| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1874751.tdWV9SEqCh@steina-w>
Date: Thu, 30 Nov 2023 16:34:11 +0100
From: Alexander Stein <alexander.stein@...tq-group.com>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: linux-media@...r.kernel.org, devicetree@...r.kernel.org,
Paul Elder <paul.elder@...asonboard.com>,
kieran.bingham@...asonboard.com, tomi.valkeinen@...asonboard.com,
umang.jain@...asonboard.com, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Tim Harvey <tharvey@...eworks.com>,
Philippe Schenker <philippe.schenker@...adex.com>,
Marek Vasut <marex@...x.de>,
Gregor Herburger <gregor.herburger@...tq-group.com>,
Marcel Ziswiler <marcel.ziswiler@...adex.com>,
open list <linux-kernel@...r.kernel.org>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 2/2] arm64: dts: imx8mp: Add overlays for ISP instances
Hi Laurent,
Am Donnerstag, 30. November 2023, 15:20:48 CET schrieb Laurent Pinchart:
> Hi Alexander,
>
> On Thu, Nov 30, 2023 at 10:51:22AM +0100, Alexander Stein wrote:
> > Am Mittwoch, 29. November 2023, 16:16:37 CET schrieb Laurent Pinchart:
> > > On Wed, Nov 29, 2023 at 11:20:07AM +0100, Alexander Stein wrote:
> > > > Am Mittwoch, 29. November 2023, 10:31:13 CET schrieb Paul Elder:
> > > > > From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
> > > > >
> > > > > Add two overlay to enable each ISP instance. The ISP is wired
> > > > > directly
> > > > > to the CSIS for now, bypassing the ISI completely.
> > > >
> > > > I'm not sure if this is worth adding in a separate overlay.
> > >
> > > The trouble is that, at this point, selection between the ISP and the
> > > ISI can only be performed through DT :-S That's why this is implemented
> > > as an overlay.
> >
> > I feel a better place would be the overlay which actually adds the sensor.
> > This knows best whether ISI or ISP should be used.
>
> Any sensor could be used with either the ISI or the ISP, so I don't
> think the camera module overlay would be the best place for this. Unless
> you want to duplicate all camera module overlays, with an ISI version
> and an ISP version :-)
True, that's a really good argument for having these small overlays.
But how to deal with dtc warnings?
> imx8mp-isp1.dtbo: Warning (graph_port): /fragment@2: graph port node name
should be 'port'
> imx8mp-isp1.dtso:34.17-36.3: Warning (graph_endpoint): /fragment@2/
__overlay__: graph endpoint node name should be 'endpoint'
> imx8mp-isp1.dtso:34.17-36.3: Warning (graph_endpoint): /fragment@2/
__overlay__: graph connection to node '/fragment@..._overlay__/ports/port@1/
endpoint' is not bidirectional
But for the small overlay itself:
Tested-by: Alexander Stein <alexander.stein@...tq-group.com>
> > > > > Signed-off-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
> > > > > Signed-off-by: Paul Elder <paul.elder@...asonboard.com>
> > > > > ---
> > > > >
> > > > > arch/arm64/boot/dts/freescale/Makefile | 2 ++
> > > > > .../arm64/boot/dts/freescale/imx8mp-isp1.dtso | 36
> > > > > +++++++++++++++++++
> > > > > .../arm64/boot/dts/freescale/imx8mp-isp2.dtso | 36
> > > > > +++++++++++++++++++
> > > > > 3 files changed, 74 insertions(+)
> > > > > create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-isp1.dtso
> > > > > create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-isp2.dtso
> > > > >
> > > > > diff --git a/arch/arm64/boot/dts/freescale/Makefile
> > > > > b/arch/arm64/boot/dts/freescale/Makefile index
> > > > > 300049037eb0..f97dfac11189
> > > > > 100644
> > > > > --- a/arch/arm64/boot/dts/freescale/Makefile
> > > > > +++ b/arch/arm64/boot/dts/freescale/Makefile
> > > > > @@ -113,6 +113,8 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
> > > > >
> > > > > dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb
> > > > > dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
> > > > > dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
> > > > >
> > > > > +dtb-$(CONFIG_ARCH_MXC) += imx8mp-isp1.dtbo
> > > > > +dtb-$(CONFIG_ARCH_MXC) += imx8mp-isp2.dtbo
> > > > >
> > > > > dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
> > > > > dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
> > > > > dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
> > > > >
> > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-isp1.dtso
> > > > > b/arch/arm64/boot/dts/freescale/imx8mp-isp1.dtso new file mode
> > > > > 100644
> > > > > index 000000000000..cf394ed224ab
> > > > > --- /dev/null
> > > > > +++ b/arch/arm64/boot/dts/freescale/imx8mp-isp1.dtso
> > > > > @@ -0,0 +1,36 @@
> > > > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > > > > +/*
> > > > > + * Copyright 2022 Ideas on Board Oy
> > > > > + */
> > > > > +
> > > > > +/dts-v1/;
> > > > > +/plugin/;
> > > > > +
> > > > > +#include <dt-bindings/media/video-interfaces.h>
> > > > > +
> > > > > +&isi_0 {
> > > > > + status = "disabled";
> > > >
> > > > ISI is disabled by default. What is your intention here?
