[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230717-topic-branch_aon_cleanup-v2-9-2a583460ef26@linaro.org>
Date: Wed, 29 Nov 2023 19:59:28 +0100
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Bjorn Andersson <andersson@...nel.org>,
Andy Gross <agross@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: Marijn Suijten <marijn.suijten@...ainline.org>,
linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
Konrad Dybcio <konrad.dybcio@...aro.org>
Subject: [PATCH v2 09/15] clk: qcom: gcc-sm6115: Add runtime PM
The GCC block on SM6115 is powered by the VDD_CX rail. We need to ensure
that CX is enabled to prevent unwanted power collapse and that the
reference is dropped when unused so that the system can enter a
firmware-managed lower power state.
Enable runtime PM to keep the power flowing only when necessary.
Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
drivers/clk/qcom/gcc-sm6115.c | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/qcom/gcc-sm6115.c b/drivers/clk/qcom/gcc-sm6115.c
index 87a2bfe222a3..3e0a3fd09718 100644
--- a/drivers/clk/qcom/gcc-sm6115.c
+++ b/drivers/clk/qcom/gcc-sm6115.c
@@ -9,6 +9,7 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/clk-provider.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/reset-controller.h>
@@ -3384,14 +3385,26 @@ static int gcc_sm6115_probe(struct platform_device *pdev)
struct regmap *regmap;
int ret;
+ ret = devm_pm_runtime_enable(&pdev->dev);
+ if (ret)
+ return ret;
+
+ ret = pm_runtime_resume_and_get(&pdev->dev);
+ if (ret)
+ return ret;
+
regmap = qcom_cc_map(pdev, &gcc_sm6115_desc);
- if (IS_ERR(regmap))
+ if (IS_ERR(regmap)) {
+ pm_runtime_put(&pdev->dev);
return PTR_ERR(regmap);
+ }
ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks,
ARRAY_SIZE(gcc_dfs_clocks));
- if (ret)
+ if (ret) {
+ pm_runtime_put(&pdev->dev);
return ret;
+ }
clk_alpha_pll_configure(&gpll8, regmap, &gpll8_config);
clk_alpha_pll_configure(&gpll9, regmap, &gpll9_config);
@@ -3406,7 +3419,10 @@ static int gcc_sm6115_probe(struct platform_device *pdev)
qcom_branch_set_clk_en(regmap, 0x36004); /* GCC_GPU_CFG_AHB_CLK */
qcom_branch_set_clk_en(regmap, 0x2b06c); /* GCC_SYS_NOC_CPUSS_AHB_CLK */
- return qcom_cc_really_probe(pdev, &gcc_sm6115_desc, regmap);
+ ret = qcom_cc_really_probe(pdev, &gcc_sm6115_desc, regmap);
+ pm_runtime_put(&pdev->dev);
+
+ return ret;
}
static struct platform_driver gcc_sm6115_driver = {
--
2.43.0
Powered by blists - more mailing lists