linux-kernel - [PATCH v2] net: usb: ax88179_178a: avoid failed operations when device is disconnected

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231201115143.177081-1-jtornosm@redhat.com>
Date:   Fri,  1 Dec 2023 12:51:43 +0100
From:   Jose Ignacio Tornos Martinez <jtornosm@...hat.com>
To:     stern@...land.harvard.edu
Cc:     davem@...emloft.net, edumazet@...gle.com, jtornosm@...hat.com,
        kuba@...nel.org, linux-kernel@...r.kernel.org,
        linux-usb@...r.kernel.org, netdev@...r.kernel.org,
        oneukum@...e.com, pabeni@...hat.com
Subject: [PATCH v2] net: usb: ax88179_178a: avoid failed operations when device is disconnected

When the device is disconnected we get the following messages showing
failed operations:
Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19

The reason is that although the device is detached, normal stop and
unbind operations are commanded from the driver. These operations are
not necessary in this situation, so avoid these logs when the device is
detached if the result of the operation is -ENODEV and if the new flag
informing about the stopping or unbind operation is enabled.

Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@...hat.com>
---
V1 -> V2:
- Follow the suggestions from Alan Stern and Oliver Neukum to check the
result of the operations (-ENODEV) and not the internal state of the USB 
layer (USB_STATE_NOTATTACHED).

 drivers/net/usb/ax88179_178a.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index 4ea0e155bb0d..105bae360128 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -173,6 +173,7 @@ struct ax88179_data {
 	u8 in_pm;
 	u32 wol_supported;
 	u32 wolopts;
+	u8 stopping_unbinding;
 };
 
 struct ax88179_int_data {
@@ -208,6 +209,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 {
 	int ret;
 	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
+	struct ax88179_data *ax179_data = dev->driver_priv;
 
 	BUG_ON(!dev);
 
@@ -219,7 +221,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 	ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 		 value, index, data, size);
 
-	if (unlikely(ret < 0))
+	if (unlikely(ret < 0 && !(ret == -ENODEV && ax179_data->stopping_unbinding)))
 		netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
 			    index, ret);
 
@@ -231,6 +233,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 {
 	int ret;
 	int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
+	struct ax88179_data *ax179_data = dev->driver_priv;
 
 	BUG_ON(!dev);
 
@@ -242,7 +245,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 	ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 		 value, index, data, size);
 
-	if (unlikely(ret < 0))
+	if (unlikely(ret < 0 && !(ret == -ENODEV && ax179_data->stopping_unbinding)))
 		netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
 			    index, ret);
 
@@ -1308,6 +1311,8 @@ static void ax88179_unbind(struct usbnet *dev, struct usb_interface *intf)
 	struct ax88179_data *ax179_data = dev->driver_priv;
 	u16 tmp16;
 
+	ax179_data->stopping_unbinding = 1;
+
 	/* Configure RX control register => stop operation */
 	tmp16 = AX_RX_CTL_STOP;
 	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &tmp16);
@@ -1319,6 +1324,8 @@ static void ax88179_unbind(struct usbnet *dev, struct usb_interface *intf)
 	tmp16 = 0;
 	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, &tmp16);
 
+	ax179_data->stopping_unbinding = 0;
+
 	kfree(ax179_data);
 }
 
@@ -1661,14 +1668,19 @@ static int ax88179_reset(struct usbnet *dev)
 
 static int ax88179_stop(struct usbnet *dev)
 {
+	struct ax88179_data *ax179_data = dev->driver_priv;
 	u16 tmp16;
 
+	ax179_data->stopping_unbinding = 1;
+
 	ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
 			 2, 2, &tmp16);
 	tmp16 &= ~AX_MEDIUM_RECEIVE_EN;
 	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
 			  2, 2, &tmp16);
 
+	ax179_data->stopping_unbinding = 0;
+
 	return 0;
 }
 
-- 
2.43.0