[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <96dd3f54-9560-4587-b4e8-bf75422ff5ef@tuxon.dev>
Date: Mon, 4 Dec 2023 09:41:51 +0200
From: claudiu beznea <claudiu.beznea@...on.dev>
To: Geert Uytterhoeven <geert@...ux-m68k.org>
Cc: s.shtylyov@....ru, davem@...emloft.net, edumazet@...gle.com,
kuba@...nel.org, pabeni@...hat.com, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
linux@...linux.org.uk, magnus.damm@...il.com,
mturquette@...libre.com, sboyd@...nel.org,
linus.walleij@...aro.org, p.zabel@...gutronix.de, arnd@...db.de,
m.szyprowski@...sung.com, alexandre.torgue@...s.st.com, afd@...com,
broonie@...nel.org, alexander.stein@...tq-group.com,
eugen.hristev@...labora.com, sergei.shtylyov@...il.com,
prabhakar.mahadev-lad.rj@...renesas.com,
biju.das.jz@...renesas.com, linux-renesas-soc@...r.kernel.org,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-clk@...r.kernel.org, linux-gpio@...r.kernel.org,
Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Subject: Re: [PATCH 10/14] arm64: renesas: r9a08g045: Add Ethernet nodes
Hi, Geert,
On 01.12.2023 19:35, Geert Uytterhoeven wrote:
> Hi Claudiu,
>
> On Mon, Nov 20, 2023 at 8:01 AM Claudiu <claudiu.beznea@...on.dev> wrote:
>> From: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
>>
>> Add Ethernet nodes available on RZ/G3S (R9A08G045).
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
>
> Thanks for your patch!
>
>> --- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
>> +++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
>> @@ -149,6 +149,38 @@ sdhi2: mmc@...20000 {
>> status = "disabled";
>> };
>>
>> + eth0: ethernet@...30000 {
>> + compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
>> + reg = <0 0x11c30000 0 0x10000>;
>> + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "mux", "fil", "arp_ns";
>> + clocks = <&cpg CPG_MOD R9A08G045_ETH0_CLK_AXI>,
>> + <&cpg CPG_MOD R9A08G045_ETH0_CLK_CHI>,
>> + <&cpg CPG_MOD R9A08G045_ETH0_REFCLK>;
>> + clock-names = "axi", "chi", "refclk";
>> + resets = <&cpg R9A08G045_ETH0_RST_HW_N>;
>> + power-domains = <&cpg>;
>
> Perhaps add a default phy mode, like on other SoCs?
>
> phy-mode = "rgmii"';
I skipped this (even it was available on the other SoCs) as I consider the
phy-mode is board specific.
>
> Also missing:
>
> #address-cells = <1>;
> #size-cells = <0>;
Same for these.
>
>> + status = "disabled";
>> + };
>
> Same comments for eth1.
>
> Gr{oetje,eeting}s,
>
> Geert
>
Powered by blists - more mailing lists