| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231202125948.10345-4-karelb@gimli.ms.mff.cuni.cz>
Date: Sat, 2 Dec 2023 13:48:34 +0100
From: Karel Balej <karelb@...li.ms.mff.cuni.cz>
To: Markuss Broks <markuss.broks@...il.com>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Henrik Rydberg <rydberg@...math.org>,
linux-input@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Duje Mihanović <duje.mihanovic@...le.hr>,
~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
Karel Balej <balejk@...fyz.cz>
Subject: [PATCH v3 3/5] input/touchscreen: imagis: Add support for Imagis IST3038B
From: Markuss Broks <markuss.broks@...il.com>
Imagis IST3038B is another variant of Imagis IST3038 IC, which has
a different register interface from IST3038C (possibly firmware defined).
This should also work for IST3044B (though untested), however other
variants using this interface/protocol(IST3026, IST3032, IST3026B,
IST3032B) have a different format for coordinates, and they'd need
additional effort to be supported by this driver.
Signed-off-by: Markuss Broks <markuss.broks@...il.com>
Signed-off-by: Karel Balej <balejk@...fyz.cz>
---
drivers/input/touchscreen/imagis.c | 58 ++++++++++++++++++++++++------
1 file changed, 47 insertions(+), 11 deletions(-)
diff --git a/drivers/input/touchscreen/imagis.c b/drivers/input/touchscreen/imagis.c
index e67fd3011027..84a02672ac47 100644
--- a/drivers/input/touchscreen/imagis.c
+++ b/drivers/input/touchscreen/imagis.c
@@ -13,7 +13,7 @@
#define IST3038C_HIB_ACCESS (0x800B << 16)
#define IST3038C_DIRECT_ACCESS BIT(31)
-#define IST3038C_REG_CHIPID 0x40001000
+#define IST3038C_REG_CHIPID (0x40001000 | IST3038C_DIRECT_ACCESS)
#define IST3038C_REG_HIB_BASE 0x30000100
#define IST3038C_REG_TOUCH_STATUS (IST3038C_REG_HIB_BASE | IST3038C_HIB_ACCESS)
#define IST3038C_REG_TOUCH_COORD (IST3038C_REG_HIB_BASE | IST3038C_HIB_ACCESS | 0x8)
@@ -31,8 +31,21 @@
#define IST3038C_FINGER_COUNT_SHIFT 12
#define IST3038C_FINGER_STATUS_MASK GENMASK(9, 0)
+#define IST3038B_REG_STATUS 0x20
+#define IST3038B_REG_CHIPID 0x30
+#define IST3038B_WHOAMI 0x30380b
+
+struct imagis_properties {
+ unsigned int interrupt_msg_cmd;
+ unsigned int touch_coord_cmd;
+ unsigned int whoami_cmd;
+ unsigned int whoami_val;
+ bool protocol_b;
+};
+
struct imagis_ts {
struct i2c_client *client;
+ const struct imagis_properties *tdata;
struct input_dev *input_dev;
struct touchscreen_properties prop;
struct regulator_bulk_data supplies[2];
@@ -84,8 +97,7 @@ static irqreturn_t imagis_interrupt(int irq, void *dev_id)
int i;
int error;
- error = imagis_i2c_read_reg(ts, IST3038C_REG_INTR_MESSAGE,
- &intr_message);
+ error = imagis_i2c_read_reg(ts, ts->tdata->interrupt_msg_cmd, &intr_message);
if (error) {
dev_err(&ts->client->dev,
"failed to read the interrupt message: %d\n", error);
@@ -104,9 +116,13 @@ static irqreturn_t imagis_interrupt(int irq, void *dev_id)
finger_pressed = intr_message & IST3038C_FINGER_STATUS_MASK;
for (i = 0; i < finger_count; i++) {
- error = imagis_i2c_read_reg(ts,
- IST3038C_REG_TOUCH_COORD + (i * 4),
- &finger_status);
+ if (ts->tdata->protocol_b)
+ error = imagis_i2c_read_reg(ts,
+ ts->tdata->touch_coord_cmd, &finger_status);
+ else
+ error = imagis_i2c_read_reg(ts,
+ ts->tdata->touch_coord_cmd + (i * 4),
+ &finger_status);
if (error) {
dev_err(&ts->client->dev,
"failed to read coordinates for finger %d: %d\n",
@@ -261,6 +277,12 @@ static int imagis_probe(struct i2c_client *i2c)
ts->client = i2c;
+ ts->tdata = device_get_match_data(dev);
+ if (!ts->tdata) {
+ dev_err(dev, "missing chip data\n");
+ return -EINVAL;
+ }
+
error = imagis_init_regulators(ts);
if (error) {
dev_err(dev, "regulator init error: %d\n", error);
@@ -279,15 +301,13 @@ static int imagis_probe(struct i2c_client *i2c)
return error;
}
- error = imagis_i2c_read_reg(ts,
- IST3038C_REG_CHIPID | IST3038C_DIRECT_ACCESS,
- &chip_id);
+ error = imagis_i2c_read_reg(ts, ts->tdata->whoami_cmd, &chip_id);
if (error) {
dev_err(dev, "chip ID read failure: %d\n", error);
return error;
}
- if (chip_id != IST3038C_WHOAMI) {
+ if (chip_id != ts->tdata->whoami_val) {
dev_err(dev, "unknown chip ID: 0x%x\n", chip_id);
return -EINVAL;
}
@@ -343,9 +363,25 @@ static int imagis_resume(struct device *dev)
static DEFINE_SIMPLE_DEV_PM_OPS(imagis_pm_ops, imagis_suspend, imagis_resume);
+static const struct imagis_properties imagis_3038b_data = {
+ .interrupt_msg_cmd = IST3038B_REG_STATUS,
+ .touch_coord_cmd = IST3038B_REG_STATUS,
+ .whoami_cmd = IST3038B_REG_CHIPID,
+ .whoami_val = IST3038B_WHOAMI,
+ .protocol_b = true,
+};
+
+static const struct imagis_properties imagis_3038c_data = {
+ .interrupt_msg_cmd = IST3038C_REG_INTR_MESSAGE,
+ .touch_coord_cmd = IST3038C_REG_TOUCH_COORD,
+ .whoami_cmd = IST3038C_REG_CHIPID,
+ .whoami_val = IST3038C_WHOAMI,
+};
+
#ifdef CONFIG_OF
static const struct of_device_id imagis_of_match[] = {
- { .compatible = "imagis,ist3038c", },
+ { .compatible = "imagis,ist3038b", .data = &imagis_3038b_data },
+ { .compatible = "imagis,ist3038c", .data = &imagis_3038c_data },
{ },
};
MODULE_DEVICE_TABLE(of, imagis_of_match);
--
2.43.0
Powered by blists - more mailing lists