| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231205111351.xjjuwpbf7kwg3vuh@skbuf>
Date: Tue, 5 Dec 2023 13:13:51 +0200
From: Vladimir Oltean <olteanv@...il.com>
To: Serge Semin <fancer.lancer@...il.com>
Cc: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
Jose Abreu <Jose.Abreu@...opsys.com>,
Maxime Chevallier <maxime.chevallier@...tlin.com>,
Tomer Maimon <tmaimon77@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, openbmc@...ts.ozlabs.org,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next 10/16] net: pcs: xpcs: Add generic DW XPCS
MDIO-device support
On Tue, Dec 05, 2023 at 01:35:31PM +0300, Serge Semin wrote:
> @@ -1436,21 +1480,32 @@ static struct dw_xpcs *xpcs_create(struct mdio_device *mdiodev,
> struct dw_xpcs *xpcs;
> int ret;
>
> + ret = device_attach(&mdiodev->dev);
> + if (ret < 0 && ret != -ENODEV)
> + return ERR_PTR(ret);
> +
> xpcs = xpcs_create_data(mdiodev);
> if (IS_ERR(xpcs))
> return xpcs;
>
> + ret = xpcs_init_clks(xpcs);
> + if (ret)
> + goto out_free_data;
> +
> ret = xpcs_init_id(xpcs);
> if (ret)
> - goto out;
> + goto out_clear_clks;
>
> ret = xpcs_init_iface(xpcs, interface);
> if (ret)
> - goto out;
> + goto out_clear_clks;
>
> return xpcs;
[ 4.083518] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0
[ 4.092356] Mem abort info:
[ 4.095164] ESR = 0x0000000096000004
[ 4.098932] EC = 0x25: DABT (current EL), IL = 32 bits
[ 4.104277] SET = 0, FnV = 0
[ 4.107352] EA = 0, S1PTW = 0
[ 4.110505] FSC = 0x04: level 0 translation fault
[ 4.115408] Data abort info:
[ 4.118296] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 4.123807] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 4.128877] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 4.134214] [00000000000000d0] user address but active_mm is swapper
[ 4.140595] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 4.146882] Modules linked in:
[ 4.149944] CPU: 0 PID: 11 Comm: kworker/u4:0 Not tainted 6.7.0-rc3-00719-g75be5ea8e111-dirty #1551
[ 4.164524] Workqueue: events_unbound deferred_probe_work_func
[ 4.177372] pc : __device_attach+0x3c/0x1bc
[ 4.181570] lr : __device_attach+0x38/0x1bc
[ 4.185767] sp : ffff8000800f3800
[ 4.189087] x29: ffff8000800f3820 x28: 0000000000000001 x27: ffff063781bda150
[ 4.196252] x26: ffff063781bda150 x25: ffff063780827480 x24: ffffcb9a08138a40
[ 4.203416] x23: ffff063781114080 x22: 0000000000000000 x21: 0000000000000004
[ 4.210579] x20: ffff06378123a400 x19: ffff06378123a480 x18: ffffcb9a07c703a0
[ 4.217743] x17: ffffcb9a07c703a4 x16: 00000000000000d4 x15: ffffcb9a07be70fc
[ 4.224906] x14: ffffcb9a08299638 x13: 0000000000000053 x12: ffff003000000200
[ 4.232069] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[ 4.239233] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003a
[ 4.246396] x5 : ffff0637809a037b x4 : ffffcb9a087b0d47 x3 : ffff10300000020f
[ 4.253560] x2 : ffffcb9a0910c561 x1 : 0000000000000000 x0 : ffff06378123a480
[ 4.260724] Call trace:
[ 4.263172] __device_attach+0x3c/0x1bc
[ 4.267020] device_attach+0x14/0x20
[ 4.270606] xpcs_create+0x24/0x384
[ 4.274107] xpcs_create_byaddr+0x74/0xa0
[ 4.278129] sja1105_mdiobus_register+0xf8/0x478
[ 4.282763] sja1105_setup+0xb4/0x1194
[ 4.286524] dsa_register_switch+0xab0/0x11f8
[ 4.290895] sja1105_probe+0x2bc/0x2e4
[ 4.294654] spi_probe+0xa4/0xc4
[ 4.297890] really_probe+0x16c/0x3fc
[ 4.301564] __driver_probe_device+0xa4/0x168
[ 4.305935] driver_probe_device+0x3c/0x220
[ 4.310131] __device_attach_driver+0x128/0x1cc
[ 4.314676] bus_for_each_drv+0xf4/0x14c
[ 4.318610] __device_attach+0xfc/0x1bc
[ 4.322457] device_initial_probe+0x14/0x20
[ 4.326654] bus_probe_device+0x94/0x100
[ 4.330587] deferred_probe_work_func+0xa0/0xfc
[ 4.335132] process_scheduled_works+0x210/0x318
[ 4.339764] worker_thread+0x28c/0x450
[ 4.343523] kthread+0xfc/0x184
[ 4.346669] ret_from_fork+0x10/0x20
[ 4.350256] Code: 2a0103f6 f81f83a8 9431ccd8 f9402688 (39434109)
[ 4.356366] ---[ end trace 0000000000000000 ]---
I haven't looked at the code at all, but disassembling drivers/base/dd.lst,
I think the NPD is at dev->p->dead (0xa68 + 0x3c = 0xaa4).
