lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231205002854.76niknoiakdraruc@flo-XPS-13-7390> Date: Tue, 5 Dec 2023 01:28:54 +0100 From: laburnumT <laburnumtec@...il.com> To: gregkh@...uxfoundation.org Cc: linux-fbdev@...r.kernel.org, linux-staging@...ts.linux.dev, linux-kernel@...r.kernel.org Subject: [PATCH] staging: sm750fb: fix coding style camelCase issue Fixed camelCase issues in ddk750_sii164.c and impacted files. Signed-off-by: laburnumT <laburnumtec@...il.com> --- drivers/staging/sm750fb/ddk750_dvi.c | 16 +-- drivers/staging/sm750fb/ddk750_sii164.c | 130 ++++++++++++------------ drivers/staging/sm750fb/ddk750_sii164.h | 16 +-- 3 files changed, 81 insertions(+), 81 deletions(-) diff --git a/drivers/staging/sm750fb/ddk750_dvi.c b/drivers/staging/sm750fb/ddk750_dvi.c index 8b81e8642f9e..40d92e4bd1f9 100644 --- a/drivers/staging/sm750fb/ddk750_dvi.c +++ b/drivers/staging/sm750fb/ddk750_dvi.c @@ -16,15 +16,15 @@ static struct dvi_ctrl_device dcft_supported_dvi_controller[] = { { .init = sii164_init_chip, .get_vendor_id = sii164_get_vendor_id, - .get_device_id = sii164GetDeviceID, + .get_device_id = sii164_get_device_id, #ifdef SII164_FULL_FUNCTIONS - .reset_chip = sii164ResetChip, - .get_chip_string = sii164GetChipString, - .set_power = sii164SetPower, - .enable_hot_plug_detection = sii164EnableHotPlugDetection, - .is_connected = sii164IsConnected, - .check_interrupt = sii164CheckInterrupt, - .clear_interrupt = sii164ClearInterrupt, + .reset_chip = sii164_reset_chip, + .get_chip_string = sii164_get_chip_string, + .set_power = sii164_set_power, + .enable_hot_plug_detection = sii164_enable_hotplug_detection, + .is_connected = sii164_is_connected, + .check_interrupt = sii164_check_interrupt, + .clear_interrupt = sii164_clear_interrupt, #endif }, #endif diff --git a/drivers/staging/sm750fb/ddk750_sii164.c b/drivers/staging/sm750fb/ddk750_sii164.c index 2532b60245ac..596a00101352 100644 --- a/drivers/staging/sm750fb/ddk750_sii164.c +++ b/drivers/staging/sm750fb/ddk750_sii164.c @@ -25,7 +25,7 @@ #ifdef SII164_FULL_FUNCTIONS /* Name of the DVI Controller chip */ -static char *gDviCtrlChipName = "Silicon Image SiI 164"; +static char *g_dvi_ctrl_chip_name = "Silicon Image SiI 164"; #endif /* @@ -37,33 +37,33 @@ static char *gDviCtrlChipName = "Silicon Image SiI 164"; */ unsigned short sii164_get_vendor_id(void) { - unsigned short vendorID; + unsigned short vendor_id; - vendorID = ((unsigned short)i2cReadReg(SII164_I2C_ADDRESS, - SII164_VENDOR_ID_HIGH) << 8) | - (unsigned short)i2cReadReg(SII164_I2C_ADDRESS, - SII164_VENDOR_ID_LOW); + vendor_id = ((unsigned short)i2cReadReg(SII164_I2C_ADDRESS, + SII164_VENDOR_ID_HIGH) << 8) | + (unsigned short)i2cReadReg(SII164_I2C_ADDRESS, + SII164_VENDOR_ID_LOW); - return vendorID; + return vendor_id; } /* - * sii164GetDeviceID + * sii164_get_device_id * This function gets the device ID of the DVI controller chip. * * Output: * Device ID */ -unsigned short sii164GetDeviceID(void) +unsigned short sii164_get_device_id(void) { - unsigned short deviceID; + unsigned short device_id; - deviceID = ((unsigned short)i2cReadReg(SII164_I2C_ADDRESS, - SII164_DEVICE_ID_HIGH) << 8) | - (unsigned short)i2cReadReg(SII164_I2C_ADDRESS, - SII164_DEVICE_ID_LOW); + device_id = ((unsigned short)i2cReadReg(SII164_I2C_ADDRESS, + SII164_DEVICE_ID_HIGH) << 8) | + (unsigned short)i2cReadReg(SII164_I2C_ADDRESS, + SII164_DEVICE_ID_LOW); - return deviceID; + return device_id; } /* @@ -141,7 +141,7 @@ long sii164_init_chip(unsigned char edge_select, /* Check if SII164 Chip exists */ if ((sii164_get_vendor_id() == SII164_VENDOR_ID) && - (sii164GetDeviceID() == SII164_DEVICE_ID)) { + (sii164_get_device_id() == SII164_DEVICE_ID)) { /* * Initialize SII164 controller chip. */ @@ -250,41 +250,41 @@ long sii164_init_chip(unsigned char edge_select, #ifdef SII164_FULL_FUNCTIONS /* - * sii164ResetChip + * sii164_reset_chip * This function resets the DVI Controller Chip. */ -void sii164ResetChip(void) +void sii164_reset_chip(void) { /* Power down */ - sii164SetPower(0); - sii164SetPower(1); + sii164_set_power(0); + sii164_set_power(1); } /* - * sii164GetChipString + * sii164_get_chip_string * This function returns a char string name of the current DVI Controller * chip. * * It's convenient for application need to display the chip name. */ -char *sii164GetChipString(void) +char *sii164_get_chip_string(void) { - return gDviCtrlChipName; + return g_dvi_ctrl_chip_name; } /* - * sii164SetPower + * sii164_set_power * This function sets the power configuration of the DVI Controller Chip. * * Input: - * powerUp - Flag to set the power down or up + * power_up - Flag to set the power down or up */ -void sii164SetPower(unsigned char powerUp) +void sii164_set_power(unsigned char power_up) { unsigned char config; config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION); - if (powerUp == 1) { + if (power_up == 1) { /* Power up the chip */ config &= ~SII164_CONFIGURATION_POWER_MASK; config |= SII164_CONFIGURATION_POWER_NORMAL; @@ -298,109 +298,109 @@ void sii164SetPower(unsigned char powerUp) } /* - * sii164SelectHotPlugDetectionMode + * sii164_select_hotplug_detection_mode * This function selects the mode of the hot plug detection. */ static -void sii164SelectHotPlugDetectionMode(enum sii164_hot_plug_mode hotPlugMode) +void sii164_select_hotplug_detection_mode(enum sii164_hot_plug_mode hotplug_mode) { - unsigned char detectReg; + unsigned char detect_reg; - detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & - ~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG; - switch (hotPlugMode) { + detect_reg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & + ~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG; + switch (hotplug_mode) { case SII164_HOTPLUG_DISABLE: - detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH; + detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH; break; case SII164_HOTPLUG_USE_MDI: - detectReg &= ~SII164_DETECT_INTERRUPT_MASK; - detectReg |= SII164_DETECT_INTERRUPT_BY_HTPLG_PIN; - detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_MDI; + detect_reg &= ~SII164_DETECT_INTERRUPT_MASK; + detect_reg |= SII164_DETECT_INTERRUPT_BY_HTPLG_PIN; + detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_MDI; break; case SII164_HOTPLUG_USE_RSEN: - detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_RSEN; + detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_RSEN; break; case SII164_HOTPLUG_USE_HTPLG: - detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HTPLG; + detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HTPLG; break; } - i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT, detectReg); + i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT, detect_reg); } /* - * sii164EnableHotPlugDetection + * sii164_enable_hotplug_detection * This function enables the Hot Plug detection. * - * enableHotPlug - Enable (=1) / disable (=0) Hot Plug detection + * enable_hotplug - Enable (=1) / disable (=0) Hot Plug detection */ -void sii164EnableHotPlugDetection(unsigned char enableHotPlug) +void sii164_enable_hotplug_detection(unsigned char enable_hotplug) { - unsigned char