linux-kernel - Re: [PATCH v1] PCI: Add PCIE_CONFIG_REQUEST_WAIT

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231129232219.GA444277@bhelgaas>
Date:   Wed, 29 Nov 2023 17:22:19 -0600
From:   Bjorn Helgaas <helgaas@...nel.org>
To:     Kevin Xie <kevin.xie@...rfivetech.com>
Cc:     Bjorn Helgaas <bhelgaas@...gle.com>, linux-pci@...r.kernel.org,
        linux-kernel@...r.kernel.org, mason.huo@...rfivetech.com,
        leyfoon.tan@...rfivetech.com, minda.chen@...rfivetech.com
Subject: Re: [PATCH v1] PCI: Add PCIE_CONFIG_REQUEST_WAIT_MS waiting time
 value

On Fri, Nov 24, 2023 at 09:45:08AM +0800, Kevin Xie wrote:
> Add the PCIE_CONFIG_REQUEST_WAIT_MS marco to define the minimum waiting
> time between sending the first configuration request to the device and
> exit from a conventional reset (or after link training completes).
> 
> As described in the conventional reset rules of PCI specifications,
> there are two different use cases of the value:
> 
>    - With a downstream port that supports link speeds <= 5.0 GT/s,
>      the waiting is following exit from a conventional reset.
> 
>    - With a downstream port that supports link speeds > 5.0 GT/s,
>      the waiting is after link training completes.
> 
> Signed-off-by: Kevin Xie <kevin.xie@...rfivetech.com>
> Reviewed-by: Mason Huo <mason.huo@...rfivetech.com>
> ---
>  drivers/pci/pci.h | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index 5ecbcf041179..4ca8766e546e 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -22,6 +22,13 @@
>   */
>  #define PCIE_PME_TO_L2_TIMEOUT_US	10000
>  
> +/*
> + * PCIe r6.0, sec 6.6.1, <Conventional Reset>
> + * Requires a minimum waiting of 100ms before sending a configuration
> + * request to the device.
> + */
> +#define PCIE_CONFIG_REQUEST_WAIT_MS	100

Oh, and I think this name should include something about "reset"
because that's the common scenario and that's the spec section where
the value is mentioned.