[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c309c907d7e1dd34dcc782e23ec0344aeadf2955.1701770394.git.ante.knezic@helmholz.de>
Date: Tue, 5 Dec 2023 11:03:39 +0100
From: Ante Knezic <ante.knezic@...mholz.de>
To: <netdev@...r.kernel.org>
CC: <woojung.huh@...rochip.com>, <andrew@...n.ch>,
<f.fainelli@...il.com>, <olteanv@...il.com>, <davem@...emloft.net>,
<edumazet@...gle.com>, <kuba@...nel.org>, <pabeni@...hat.com>,
<robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
<conor+dt@...nel.org>, <marex@...x.de>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<UNGLinuxDriver@...rochip.com>,
Ante Knezic <ante.knezic@...mholz.de>
Subject: [PATCH net-next v7 2/2] net: dsa: microchip: add property to select internal RMII reference clock
Microchip KSZ8863/KSZ8873 have the ability to select between internal
and external RMII reference clock. By default, reference clock
needs to be provided via REFCLKI_3 pin. If required, device can be
setup to provide RMII clock internally so that REFCLKI_3 pin can be
left unconnected.
Add a new "microchip,rmii-clk-internal" property which will set
RMII clock reference to internal. If property is not set, reference
clock needs to be provided externally.
While at it, move the ksz8795_cpu_interface_select() to
ksz8_config_cpu_port() to get a cleaner call path for cpu port.
Signed-off-by: Ante Knezic <ante.knezic@...mholz.de>
---
drivers/net/dsa/microchip/ksz8795.c | 29 +++++++++++++++++++++++------
drivers/net/dsa/microchip/ksz8795_reg.h | 3 +++
2 files changed, 26 insertions(+), 6 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index ec1ddfcf7473..61b71bcfe396 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -1358,6 +1358,9 @@ static void ksz8795_cpu_interface_select(struct ksz_device *dev, int port)
{
struct ksz_port *p = &dev->ports[port];
+ if (!ksz_is_ksz87xx(dev))
+ return;
+
if (!p->interface && dev->compat_interface) {
dev_warn(dev->dev,
"Using legacy switch \"phy-mode\" property, because it is missing on port %d node. "
@@ -1391,18 +1394,29 @@ void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port)
/* enable 802.1p priority */
ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true);
- if (cpu_port) {
- if (!ksz_is_ksz88x3(dev))
- ksz8795_cpu_interface_select(dev, port);
-
+ if (cpu_port)
member = dsa_user_ports(ds);
- } else {
+ else
member = BIT(dsa_upstream_port(ds, port));
- }
ksz8_cfg_port_member(dev, port, member);
}
+static void ksz88x3_config_rmii_clk(struct ksz_device *dev)
+{
+ struct dsa_port *cpu_dp = dsa_to_port(dev->ds, dev->cpu_port);
+ bool rmii_clk_internal;
+
+ if (!ksz_is_ksz88x3(dev))
+ return;
+
+ rmii_clk_internal = of_property_read_bool(cpu_dp->dn,
+ "microchip,rmii-clk-internal");
+
+ ksz_cfg(dev, KSZ88X3_REG_FVID_AND_HOST_MODE,
+ KSZ88X3_PORT3_RMII_CLK_INTERNAL, rmii_clk_internal);
+}
+
void ksz8_config_cpu_port(struct dsa_switch *ds)
{
struct ksz_device *dev = ds->priv;
@@ -1419,6 +1433,9 @@ void ksz8_config_cpu_port(struct dsa_switch *ds)
ksz8_port_setup(dev, dev->cpu_port, true);
+ ksz8795_cpu_interface_select(dev, dev->cpu_port);
+ ksz88x3_config_rmii_clk(dev);
+
for (i = 0; i < dev->phy_port_cnt; i++) {
ksz_port_stp_state_set(ds, i, BR_STATE_DISABLED);
}
diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h
index 3c9dae53e4d8..beca974e0171 100644
--- a/drivers/net/dsa/microchip/ksz8795_reg.h
+++ b/drivers/net/dsa/microchip/ksz8795_reg.h
@@ -22,6 +22,9 @@
#define KSZ8863_GLOBAL_SOFTWARE_RESET BIT(4)
#define KSZ8863_PCS_RESET BIT(0)
+#define KSZ88X3_REG_FVID_AND_HOST_MODE 0xC6
+#define KSZ88X3_PORT3_RMII_CLK_INTERNAL BIT(3)
+
#define REG_SW_CTRL_0 0x02
#define SW_NEW_BACKOFF BIT(7)
--
2.11.0
Powered by blists - more mailing lists