Message-ID: <20231130231802.GA498017@bhelgaas>
Date:   Thu, 30 Nov 2023 17:18:02 -0600
From:   Bjorn Helgaas <helgaas@...nel.org>
To:     Fiona Ebner <f.ebner@...xmox.com>
Cc:     linux-pci@...r.kernel.org, linux-acpi@...r.kernel.org,
        Igor Mammedov <imammedo@...hat.com>,
        linux-kernel@...r.kernel.org, bhelgaas@...gle.com, lenb@...nel.org,
        rafael@...nel.org, Thomas Lamprecht <t.lamprecht@...xmox.com>
Subject: Re: SCSI hotplug issues with UEFI VM with guest kernel >= 6.5

On Wed, Nov 29, 2023 at 04:22:41PM +0100, Fiona Ebner wrote:
> Hi,
> it seems that hot-plugging SCSI disks for QEMU virtual machines booting
> with UEFI and with guest kernels >= 6.5 might be broken. It's not
> consistently broken, hinting there might be a race somewhere.
> 
> Reverting the following two commits seems to make it work reliably again:
> 
> cc22522fd55e2 ("PCI: acpiphp: Use
> pci_assign_unassigned_bridge_resources() only for non-root bus")
> 40613da52b13f ("PCI: acpiphp: Reassign resources on bridge if necessary"
> 
> Of course, they might only expose some pre-existing issue, but this is
> my best lead. See below for some logs and details about an affected
> virtual machine. Happy to provide more information and to debug/test
> further.

Shoot.  Thanks very much for the report and your debugging.  I'm
hoping Igor will chime in with some ideas.

Both of those commits appeard in v6.5 and fixed legit issues, so I
hate to revert them, but this does appear to be a regression.

#regzbot introduced: cc22522fd55e2 ^
#regzbot introduced: 40613da52b13f ^

> Host kernel: 6.5.11-4-pve which is based on the one from Ubuntu
> Guest kernel: 6.7.0-rc3 and 6.7.0-rc3 with above commits reverted
> QEMU version: v8.1.0 built from source
> EDK2 version: submodule in the QEMU v8.1 repository: edk2-stable202302
> 
> QEMU command line:
> 
> > ./qemu-system-x86_64 \
> >   -accel 'kvm' \
> >   -chardev 'socket,id=qmp,path=/var/run/qemu-server/104.qmp,server=on,wait=off' \
> >   -mon 'chardev=qmp,mode=control' \
> >   -chardev 'socket,id=qmp-event,path=/var/run/qmeventd.sock,reconnect=5' \
> >   -mon 'chardev=qmp-event,mode=control' \
> >   -pidfile /var/run/qemu-server/104.pid \
> >   -drive 'if=pflash,unit=0,format=raw,readonly=on,file=./pc-bios/edk2-x86_64-code.fd' \
> >   -drive 'if=pflash,unit=1,id=drive-efidisk0,format=raw,file=/dev/u2nvme/vm-104-disk-0,size=540672' \
> >   -smp '4,sockets=1,cores=4,maxcpus=4' \
> >   -nodefaults \
> >   -vnc 'unix:/var/run/qemu-server/104.vnc,password=on' \
> >   -m 4096 \
> >   -device 'pci-bridge,id=pci.1,chassis_nr=1,bus=pci.0,addr=0x1e' \
> >   -device 'pci-bridge,id=pci.2,chassis_nr=2,bus=pci.0,addr=0x1f' \
> >   -device 'pci-bridge,id=pci.3,chassis_nr=3,bus=pci.0,addr=0x5' \
> >   -device 'VGA,id=vga,bus=pci.0,addr=0x2' \
> >   -device 'virtio-scsi-pci,id=virtioscsi0,bus=pci.3,addr=0x1' \
> >   -drive 'file=/dev/u2nvme/vm-104-disk-1,if=none,id=drive-scsi0,format=raw' \
> >   -blockdev 'raw,file.driver=file,file.filename=/home/febner/plug.raw,node-name=drive-scsi1' \
> >   -device 'scsi-hd,bus=virtioscsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,bootindex=100' \
> >   -netdev 'type=tap,id=net0,ifname=tap104i0,script=/var/lib/qemu-server/pve-bridge,downscript=/var/lib/qemu-server/pve-bridgedown,vhost=on' \
