linux-kernel - Re: [PATCH v3] usb: hub: Add quirk to decrease IN-ep poll interval for Microchip USB491x hub

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <2023120437-opposite-juiciness-e0dd@gregkh>
Date:   Mon, 4 Dec 2023 08:02:50 +0100
From:   Greg KH <gregkh@...uxfoundation.org>
To:     Alan Stern <stern@...land.harvard.edu>
Cc:     Hardik Gajjar <hgajjar@...adit-jv.com>, corbet@....net,
        linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
        erosca@...adit-jv.com, tj@...nel.org, paulmck@...nel.org,
        Martin.Mueller5@...bosch.com
Subject: Re: [PATCH v3] usb: hub: Add quirk to decrease IN-ep poll interval
 for Microchip USB491x hub

On Fri, Dec 01, 2023 at 11:13:53AM -0500, Alan Stern wrote:
> On Fri, Dec 01, 2023 at 03:47:05PM +0100, Hardik Gajjar wrote:
> > There is a potential delay in notifying Linux USB drivers of downstream
> > USB bus activity when connecting a high-speed or superSpeed device via the
> > Microchip USB491x hub. This delay is due to the fixed bInterval value of
> > 12 in the silicon of the Microchip USB491x hub.
> > 
> > Microchip requested to ignore the device descriptor and decrease that
> > value to 9 as it was too late to modify that in silicon.
> > 
> > This patch speeds up the USB enummeration process that helps to pass
> > Apple Carplay certifications and improve the User experience when utilizing
> > the USB device via Microchip Multihost USB491x Hub.
> > 
> > A new hub quirk HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL speeds up
> > the notification process for Microchip USB491x hub by limiting
> > the maximum bInterval value to 9.
> > 
> > Signed-off-by: Hardik Gajjar <hgajjar@...adit-jv.com>
> > ---
> > changes since version 1:
> > 	- Move implementation from config.c and quirk.c to hub.c as this is hub
> > 	  specific changes.
> > 	- Improve commit message.
> > 	- Link to v1 - https://lore.kernel.org/all/20231123081948.58776-1-hgajjar@de.adit-jv.com/
> > 
> > changes since version 2:
> >     - Call usb_set_interface after updating the bInterval to Tell the HCD about modification
> > 	- Link to v2 - https://lore.kernel.org/all/20231130084855.119937-1-hgajjar@de.adit-jv.com/
> > ---
> >  drivers/usb/core/hub.c | 27 +++++++++++++++++++++++++++
> >  1 file changed, 27 insertions(+)
> > 
> > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> > index b4584a0cd484..b5ac29c5f016 100644
> > --- a/drivers/usb/core/hub.c
> > +++ b/drivers/usb/core/hub.c
> > @@ -47,12 +47,18 @@
> >  #define USB_VENDOR_TEXAS_INSTRUMENTS		0x0451
> >  #define USB_PRODUCT_TUSB8041_USB3		0x8140
> >  #define USB_PRODUCT_TUSB8041_USB2		0x8142
> > +#define USB_VENDOR_MICROCHIP			0x0424
> > +#define USB_PRODUCT_USB4913			0x4913
> > +#define USB_PRODUCT_USB4914			0x4914
> > +#define USB_PRODUCT_USB4915			0x4915
> >  #define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND	0x01
> >  #define HUB_QUIRK_DISABLE_AUTOSUSPEND		0x02
> > +#define HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL	0x08
> 
> Why use 0x08 instead of 0x04?

And why not use BIT() as that's what these are.

thanks,

greg k-h