> > >
> > > It could be enabled by an overlay for a camera module. Ideally we want
> > > to be able to enable both the ISI and ISP at runtime, but that's not
> > > possible yet and will require a very large amount of work.
> >
> > Again IMHO this is part of sensor setup, in a very specific overlay. To
> > put it into different words: I barely see the gain of this small overlay.
> >
> > Runtime switching would require a combined media controller including both
> > ISI and ISP, no?
>
> Correct, that's the hard part.
>
> > > > > +
> > > > > + ports {
> > > > > + port@0 {
> > > > > + /delete-node/ endpoint;
> > > >
> > > > This doesn't work in overlays. See [1]. Otherwise the OF graph
> > > > connections
> > > > look fine to me. I'm using the same in my local overlay.
> > >
> > > Interesting, I wasn't aware of that. Maybe we should fix it :-)
> > >
> > > > [1]
> > > > https://lore.kernel.org/all/CAMuHMdWu4KZbBkvEofUV2wuA1g2S=XHHM3RUN1cN
> > > > rcZBkhsPZA@...l.gmail.com/> > >
> > > > > + };
> > > > > + };
> > > > > +};
> > > > > +
> > > > > +&isp_0 {
> > > > > + status = "okay";
> > > > > +
> > > > > + ports {
> > > > > + port@1 {
> > > > > + isp0_in: endpoint {
> > > > > + bus-type =
<MEDIA_BUS_TYPE_PARALLEL>;
> > > > > + remote-endpoint =
<&mipi_csi_0_out>;
> > > > > + };
> > > > > + };
> > > > > + };
> > > > > +};
> > > > > +
> > > > > +&mipi_csi_0_out {
> > > > > + remote-endpoint = <&isp0_in>;
> > > > > +};
> > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-isp2.dtso
> > > > > b/arch/arm64/boot/dts/freescale/imx8mp-isp2.dtso new file mode
> > > > > 100644
> > > > > index 000000000000..14e2e7b2617f
> > > > > --- /dev/null
> > > > > +++ b/arch/arm64/boot/dts/freescale/imx8mp-isp2.dtso
> > > > > @@ -0,0 +1,36 @@
> > > > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > > > > +/*
> > > > > + * Copyright 2022 Ideas on Board Oy
> > > > > + */
> > > > > +
> > > > > +/dts-v1/;
> > > > > +/plugin/;
> > > > > +
> > > > > +#include <dt-bindings/media/video-interfaces.h>
> > > > > +
> > > > > +&isi_0 {
> > > > > + status = "disabled";
> > > > > +
> > > > > + ports {
> > > > > + port@1 {
> > > > > + /delete-node/ endpoint;
> > > > > + };
> > > > > + };
> > > > > +};
> > > > > +
> > > > > +&isp_1 {
> > > > > + status = "okay";
> > > > > +
> > > > > + ports {
> > > > > + port@1 {
> > > > > + isp1_in: endpoint {
> > > > > + bus-type =
<MEDIA_BUS_TYPE_PARALLEL>;
> > > > > + remote-endpoint =
<&mipi_csi_1_out>;
> > > > > + };
> > > > > + };
> > > > > + };
> > > > > +};
> > > > > +
> > > > > +&mipi_csi_1_out {
> > > > > + remote-endpoint = <&isp1_in>;
> > > > > +};
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
Powered by blists - more mailing lists