[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231130191815.2421978-1-robh@kernel.org>
Date: Thu, 30 Nov 2023 13:18:14 -0600
From: Rob Herring <robh@...nel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Tim Harvey <tharvey@...eworks.com>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] arm64: dts: imx8mm-venice: Fix PCI bus nodes
The imx8mm-venice boards PCI bus nodes are a complete mess. The
unit-addresses are wrong. The PCI bridge nodes are incomplete missing
"device_type" and "ranges" and just wrong for "#address-cells" and
"#size-cells" values.
All of these issues are reported warnings if anyone bothered to pay
attention. Sigh.
The kernel may have happened to work because it only looks at "reg"
to assign the DT nodes to PCI devices. Based on that, I'm assuming "reg"
is correctly matching the devices present, and the unit-addresses are
wrong. Presumably the bootloader fills in "local-mac-address" with
something valid. Hopefully it too uses "reg" rather than the path.
Fixes: afb424b99e0f ("arm64: dts: imx8mm-venice*: add PCIe support")
Signed-off-by: Rob Herring <robh@...nel.org>
---
.../dts/freescale/imx8mm-venice-gw72xx.dtsi | 28 +++++++++++--------
.../dts/freescale/imx8mm-venice-gw73xx.dtsi | 28 +++++++++++--------
.../dts/freescale/imx8mm-venice-gw7902.dts | 12 ++++----
3 files changed, 38 insertions(+), 30 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
index 3a0a10e835a2..ff461b004dc5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
@@ -150,25 +150,29 @@ &pcie0 {
<&clk IMX8MM_SYS_PLL2_250M>;
status = "okay";
- pcie@0,0 {
+ pcie@0 {
+ device_type = "pci";
reg = <0x0000 0 0 0 0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
- pcie@1,0 {
+ pcie@0 {
+ device_type = "pci";
reg = <0x0000 0 0 0 0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
- pcie@2,3 {
+ pcie@3 {
+ device_type = "pci";
reg = <0x1800 0 0 0 0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
- eth1: pcie@5,0 {
+ eth1: ethernet@0 {
reg = <0x0000 0 0 0 0>;
- #address-cells = <1>;
- #size-cells = <0>;
local-mac-address = [00 00 00 00 00 00];
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
index d79fe9f62b95..6f5a6d91c95e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
@@ -177,25 +177,29 @@ &pcie0 {
<&clk IMX8MM_SYS_PLL2_250M>;
status = "okay";
- pcie@0,0 {
+ pcie@0 {
+ device_type = "pci";
reg = <0x0000 0 0 0 0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
- pcie@1,0 {
+ pcie@0 {
+ device_type = "pci";
reg = <0x0000 0 0 0 0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
- pcie@2,4 {
+ pcie@4 {
+ device_type = "pci";
reg = <0x2000 0 0 0 0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
- eth1: pcie@6,0 {
+ eth1: ethernet@0 {
reg = <0x0000 0 0 0 0>;
- #address-cells = <1>;
- #size-cells = <0>;
local-mac-address = [00 00 00 00 00 00];
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
index 06a394a41d7c..4bb22fdc5d2e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
@@ -633,15 +633,15 @@ &pcie0 {
<&clk IMX8MM_SYS_PLL2_250M>;
status = "okay";
- pcie@0,0 {
+ pcie@0 {
+ device_type = "pci";
reg = <0x0000 0 0 0 0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
- eth1: pcie@1,0 {
+ eth1: ethernet@0 {
reg = <0x0000 0 0 0 0>;
- #address-cells = <1>;
- #size-cells = <0>;
local-mac-address = [00 00 00 00 00 00];
};
--
2.42.0
Powered by blists - more mailing lists