detectReg; + unsigned char detect_reg; - detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT); + detect_reg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT); /* Depending on each DVI controller, need to enable the hot plug based * on each individual chip design. */ - if (enableHotPlug != 0) - sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_USE_MDI); + if (enable_hotplug != 0) + sii164_select_hotplug_detection_mode(SII164_HOTPLUG_USE_MDI); else - sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_DISABLE); + sii164_select_hotplug_detection_mode(SII164_HOTPLUG_DISABLE); } /* - * sii164IsConnected + * sii164_is_connected * Check if the DVI Monitor is connected. * * Output: * 0 - Not Connected * 1 - Connected */ -unsigned char sii164IsConnected(void) +unsigned char sii164_is_connected(void) { - unsigned char hotPlugValue; + unsigned char hotplug_value; - hotPlugValue = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & - SII164_DETECT_HOT_PLUG_STATUS_MASK; - if (hotPlugValue == SII164_DETECT_HOT_PLUG_STATUS_ON) + hotplug_value = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & + SII164_DETECT_HOT_PLUG_STATUS_MASK; + if (hotplug_value == SII164_DETECT_HOT_PLUG_STATUS_ON) return 1; else return 0; } /* - * sii164CheckInterrupt + * sii164_check_interrupt * Checks if interrupt has occurred. * * Output: * 0 - No interrupt * 1 - Interrupt occurs */ -unsigned char sii164CheckInterrupt(void) +unsigned char sii164_check_interrupt(void) { - unsigned char detectReg; + unsigned char detect_reg; - detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & - SII164_DETECT_MONITOR_STATE_MASK; - if (detectReg == SII164_DETECT_MONITOR_STATE_CHANGE) + detect_reg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & + SII164_DETECT_MONITOR_STATE_MASK; + if (detect_reg == SII164_DETECT_MONITOR_STATE_CHANGE) return 1; else return 0; } /* - * sii164ClearInterrupt + * sii164_clear_interrupt * Clear the hot plug interrupt. */ -void sii164ClearInterrupt(void) +void sii164_clear_interrupt(void) { - unsigned char detectReg; + unsigned char detect_reg; /* Clear the MDI interrupt */ - detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT); + detect_reg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT); i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT, - detectReg | SII164_DETECT_MONITOR_STATE_CLEAR); + detect_reg | SII164_DETECT_MONITOR_STATE_CLEAR); } #endif diff --git a/drivers/staging/sm750fb/ddk750_sii164.h b/drivers/staging/sm750fb/ddk750_sii164.h index 71a7c1cb42c4..52c087a15095 100644 --- a/drivers/staging/sm750fb/ddk750_sii164.h +++ b/drivers/staging/sm750fb/ddk750_sii164.h @@ -28,16 +28,16 @@ long sii164_init_chip(unsigned char edgeSelect, unsigned char pllFilterValue); unsigned short sii164_get_vendor_id(void); -unsigned short sii164GetDeviceID(void); +unsigned short sii164_get_device_id(void); #ifdef SII164_FULL_FUNCTIONS -void sii164ResetChip(void); -char *sii164GetChipString(void); -void sii164SetPower(unsigned char powerUp); -void sii164EnableHotPlugDetection(unsigned char enableHotPlug); -unsigned char sii164IsConnected(void); -unsigned char sii164CheckInterrupt(void); -void sii164ClearInterrupt(void); +void sii164_reset_chip(void); +char *sii164_get_chip_string(void); +void sii164_set_power(unsigned char power_up); +void sii164_enable_hotplug_detection(unsigned char enable_hotplug); +unsigned char sii164_is_connected(void); +unsigned char sii164_check_interrupt(void); +void sii164_clear_interrupt(void); #endif /* * below register definition is used for -- 2.34.1
Powered by blists - more mailing lists