[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231204152301.6c212539@jic23-huawei>
Date: Mon, 4 Dec 2023 15:23:01 +0000
From: Jonathan Cameron <jic23@...nel.org>
To: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@...nel.org>
Cc: <nuno.sa@...log.com>, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-iio@...r.kernel.org,
Olivier MOYSAN <olivier.moysan@...s.st.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Frank Rowand <frowand.list@...il.com>,
Lars-Peter Clausen <lars@...afoo.de>,
Michael Hennerich <Michael.Hennerich@...log.com>
Subject: Re: [PATCH 06/12] iio: adc: ad9467: add mutex to struct
ad9467_state
On Tue, 21 Nov 2023 11:20:19 +0100
Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@...nel.org> wrote:
> From: Nuno Sa <nuno.sa@...log.com>
>
> When calling ad9467_set_scale(), multiple calls to ad9467_spi_write()
> are done which means we need to properly protect the whole operation so
> we are sure we will be in a sane state if two concurrent calls occur.
>
> Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC")
> Signed-off-by: Nuno Sa <nuno.sa@...log.com>
> ---
> drivers/iio/adc/ad9467.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c
> index 04474dbfa631..91821dee03b7 100644
> --- a/drivers/iio/adc/ad9467.c
> +++ b/drivers/iio/adc/ad9467.c
> @@ -4,7 +4,7 @@
> *
> * Copyright 2012-2020 Analog Devices Inc.
> */
> -
> +#include <linux/cleanup.h>
> #include <linux/module.h>
> #include <linux/mutex.h>
> #include <linux/device.h>
> @@ -122,6 +122,8 @@ struct ad9467_state {
> unsigned int output_mode;
>
> struct gpio_desc *pwrdown_gpio;
> + /* protect against concurrent accesses to the device */
Not very specific. Concurrent access usually fine at granularity of
individual read/write as the bus locks protect it. What state
is actually being protected? A shared buffer or some state that we
need to ensure remains consistent between driver and device?
> + struct mutex lock;
> };
>
> static int ad9467_spi_read(struct spi_device *spi, unsigned int reg)
> @@ -162,6 +164,7 @@ static int ad9467_reg_access(struct adi_axi_adc_conv *conv, unsigned int reg,
> int ret;
>
> if (!readval) {
> + guard(mutex)(&st->lock);
> ret = ad9467_spi_write(spi, reg, writeval);
> if (ret)
> return ret;
> @@ -310,6 +313,7 @@ static int ad9467_set_scale(struct adi_axi_adc_conv *conv, int val, int val2)
> if (scale_val[0] != val || scale_val[1] != val2)
> continue;
>
> + guard(mutex)(&st->lock);
> ret = ad9467_spi_write(st->spi, AN877_ADC_REG_VREF,
> info->scale_table[i][1]);
> if (ret < 0)
>
Powered by blists - more mailing lists