[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230717-topic-branch_aon_cleanup-v2-5-2a583460ef26@linaro.org>
Date: Wed, 29 Nov 2023 19:59:24 +0100
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Bjorn Andersson <andersson@...nel.org>,
Andy Gross <agross@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: Marijn Suijten <marijn.suijten@...ainline.org>,
linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
Konrad Dybcio <konrad.dybcio@...aro.org>
Subject: [PATCH v2 05/15] clk: qcom: gpucc-sm6375: Unregister critical
clocks
Some clocks need to be always-on, but we don't really do anything
with them, other than calling enable() once and telling Linux they're
enabled.
Unregister them to save a couple of bytes and, perhaps more
importantly, allow for runtime suspend of the clock controller device,
as CLK_IS_CRITICAL prevents the latter.
Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
drivers/clk/qcom/gpucc-sm6375.c | 33 +++------------------------------
1 file changed, 3 insertions(+), 30 deletions(-)
diff --git a/drivers/clk/qcom/gpucc-sm6375.c b/drivers/clk/qcom/gpucc-sm6375.c
index da24276a018e..6d85936dd441 100644
--- a/drivers/clk/qcom/gpucc-sm6375.c
+++ b/drivers/clk/qcom/gpucc-sm6375.c
@@ -183,20 +183,6 @@ static struct clk_rcg2 gpucc_gx_gfx3d_clk_src = {
},
};
-static struct clk_branch gpucc_ahb_clk = {
- .halt_reg = 0x1078,
- .halt_check = BRANCH_HALT_DELAY,
- .clkr = {
- .enable_reg = 0x1078,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gpucc_ahb_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gpucc_cx_gfx3d_clk = {
.halt_reg = 0x10a4,
.halt_check = BRANCH_HALT_DELAY,
@@ -294,20 +280,6 @@ static struct clk_branch gpucc_cxo_clk = {
},
};
-static struct clk_branch gpucc_gx_cxo_clk = {
- .halt_reg = 0x1060,
- .halt_check = BRANCH_HALT_DELAY,
- .clkr = {
- .enable_reg = 0x1060,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gpucc_gx_cxo_clk",
- .flags = CLK_IS_CRITICAL,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gpucc_gx_gfx3d_clk = {
.halt_reg = 0x1054,
.halt_check = BRANCH_HALT_DELAY,
@@ -381,7 +353,6 @@ static struct gdsc gpu_gx_gdsc = {
};
static struct clk_regmap *gpucc_sm6375_clocks[] = {
- [GPU_CC_AHB_CLK] = &gpucc_ahb_clk.clkr,
[GPU_CC_CX_GFX3D_CLK] = &gpucc_cx_gfx3d_clk.clkr,
[GPU_CC_CX_GFX3D_SLV_CLK] = &gpucc_cx_gfx3d_slv_clk.clkr,
[GPU_CC_CX_GMU_CLK] = &gpucc_cx_gmu_clk.clkr,
@@ -389,7 +360,6 @@ static struct clk_regmap *gpucc_sm6375_clocks[] = {
[GPU_CC_CXO_AON_CLK] = &gpucc_cxo_aon_clk.clkr,
[GPU_CC_CXO_CLK] = &gpucc_cxo_clk.clkr,
[GPU_CC_GMU_CLK_SRC] = &gpucc_gmu_clk_src.clkr,
- [GPU_CC_GX_CXO_CLK] = &gpucc_gx_cxo_clk.clkr,
[GPU_CC_GX_GFX3D_CLK] = &gpucc_gx_gfx3d_clk.clkr,
[GPU_CC_GX_GFX3D_CLK_SRC] = &gpucc_gx_gfx3d_clk_src.clkr,
[GPU_CC_GX_GMU_CLK] = &gpucc_gx_gmu_clk.clkr,
@@ -455,6 +425,9 @@ static int gpucc_sm6375_probe(struct platform_device *pdev)
clk_lucid_pll_configure(&gpucc_pll0, regmap, &gpucc_pll0_config);
clk_lucid_pll_configure(&gpucc_pll1, regmap, &gpucc_pll1_config);
+ qcom_branch_set_clk_en(regmap, 0x1078); /* GPUCC_AHB_CLK */
+ qcom_branch_set_clk_en(regmap, 0x1060); /* GPUCC_GX_CXO_CLK */
+
ret = qcom_cc_really_probe(pdev, &gpucc_sm6375_desc, regmap);
pm_runtime_put(&pdev->dev);
--
2.43.0
Powered by blists - more mailing lists