lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <20231203052125.37334-1-liuhaoran14@163.com> Date: Sat, 2 Dec 2023 21:21:25 -0800 From: Haoran Liu <liuhaoran14@....com> To: support.opensource@...semi.com Cc: lee@...nel.org, linux-kernel@...r.kernel.org, Haoran Liu <liuhaoran14@....com> Subject: [PATCH] [mfd] da9052: Add error handling for spi_setup in da9052_spi_probe This patch adds error handling for the spi_setup call. The need for this error handling was identified through static analysis, which highlighted the lack of proper handling for potential failures of spi_setup. Previously, a failure in spi_setup could lead to unstable behavior of the DA9052 device. Although the error addressed by this patch may not occur in the current environment, I still suggest implementing these error handling routines if the function is not highly time-sensitive. As the environment evolves or the code gets reused in different contexts, there's a possibility that these errors might occur. In case you find this addition unnecessary, I completely understand and respect your perspective. My intention was to enhance the robustness of the code, but I acknowledge that practical considerations and current functionality might not warrant this change at this point. Signed-off-by: Haoran Liu <liuhaoran14@....com> --- drivers/mfd/da9052-spi.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/mfd/da9052-spi.c b/drivers/mfd/da9052-spi.c index be5f2b34e18a..c32d5025a18f 100644 --- a/drivers/mfd/da9052-spi.c +++ b/drivers/mfd/da9052-spi.c @@ -22,6 +22,7 @@ static int da9052_spi_probe(struct spi_device *spi) int ret; const struct spi_device_id *id = spi_get_device_id(spi); struct da9052 *da9052; + int ret; da9052 = devm_kzalloc(&spi->dev, sizeof(struct da9052), GFP_KERNEL); if (!da9052) @@ -29,7 +30,11 @@ static int da9052_spi_probe(struct spi_device *spi) spi->mode = SPI_MODE_0; spi->bits_per_word = 8; - spi_setup(spi); + ret = spi_setup(spi); + if (ret) { + dev_err(&spi->dev, "spi_setup failed: %d\n", ret); + return ret; + } da9052->dev = &spi->dev; da9052->chip_irq = spi->irq; -- 2.17.1
Powered by blists - more mailing lists