> >   -device 'virtio-net-pci,mac=BC:24:11:89:6A:E6,netdev=net0,bus=pci.0,addr=0x12,id=net0,rx_queue_size=1024,tx_queue_size=256,bootindex=102' \
> >   -bios './pc-bios/edk2-x86_64-code.fd'
> 
> Script to issue hotplug command via QEMU monitor protocol (QMP):
> 
> > #!/bin/sh
> > 
> > ID=$1
> > CMD=$2
> > 
> > if [ -z "$ID" ]; then
> >     echo "need to specify ID";
> >     exit 1;
> > fi
> > 
> > if [ -z "$CMD" ]; then
> >     echo "need to specify command (plug or unplug)";
> >     exit 1;
> > fi
> > 
> > 
> > if [ "$CMD" = "plug" ]; then
> >     socat - /var/run/qemu-server/"$ID".qmp << END
> >     {"execute": "qmp_capabilities"}
> >     {"arguments":{"driver":"virtio-scsi-pci","bus":"pci.3","addr":"0x2","id":"virtioscsi1"},"execute":"device_add"}
> >     {"arguments":{"bus":"virtioscsi1.0","channel":"0","driver":"scsi-hd","id":"scsi1","drive":"drive-scsi1","scsi-id":"0","lun":"1"},"execute":"device_add"}
> > END
> > elif [ "$CMD" = "unplug" ]; then
> >     socat - /var/run/qemu-server/"$ID".qmp << END
> >     {"execute": "qmp_capabilities"}
> >     {"arguments":{"id":"scsi1"},"execute":"device_del"}
> >     {"arguments":{"id":"virtioscsi1"},"execute":"device_del"}
> > END
> > fi
> 
> I've also tired and added 10 second sleep between the two device_add
> commands just to be sure, but that didn't make a difference. (Our
> management stack does query via QMP and wait for the device to show up
> and is also affected, I was just too lazy to do that for the reproducer
> here).
> 
> I've attached some logs for guest using kernel 6.7.0-rc3 where hotplug
> works rarely and guest using kernel 6.7.0-rc3 with the previously
> mentioned commits reverted where hotplug works reliably:
> 
> 6.7.0-rc3:
> 
> > Nov 29 15:12:02 hotplug kernel: pci 0000:01:02.0: [1af4:1004] type 00 class 0x010000
> > Nov 29 15:12:02 hotplug kernel: pci 0000:01:02.0: reg 0x10: [io  0x0000-0x003f]
> > Nov 29 15:12:02 hotplug kernel: pci 0000:01:02.0: reg 0x14: [mem 0x00000000-0x00000fff]
> > Nov 29 15:12:02 hotplug kernel: pci 0000:01:02.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
> > Nov 29 15:12:02 hotplug kernel: pci 0000:01:02.0: BAR 4: assigned [mem 0xc000004000-0xc000007fff 64bit pref]
> > Nov 29 15:12:02 hotplug kernel: pci 0000:01:02.0: BAR 1: assigned [mem 0xc1401000-0xc1401fff]
> > Nov 29 15:12:02 hotplug kernel: pci 0000:01:02.0: BAR 0: assigned [io  0xe040-0xe07f]
> > Nov 29 15:12:02 hotplug kernel: pci 0000:00:05.0: PCI bridge to [bus 01]
> > Nov 29 15:12:02 hotplug kernel: pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
> > Nov 29 15:12:02 hotplug kernel: pci 0000:00:05.0:   bridge window [mem 0xc1400000-0xc15fffff]
> > Nov 29 15:12:02 hotplug kernel: pci 0000:00:05.0:   bridge window [mem 0xc000000000-0xc01fffffff 64bit pref]
> > Nov 29 15:12:02 hotplug kernel: virtio-pci 0000:01:02.0: enabling device (0000 -> 0003)
> > Nov 29 15:12:02 hotplug kernel: ACPI: \_SB_.LNKC: Enabled at IRQ 11
> > Nov 29 15:12:02 hotplug kernel: scsi host3: Virtio SCSI HBA
> > Nov 29 15:12:02 hotplug kernel: pci 0000:00:05.0: PCI bridge to [bus 01]
> > Nov 29 15:12:02 hotplug kernel: pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
