[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6d6f67cd-c0fb-5c91-9a14-0eabafe27e70@intel.com>
Date: Fri, 1 Dec 2023 08:49:29 +0100
From: Przemek Kitszel <przemyslaw.kitszel@...el.com>
To: Ivan Vecera <ivecera@...hat.com>, <netdev@...r.kernel.org>
CC: "moderated list:INTEL ETHERNET DRIVERS"
<intel-wired-lan@...ts.osuosl.org>,
Jesse Brandeburg <jesse.brandeburg@...el.com>,
Arkadiusz Kubalewski <arkadiusz.kubalewski@...el.com>,
Aleksandr Loktionov <aleksandr.loktionov@...el.com>,
Eric Dumazet <edumazet@...gle.com>,
"Tony Nguyen" <anthony.l.nguyen@...el.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
"David S. Miller" <davem@...emloft.net>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [Intel-wired-lan] [PATCH iwl-net] i40e: Fix wrong mask used
during DCB config
On 11/30/23 20:31, Ivan Vecera wrote:
> Mask used for clearing PRTDCB_RETSTCC register in function
> i40e_dcb_hw_rx_ets_bw_config() is incorrect as there is used
> define I40E_PRTDCB_RETSTCC_ETSTC_SHIFT instead of define
> I40E_PRTDCB_RETSTCC_ETSTC_MASK.
>
> The PRTDCB_RETSTCC register is used to configure whether ETS
> or strict priority is used as TSA in Rx for particular TC.
>
> In practice it means that once the register is set to use ETS
> as TSA then it is not possible to switch back to strict priority
> without CoreR reset.
>
> Fix the value in the clearing mask.
>
> Fixes: 90bc8e003be2 ("i40e: Add hardware configuration for software based DCB")
> Signed-off-by: Ivan Vecera <ivecera@...hat.com>
> ---
> drivers/net/ethernet/intel/i40e/i40e_dcb.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_dcb.c b/drivers/net/ethernet/intel/i40e/i40e_dcb.c
> index 68602fc375f6..073ffbfcbe8d 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_dcb.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_dcb.c
> @@ -1576,7 +1576,7 @@ void i40e_dcb_hw_rx_ets_bw_config(struct i40e_hw *hw, u8 *bw_share,
> reg = rd32(hw, I40E_PRTDCB_RETSTCC(i));
> reg &= ~(I40E_PRTDCB_RETSTCC_BWSHARE_MASK |
> I40E_PRTDCB_RETSTCC_UPINTC_MODE_MASK |
> - I40E_PRTDCB_RETSTCC_ETSTC_SHIFT);
> + I40E_PRTDCB_RETSTCC_ETSTC_MASK);
> reg |= ((u32)bw_share[i] << I40E_PRTDCB_RETSTCC_BWSHARE_SHIFT) &
> I40E_PRTDCB_RETSTCC_BWSHARE_MASK;
> reg |= ((u32)mode[i] << I40E_PRTDCB_RETSTCC_UPINTC_MODE_SHIFT) &
Thank you!
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@...el.com>
Powered by blists - more mailing lists