| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZWjOBw0Ygyw226Cc@dell>
Date: Thu, 30 Nov 2023 18:02:42 +0000
From: Fam Zheng <fam@...hon.net>
To: Tony Luck <tony.luck@...el.com>
Cc: Fenghua Yu <fenghua.yu@...el.com>,
Reinette Chatre <reinette.chatre@...el.com>,
Peter Newman <peternewman@...gle.com>,
Jonathan Corbet <corbet@....net>,
Shuah Khan <skhan@...uxfoundation.org>, x86@...nel.org,
Shaopeng Tan <tan.shaopeng@...itsu.com>,
James Morse <james.morse@....com>,
Jamie Iles <quic_jiles@...cinc.com>,
Babu Moger <babu.moger@....com>,
Randy Dunlap <rdunlap@...radead.org>,
linux-kernel@...r.kernel.org, linux-doc@...r.kernel.org,
patches@...ts.linux.dev, Shaopeng Tan <tan.shaopeng@...fujitsu.com>
Subject: Re: [PATCH v12 7/8] x86/resctrl: Sub NUMA Cluster detection and
enable
Hi Tony,
On Wed, Nov 29, 2023 at 04:34:17PM -0800, Tony Luck wrote:
> There isn't a simple hardware bit that indicates whether a CPU is
> running in Sub NUMA Cluster (SNC) mode. Infer the state by comparing
> the ratio of NUMA nodes to L3 cache instances.
>
> When SNC mode is detected, reconfigure the RMID counters by updating
> the MSR_RMID_SNC_CONFIG MSR on each socket as CPUs are seen.
>
> Clearing bit zero of the MSR divides the RMIDs and renumbers the ones
> on the second SNC node to start from zero.
>
> Signed-off-by: Tony Luck <tony.luck@...el.com>
> Reviewed-by: Peter Newman <peternewman@...gle.com>
> Reviewed-by: Reinette Chatre <reinette.chatre@...el.com>
> Reviewed-by: Shaopeng Tan <tan.shaopeng@...fujitsu.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@...fujitsu.com>
> ---
> arch/x86/include/asm/msr-index.h | 1 +
> arch/x86/kernel/cpu/resctrl/core.c | 96 ++++++++++++++++++++++++++++++
> 2 files changed, 97 insertions(+)
>
> diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
> index 1d51e1850ed0..94d29d81e6db 100644
> --- a/arch/x86/include/asm/msr-index.h
> +++ b/arch/x86/include/asm/msr-index.h
> @@ -1111,6 +1111,7 @@
> #define MSR_IA32_QM_CTR 0xc8e
> #define MSR_IA32_PQR_ASSOC 0xc8f
> #define MSR_IA32_L3_CBM_BASE 0xc90
> +#define MSR_RMID_SNC_CONFIG 0xca0
> #define MSR_IA32_L2_CBM_BASE 0xd10
> #define MSR_IA32_MBA_THRTL_BASE 0xd50
>
> diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
> index cf5aba8a74bf..3293ab4c58b0 100644
> --- a/arch/x86/kernel/cpu/resctrl/core.c
> +++ b/arch/x86/kernel/cpu/resctrl/core.c
> @@ -16,11 +16,14 @@
>
> #define pr_fmt(fmt) "resctrl: " fmt
>
> +#include <linux/cpu.h>
> #include <linux/slab.h>
> #include <linux/err.h>
> #include <linux/cacheinfo.h>
> #include <linux/cpuhotplug.h>
> +#include <linux/mod_devicetable.h>
>
> +#include <asm/cpu_device_id.h>
> #include <asm/intel-family.h>
> #include <asm/resctrl.h>
> #include "internal.h"
> @@ -740,11 +743,42 @@ static void clear_closid_rmid(int cpu)
> wrmsr(MSR_IA32_PQR_ASSOC, 0, 0);
> }
>
> +/*
> + * The power-on reset value of MSR_RMID_SNC_CONFIG is 0x1
> + * which indicates that RMIDs are configured in legacy mode.
> + * This mode is incompatible with Linux resctrl semantics
> + * as RMIDs are partitioned between SNC nodes, which requires
> + * a user to know which RMID is allocated to a task.
