[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <22a49deb-001d-4fa2-83e1-0fe6c7fe2a2e@quicinc.com>
Date: Thu, 30 Nov 2023 15:49:03 +0800
From: Can Guo <quic_cang@...cinc.com>
To: Manivannan Sadhasivam <mani@...nel.org>
CC: <bvanassche@....org>, <adrian.hunter@...el.com>,
<cmd4@...lcomm.com>, <beanhuo@...ron.com>, <avri.altman@....com>,
<junwoo80.lee@...sung.com>, <martin.petersen@...cle.com>,
<linux-scsi@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
"James E.J. Bottomley" <jejb@...ux.ibm.com>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v6 06/10] scsi: ufs: ufs-qcom: Set initial PHY gear to max
HS gear for HW ver 4 and newer
On 11/30/2023 2:47 PM, Manivannan Sadhasivam wrote:
> On Wed, Nov 29, 2023 at 12:28:31AM -0800, Can Guo wrote:
>> Since HW ver 4, max HS gear can be get from UFS host controller's register,
>> use the max HS gear as the initial PHY gear instead of UFS_HS_G2, so that
>> we don't need to update the hard code for newer targets in future.
>>
>> Signed-off-by: Can Guo <quic_cang@...cinc.com>
>
> One comment below. With that addressed,
>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
>
>> ---
>> drivers/ufs/host/ufs-qcom.c | 21 +++++++++++++++------
>> 1 file changed, 15 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
>> index aca6199..30f4ca6 100644
>> --- a/drivers/ufs/host/ufs-qcom.c
>> +++ b/drivers/ufs/host/ufs-qcom.c
>> @@ -1060,6 +1060,20 @@ static void ufs_qcom_advertise_quirks(struct ufs_hba *hba)
>> hba->quirks |= UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH;
>> }
>>
>> +static void ufs_qcom_set_phy_gear(struct ufs_qcom_host *host)
>> +{
>> + struct ufs_host_params *host_params = &host->host_params;
>> +
>> + host->phy_gear = host_params->hs_tx_gear;
>> +
>> + /*
>> + * Power up the PHY using the minimum supported gear (UFS_HS_G2).
>> + * Switching to max gear will be performed during reinit if supported.
>
> As I mentioned in v5, you need to reword this comment to make it clear we are
> setting G2 only for platforms < v4. Something like below:
>
> "For controllers whose major version is < 4, power up the PHY using minimum
> supported gear (UFS_HS_G2). Switching to max gear will be performed during
> reinit if supported. For newer controllers (>= 4), PHY will be powered up using
> max supported gear."
Sorry that I missed this one, will add in next version.
Thanks,
Can Guo.
>
> - Mani
>
>> + */
>> + if (host->hw_ver.major < 0x4)
>> + host->phy_gear = UFS_HS_G2;
>> +}
>> +
>> static void ufs_qcom_set_host_params(struct ufs_hba *hba)
>> {
>> struct ufs_qcom_host *host = ufshcd_get_variant(hba);
>> @@ -1296,6 +1310,7 @@ static int ufs_qcom_init(struct ufs_hba *hba)
>> ufs_qcom_set_caps(hba);
>> ufs_qcom_advertise_quirks(hba);
>> ufs_qcom_set_host_params(hba);
>> + ufs_qcom_set_phy_gear(host);
>>
>> err = ufs_qcom_ice_init(host);
>> if (err)
>> @@ -1313,12 +1328,6 @@ static int ufs_qcom_init(struct ufs_hba *hba)
>> dev_warn(dev, "%s: failed to configure the testbus %d\n",
>> __func__, err);
>>
>> - /*
>> - * Power up the PHY using the minimum supported gear (UFS_HS_G2).
>> - * Switching to max gear will be performed during reinit if supported.
>> - */
>> - host->phy_gear = UFS_HS_G2;
>> -
>> return 0;
>>
>> out_variant_clear:
>> --
>> 2.7.4
>>
>>
>
Powered by blists - more mailing lists