sharp_ls027b7dh01",
> +	.desc			= "Sharp ls027b7dh01 Memory LCD",
> +	.date			= "20231129",
> +	.major			= 1,
> +	.minor			= 0,
> +};
> +
> +static int sharp_ls027b7dh01_probe(struct spi_device *spi)
> +{
> +	struct device *dev = &spi->dev;
> +	struct sharp_ls027b7dh01 *priv;
> +	struct drm_device *drm;
> +	unsigned int write_buf_size;
> +	int ret;
> +
> +	if (!dev->coherent_dma_mask) {
> +		ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
> +		if (ret)
> +			return dev_err_probe(dev, ret, "Failed to set dma mask\n");
> +	}
> +
> +	priv = devm_drm_dev_alloc(dev, &sharp_ls027b7dh01_drm_driver,
> +				  struct sharp_ls027b7dh01, drm);
> +	if (IS_ERR(priv))
> +		return PTR_ERR(priv);
> +
> +	spi_set_drvdata(spi, priv);
> +	priv->spi = spi;
> +
> +	priv->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH);
> +	if (IS_ERR(priv->enable_gpio))
> +		return dev_err_probe(dev, PTR_ERR(priv->enable_gpio),
> +				     "Failed to get GPIO 'enable'\n");
> +
> +	drm = &priv->drm;
> +	ret = drmm_mode_config_init(drm);
> +	if (ret)
> +		return ret;
> +
> +	drm->mode_config.funcs = &sharp_ls027b7dh01_mode_config_funcs;
> +	priv->display_mode = &sharp_ls027b7dh01_mode;
> +
> +	/*
> +	 * write_buf_size:
> +	 *
> +	 * hdisplay * vdisplay / 8 => 1 bit per Pixel.
> +	 * 2 * vdisplay => line number byte + trailer dummy byte for every line.
> +	 * 2 => write command byte + final trailer dummy byte.
> +	 */
> +	write_buf_size = priv->display_mode->hdisplay * priv->display_mode->vdisplay / 8
> +			 + 2 * priv->display_mode->vdisplay + 2;
> +
> +	priv->write_buf = devm_kzalloc(dev, write_buf_size, GFP_KERNEL);
> +	if (!priv->write_buf)
> +		return -ENOMEM;
> +
> +	drm->mode_config.min_width = priv->display_mode->hdisplay;
> +	drm->mode_config.max_width = priv->display_mode->hdisplay;
> +	drm->mode_config.min_height = priv->display_mode->vdisplay;
> +	drm->mode_config.max_height = priv->display_mode->vdisplay;
> +
> +	ret = drm_connector_init(drm, &priv->connector,
> +				 &sharp_ls027b7dh01_connector_funcs,
> +				 DRM_MODE_CONNECTOR_SPI);
> +	if (ret)
> +		return ret;
> +
> +	drm_connector_helper_add(&priv->connector,
> +				 &sharp_ls027b7dh01_connector_hfuncs);
> +
> +	ret = drm_simple_display_pipe_init(drm, &priv->pipe,
> +					   &sharp_ls027b7dh01_pipe_funcs,
> +					   sharp_ls027b7dh01_formats,
> +					   ARRAY_SIZE(sharp_ls027b7dh01_formats),
> +					   NULL, &priv->connector);
> +	if (ret)
> +		return ret;
> +
> +	drm_plane_enable_fb_damage_clips(&priv->pipe.plane);
> +	drm_mode_config_reset(drm);
> +
> +	ret = drm_dev_register(drm, 0);
> +	if (ret)
> +		return ret;
> +
> +	drm_fbdev_generic_setup(drm, 0);
> +
> +	return 0;
> +}
> +
> +static void sharp_ls027b7dh01_remove(struct spi_device *spi)
> +{
> +	struct sharp_ls027b7dh01 *priv = spi_get_drvdata(spi);
> +
> +	drm_dev_unplug(&priv->drm);
> +	drm_atomic_helper_shutdown(&priv->drm);
> +}
> +
> +static void sharp_ls027b7dh01_shutdown(struct spi_device *spi)
> +{
> +	struct sharp_ls027b7dh01 *priv = spi_get_drvdata(spi);
> +
> +	drm_atomic_helper_shutdown(&priv->drm);
> +}
> +
> +static const struct spi_device_id sharp_ls027b7dh01_ids[] = {
> +	{ "ls027b7dh01" },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(spi, sharp_ls027b7dh01_ids);
> +
> +static const struct of_device_id sharp_ls027b7dh01_of_match[] = {
> +	{ .compatible = "sharp,ls027b7dh01", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, sharp_ls027b7dh01_of_match);
> +
> +static struct spi_driver sharp_ls027b7dh01_spi_driver = {
> +	.probe = sharp_ls027b7dh01_probe,
> +	.remove = sharp_ls027b7dh01_remove,
> +	.shutdown = sharp_ls027b7dh01_shutdown,
> +	.id_table = sharp_ls027b7dh01_ids,
> +	.driver = {
> +		.name = "sharp-ls027b7dh01",
> +		.of_match_table = sharp_ls027b7dh01_of_match,
> +	},
> +};
> +module_spi_driver(sharp_ls027b7dh01_spi_driver);
> +
> +MODULE_AUTHOR("Andrew D'Angelo");
> +MODULE_AUTHOR("Mehdi Djait <mehdi.djait@...tlin.com>");
> +MODULE_DESCRIPTION("Sharp LS027B7DH01 Driver");
> +MODULE_LICENSE("GPL");

-- 
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstrasse 146, 90461 Nuernberg, Germany
GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman
HRB 36809 (AG Nuernberg)

Download attachment "OpenPGP_signature.asc" of type "application/pgp-signature" (841 bytes)

Powered by blists - more mailing lists