[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231203114333.1305826-6-dmitry.baryshkov@linaro.org>
Date: Sun, 3 Dec 2023 14:43:32 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
Andrzej Hajda <andrzej.hajda@...el.com>,
Neil Armstrong <neil.armstrong@...aro.org>,
Robert Foss <rfoss@...nel.org>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
"Bryan O'Donoghue" <bryan.odonoghue@...aro.org>,
Guenter Roeck <linux@...ck-us.net>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Janne Grunau <j@...nau.net>, Simon Ser <contact@...rsion.fr>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>
Cc: dri-devel@...ts.freedesktop.org, linux-arm-msm@...r.kernel.org,
linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
freedreno@...ts.freedesktop.org
Subject: [PATCH RESEND 5/6] soc: qcom: pmic-glink: switch to DRM_AUX_HPD_BRIDGE
Use the freshly defined DRM_AUX_HPD_BRIDGE instead of open-coding the
same functionality for the DRM bridge chain termination.
Reviewed-by: Bjorn Andersson <andersson@...nel.org>
Acked-by: Bjorn Andersson <andersson@...nel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
---
drivers/soc/qcom/Kconfig | 1 +
drivers/soc/qcom/pmic_glink_altmode.c | 33 ++++++++-------------------
2 files changed, 10 insertions(+), 24 deletions(-)
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index b3634e10f6f5..c954001ae79e 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -86,6 +86,7 @@ config QCOM_PMIC_GLINK
depends on OF
select AUXILIARY_BUS
select QCOM_PDR_HELPERS
+ select DRM_AUX_HPD_BRIDGE
help
The Qualcomm PMIC GLINK driver provides access, over GLINK, to the
USB and battery firmware running on one of the coprocessors in
diff --git a/drivers/soc/qcom/pmic_glink_altmode.c b/drivers/soc/qcom/pmic_glink_altmode.c
index b78279e2f54c..053b7393e26a 100644
--- a/drivers/soc/qcom/pmic_glink_altmode.c
+++ b/drivers/soc/qcom/pmic_glink_altmode.c
@@ -11,7 +11,7 @@
#include <linux/mutex.h>
#include <linux/property.h>
#include <linux/soc/qcom/pdr.h>
-#include <drm/drm_bridge.h>
+#include <drm/bridge/aux-bridge.h>
#include <linux/usb/typec_altmode.h>
#include <linux/usb/typec_dp.h>
@@ -76,7 +76,7 @@ struct pmic_glink_altmode_port {
struct work_struct work;
- struct drm_bridge bridge;
+ struct device *bridge;
enum typec_orientation orientation;
u16 svid;
@@ -230,10 +230,10 @@ static void pmic_glink_altmode_worker(struct work_struct *work)
else
pmic_glink_altmode_enable_usb(altmode, alt_port);
- if (alt_port->hpd_state)
- drm_bridge_hpd_notify(&alt_port->bridge, connector_status_connected);
- else
- drm_bridge_hpd_notify(&alt_port->bridge, connector_status_disconnected);
+ drm_aux_hpd_bridge_notify(alt_port->bridge,
+ alt_port->hpd_state ?
+ connector_status_connected :
+ connector_status_disconnected);
pmic_glink_altmode_request(altmode, ALTMODE_PAN_ACK, alt_port->index);
};
@@ -365,16 +365,6 @@ static void pmic_glink_altmode_callback(const void *data, size_t len, void *priv
}
}
-static int pmic_glink_altmode_attach(struct drm_bridge *bridge,
- enum drm_bridge_attach_flags flags)
-{
- return flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR ? 0 : -EINVAL;
-}
-
-static const struct drm_bridge_funcs pmic_glink_altmode_bridge_funcs = {
- .attach = pmic_glink_altmode_attach,
-};
-
static void pmic_glink_altmode_put_retimer(void *data)
{
typec_retimer_put(data);
@@ -464,15 +454,10 @@ static int pmic_glink_altmode_probe(struct auxiliary_device *adev,
alt_port->index = port;
INIT_WORK(&alt_port->work, pmic_glink_altmode_worker);
- alt_port->bridge.funcs = &pmic_glink_altmode_bridge_funcs;
- alt_port->bridge.of_node = to_of_node(fwnode);
- alt_port->bridge.ops = DRM_BRIDGE_OP_HPD;
- alt_port->bridge.type = DRM_MODE_CONNECTOR_DisplayPort;
-
- ret = devm_drm_bridge_add(dev, &alt_port->bridge);
- if (ret) {
+ alt_port->bridge = drm_dp_hpd_bridge_register(dev, to_of_node(fwnode));
+ if (IS_ERR(alt_port->bridge)) {
fwnode_handle_put(fwnode);
- return ret;
+ return PTR_ERR(alt_port->bridge);
}
alt_port->dp_alt.svid = USB_TYPEC_DP_SID;
--
2.39.2
Powered by blists - more mailing lists