> > Nov 29 15:12:02 hotplug kernel: scsi 3:0:0:1: Direct-Access     QEMU     QEMU HARDDISK    2.5+ PQ: 0 ANSI: 5
> > Nov 29 15:12:02 hotplug kernel: pci 0000:00:05.0:   bridge window [mem 0xc1400000-0xc15fffff]
> > Nov 29 15:12:02 hotplug kernel: pci 0000:00:05.0:   bridge window [mem 0xc000000000-0xc01fffffff 64bit pref] 
> 
> Reboot
> 
> > Nov 29 15:12:52 hotplug kernel: pci 0000:01:02.0: [1af4:1004] type 00 class 0x010000
> > Nov 29 15:12:52 hotplug kernel: pci 0000:01:02.0: reg 0x10: [io  0x0000-0x003f]
> > Nov 29 15:12:52 hotplug kernel: pci 0000:01:02.0: reg 0x14: [mem 0x00000000-0x00000fff]
> > Nov 29 15:12:52 hotplug kernel: pci 0000:01:02.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
> > Nov 29 15:12:52 hotplug kernel: pci 0000:01:02.0: BAR 4: assigned [mem 0xc000004000-0xc000007fff 64bit pref]
> > Nov 29 15:12:52 hotplug kernel: pci 0000:01:02.0: BAR 1: assigned [mem 0xc1401000-0xc1401fff]
> > Nov 29 15:12:52 hotplug kernel: pci 0000:01:02.0: BAR 0: assigned [io  0xe040-0xe07f]
> > Nov 29 15:12:52 hotplug kernel: pci 0000:00:05.0: PCI bridge to [bus 01]
> > Nov 29 15:12:52 hotplug kernel: pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
> > Nov 29 15:12:52 hotplug kernel: pci 0000:00:05.0:   bridge window [mem 0xc1400000-0xc15fffff]
> > Nov 29 15:12:52 hotplug kernel: pci 0000:00:05.0:   bridge window [mem 0xc000000000-0xc01fffffff 64bit pref]
> > Nov 29 15:12:52 hotplug kernel: virtio-pci 0000:01:02.0: enabling device (0000 -> 0003)
> > Nov 29 15:12:52 hotplug kernel: ACPI: \_SB_.LNKC: Enabled at IRQ 11
> > Nov 29 15:12:52 hotplug kernel: scsi host3: Virtio SCSI HBA
> > Nov 29 15:12:52 hotplug kernel: pci 0000:00:05.0: PCI bridge to [bus 01]
> > Nov 29 15:12:52 hotplug kernel: pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
> > Nov 29 15:12:52 hotplug kernel: pci 0000:00:05.0:   bridge window [mem 0xc1400000-0xc15fffff]
> > Nov 29 15:12:52 hotplug kernel: scsi 3:0:0:1: Direct-Access     QEMU     QEMU HARDDISK    2.5+ PQ: 0 ANSI: 5
> > Nov 29 15:12:52 hotplug kernel: pci 0000:00:05.0:   bridge window [mem 0xc000000000-0xc01fffffff 64bit pref]
> 
> RebootThe one time it did work. Note that the line with "QEMU HARDDISK"
> comes after all lines with "bridge window":
> 
> > Nov 29 15:13:51 hotplug kernel: pci 0000:01:02.0: [1af4:1004] type 00 class 0x010000
> > Nov 29 15:13:51 hotplug kernel: pci 0000:01:02.0: reg 0x10: [io  0x0000-0x003f]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:01:02.0: reg 0x14: [mem 0x00000000-0x00000fff]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:01:02.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:01:02.0: BAR 4: assigned [mem 0xc000004000-0xc000007fff 64bit pref]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:01:02.0: BAR 1: assigned [mem 0xc1401000-0xc1401fff]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:01:02.0: BAR 0: assigned [io  0xe040-0xe07f]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:00:05.0: PCI bridge to [bus 01]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:00:05.0:   bridge window [mem 0xc1400000-0xc15fffff]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:00:05.0:   bridge window [mem 0xc000000000-0xc01fffffff 64bit pref]