> + * Clearing bit 0 reconfigures the RMID counters for use
> + * in Sub NUMA Cluster mode. This mode is better for Linux.
> + * The RMID space is divided between all SNC nodes with the
> + * RMIDs renumbered to start from zero in each node when
> + * couning operations from tasks. Code to read the counters
> + * must adjust RMID counter numbers based on SNC node. See
> + * __rmid_read() for code that does this.
> + */
> +static void snc_remap_rmids(int cpu)
> +{
> + u64 val;
> +
> + /* Only need to enable once per package. */
> + if (cpumask_first(topology_core_cpumask(cpu)) != cpu)
> + return;
> +
> + rdmsrl(MSR_RMID_SNC_CONFIG, val);
> + val &= ~BIT_ULL(0);
> + wrmsrl(MSR_RMID_SNC_CONFIG, val);
> +}
> +
> static int resctrl_online_cpu(unsigned int cpu)
> {
> struct rdt_resource *r;
>
> mutex_lock(&rdtgroup_mutex);
> +
> + if (snc_nodes_per_l3_cache > 1)
> + snc_remap_rmids(cpu);
> +
> for_each_capable_rdt_resource(r)
> domain_add_cpu(cpu, r);
> /* The cpu is set in default rdtgroup after online. */
> @@ -999,11 +1033,73 @@ static __init bool get_rdt_resources(void)
> return (rdt_mon_capable || rdt_alloc_capable);
> }
>
> +/* CPU models that support MSR_RMID_SNC_CONFIG */
> +static const struct x86_cpu_id snc_cpu_ids[] __initconst = {
> + X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X, 0),
> + X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X, 0),
> + X86_MATCH_INTEL_FAM6_MODEL(EMERALDRAPIDS_X, 0),
> + X86_MATCH_INTEL_FAM6_MODEL(GRANITERAPIDS_X, 0),
> + {}
> +};
> +
> +/*
> + * There isn't a simple hardware bit that indicates whether a CPU is running
> + * in Sub NUMA Cluster (SNC) mode. Infer the state by comparing the
> + * ratio of NUMA nodes to L3 cache instances.
> + * It is not possible to accurately determine SNC state if the system is
> + * booted with a maxcpus=N parameter. That distorts the ratio of SNC nodes
> + * to L3 caches. It will be OK if system is booted with hyperthreading
> + * disabled (since this doesn't affect the ratio).
> + */
> +static __init int snc_get_config(void)
> +{
> + unsigned long *node_caches;
> + int mem_only_nodes = 0;
> + int cpu, node, ret;
> + int num_l3_caches;
> +
> + if (!x86_match_cpu(snc_cpu_ids))
> + return 1;
> +
> + node_caches = bitmap_zalloc(nr_node_ids, GFP_KERNEL);
> + if (!node_caches)
> + return 1;
> +
> + cpus_read_lock();
> +
> + if (num_online_cpus() != num_present_cpus())
> + pr_warn("Some CPUs offline, SNC detection may be incorrect\n");
> +
> + for_each_node(node) {
> + cpu = cpumask_first(cpumask_of_node(node));
> + if (cpu < nr_cpu_ids)
> + set_bit(get_cpu_cacheinfo_id(cpu, 3), node_caches);
Are we sure get_cpu_cacheinfo_id() is an valid index here? Looking at
the function it could be -1 or larger than nr_node_ids.
Fam
> + else
> + mem_only_nodes++;
> + }
> + cpus_read_unlock();
> +
> + num_l3_caches = bitmap_weight(node_caches, nr_node_ids);
> + kfree(node_caches);
> +
> + if (!num_l3_caches)
> + return 1;
> +
> + ret = (nr_node_ids - mem_only_nodes) / num_l3_caches;
> +
> + if (ret > 1)
> + rdt_resources_all[RDT_RESOURCE_L3].r_resctrl.mon_scope = RESCTRL_NODE;
> +
> + return ret;
> +}
> +
> static __init void rdt_init_res_defs_intel(void)
> {
> struct rdt_hw_resource *hw_res;
> struct rdt_resource *r;
>
> + snc_nodes_per_l3_cache = snc_get_config();
> +
> for_each_rdt_resource(r) {
> hw_res = resctrl_to_arch_res(r);
>
> --
> 2.41.
Powered by blists - more mailing lists