[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231130161657.556483-1-frieder@fris.de>
Date: Thu, 30 Nov 2023 17:16:00 +0100
From: Frieder Schrempf <frieder@...s.de>
To: Conor Dooley <conor+dt@...nel.org>, devicetree@...r.kernel.org,
Frieder Schrempf <frieder.schrempf@...tron.de>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>
Cc: Alexander Stein <alexander.stein@...tq-group.com>,
Fabio Estevam <festevam@...il.com>,
Gregor Herburger <gregor.herburger@...tq-group.com>,
Krzysztof Kozlowski <krzk@...nel.org>,
Marcel Ziswiler <marcel.ziswiler@...adex.com>,
Marek Vasut <marex@...x.de>,
NXP Linux Team <linux-imx@....com>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Philippe Schenker <philippe.schenker@...adex.com>,
Tim Harvey <tharvey@...eworks.com>
Subject: [PATCH v2 00/14] arm64: dts: imx8mm-kontron: DT updates
From: Frieder Schrempf <frieder.schrempf@...tron.de>
This patchset contains several improvements and updates for the devicetrees
for the i.MX8MM modules and boards by Kontron Electronics GmbH.
* HDMI/LVDS support for the BL/DL i.MX8MM
* Misc cleanups and small fixes
* OSM-S i.MX8MM module refactoring and update to latest HW revision
Changes in v2:
* Rework DSI mux GPIO logic to be compatible with overlay
* Switch from 4 to 2 DSI lanes for LVDS bridge to fix non-working display
Frieder Schrempf (14):
arm64: dts: imx8mm-kontron: Add support for display bridges on BL
i.MX8MM
arm64: dts: imx8mm-kontron: Add DL (Display-Line) overlay with LVDS
support
arm64: dts: imx8mm-kontron: Disable pullups for I2C signals on OSM-S
i.MX8MM
arm64: dts: imx8mm-kontron: Disable pullups for I2C signals on SL/BL
i.MX8MM
arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals
on BL OSM-S board
arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals
on BL board
arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals
on BL OSM-S board
arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals
on BL board
arm64: dts: imx8mm-kontron: Fix interrupt for RTC on OSM-S i.MX8MM
module
arm64: dts: imx8mm-kontron: Fix OSM-S devicetrees to match latest
hardware
arm64: dts: imx8mm-kontron: Disable uneffective PUE bit in SDIO IOMUX
arm64: dts: imx8mm-kontron: Remove useless trickle-diode-disable from
RTC node
arm64: dts: imx8mm-kontron: Add I2C EEPROM on OSM-S Kontron i.MX8MM
arm64: dts: imx8mm-kontron: Refactor devicetree for OSM-S module and
board
arch/arm64/boot/dts/freescale/Makefile | 4 +
.../dts/freescale/imx8mm-kontron-bl-osm-s.dts | 295 +++------
.../boot/dts/freescale/imx8mm-kontron-bl.dts | 196 +++++-
.../boot/dts/freescale/imx8mm-kontron-dl.dtso | 200 ++++++
.../dts/freescale/imx8mm-kontron-osm-s.dtsi | 567 +++++++++++++++++-
.../boot/dts/freescale/imx8mm-kontron-sl.dtsi | 4 +-
6 files changed, 1032 insertions(+), 234 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
--
2.43.0
Powered by blists - more mailing lists