> > Nov 29 15:13:51 hotplug kernel: virtio-pci 0000:01:02.0: enabling device (0000 -> 0003)
> > Nov 29 15:13:51 hotplug kernel: ACPI: \_SB_.LNKC: Enabled at IRQ 11
> > Nov 29 15:13:51 hotplug kernel: scsi host3: Virtio SCSI HBA
> > Nov 29 15:13:51 hotplug kernel: pci 0000:00:05.0: PCI bridge to [bus 01]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:00:05.0:   bridge window [mem 0xc1400000-0xc15fffff]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:00:05.0:   bridge window [mem 0xc000000000-0xc01fffffff 64bit pref]
> > Nov 29 15:13:51 hotplug kernel: scsi 3:0:0:1: Direct-Access     QEMU     QEMU HARDDISK    2.5+ PQ: 0 ANSI: 5
> > Nov 29 15:13:51 hotplug kernel: sd 3:0:0:1: Attached scsi generic sg1 type 0
> > Nov 29 15:13:51 hotplug kernel: sd 3:0:0:1: Power-on or device reset occurred
> > Nov 29 15:13:51 hotplug kernel: sd 3:0:0:1: [sdb] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
> > Nov 29 15:13:51 hotplug kernel: sd 3:0:0:1: [sdb] Write Protect is off
> > Nov 29 15:13:51 hotplug kernel: sd 3:0:0:1: [sdb] Mode Sense: 63 00 00 08
> > Nov 29 15:13:51 hotplug kernel: sd 3:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > Nov 29 15:13:51 hotplug kernel: sd 3:0:0:1: [sdb] Attached SCSI disk
> > Nov 29 15:14:08 hotplug systemd[1]: systemd-fsckd.service: Deactivated successfully.
> 
> 6.7.0-rc3 with the following reverted:
> cc22522fd55e2 ("PCI: acpiphp: Use
> pci_assign_unassigned_bridge_resources() only for non-root bus")
> 40613da52b13f ("PCI: acpiphp: Reassign resources on bridge if necessary")
> 
> > Nov 29 15:15:37 hotplug kernel: pci 0000:01:02.0: [1af4:1004] type 00 class 0x010000
> > Nov 29 15:15:37 hotplug kernel: pci 0000:01:02.0: reg 0x10: [io  0x0000-0x003f]
> > Nov 29 15:15:37 hotplug kernel: pci 0000:01:02.0: reg 0x14: [mem 0x00000000-0x00000fff]
> > Nov 29 15:15:37 hotplug kernel: pci 0000:01:02.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
> > Nov 29 15:15:37 hotplug kernel: pci 0000:01:02.0: BAR 4: assigned [mem 0xc000004000-0xc000007fff 64bit pref]
> > Nov 29 15:15:37 hotplug kernel: pci 0000:01:02.0: BAR 1: assigned [mem 0xc1401000-0xc1401fff]
> > Nov 29 15:15:37 hotplug kernel: pci 0000:01:02.0: BAR 0: assigned [io  0xe040-0xe07f]
> > Nov 29 15:15:37 hotplug kernel: virtio-pci 0000:01:02.0: enabling device (0000 -> 0003)
> > Nov 29 15:15:37 hotplug kernel: ACPI: \_SB_.LNKC: Enabled at IRQ 11
> > Nov 29 15:15:37 hotplug kernel: scsi host3: Virtio SCSI HBA
> > Nov 29 15:15:37 hotplug kernel: scsi 3:0:0:1: Direct-Access     QEMU     QEMU HARDDISK    2.5+ PQ: 0 ANSI: 5
> > Nov 29 15:15:37 hotplug kernel: sd 3:0:0:1: Attached scsi generic sg1 type 0
> > Nov 29 15:15:37 hotplug kernel: sd 3:0:0:1: Power-on or device reset occurred
> > Nov 29 15:15:37 hotplug kernel: sd 3:0:0:1: [sdb] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
> > Nov 29 15:15:37 hotplug kernel: sd 3:0:0:1: [sdb] Write Protect is off
> > Nov 29 15:15:37 hotplug kernel: sd 3:0:0:1: [sdb] Mode Sense: 63 00 00 08
> > Nov 29 15:15:37 hotplug kernel: sd 3:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > Nov 29 15:15:37 hotplug kernel: sd 3:0:0:1: [sdb] Attached SCSI disk
> > Nov 29 15:15:38 hotplug systemd[1]: systemd-fsckd.service: Deactivated successfully.
> 

Powered by blists - more mailing lists