0000000000000a68 <__device_attach>:
; {
a68: d503233f paciasp
a6c: d10143ff sub sp, sp, #0x50
a70: a9027bfd stp x29, x30, [sp, #0x20]
a74: a90357f6 stp x22, x21, [sp, #0x30]
a78: a9044ff4 stp x20, x19, [sp, #0x40]
a7c: 910083fd add x29, sp, #0x20
a80: d5384108 mrs x8, SP_EL0
; mutex_lock(&dev->mutex);
a84: 91020013 add x19, x0, #0x80
a88: f9423508 ldr x8, [x8, #0x468]
a8c: aa0003f4 mov x20, x0
a90: aa1303e0 mov x0, x19
a94: 2a0103f6 mov w22, w1
a98: f81f83a8 stur x8, [x29, #-0x8]
a9c: 94000000 bl 0xa9c <__device_attach+0x34>
0000000000000a9c: R_AARCH64_CALL26 mutex_lock
; if (dev->p->dead) {
aa0: f9402688 ldr x8, [x20, #0x48]
aa4: 39434109 ldrb w9, [x8, #0xd0]
aa8: 37000129 tbnz w9, #0x0, 0xacc <__device_attach+0x64>
; } else if (dev->driver) {
aac: f9403689 ldr x9, [x20, #0x68]
ab0: b40003e9 cbz x9, 0xb2c <__device_attach+0xc4>
; return dev->p && klist_node_attached(&dev->p->knode_driver);
ab4: b40002a8 cbz x8, 0xb08 <__device_attach+0xa0>
ab8: 91012100 add x0, x8, #0x48
abc: 94000000 bl 0xabc <__device_attach+0x54>
0000000000000abc: R_AARCH64_CALL26 klist_node_attached
; if (device_is_bound(dev)) {
ac0: 34000240 cbz w0, 0xb08 <__device_attach+0xa0>
ac4: 52800035 mov w21, #0x1
ac8: 14000002 b 0xad0 <__device_attach+0x68>
acc: 2a1f03f5 mov w21, wzr
; mutex_unlock(&dev->mutex);
ad0: aa1303e0 mov x0, x19
ad4: 94000000 bl 0xad4 <__device_attach+0x6c>
0000000000000ad4: R_AARCH64_CALL26 mutex_unlock
ad8: d5384108 mrs x8, SP_EL0
adc: f9423508 ldr x8, [x8, #0x468]
ae0: f85f83a9 ldur x9, [x29, #-0x8]
ae4: eb09011f cmp x8, x9
ae8: 540008c1 b.ne 0xc00 <__device_attach+0x198>
; return ret;
aec: 2a1503e0 mov w0, w21
af0: a9444ff4 ldp x20, x19, [sp, #0x40]
af4: a94357f6 ldp x22, x21, [sp, #0x30]
af8: a9427bfd ldp x29, x30, [sp, #0x20]
afc: 910143ff add sp, sp, #0x50
b00: d50323bf autiasp
b04: d65f03c0 ret
; ret = driver_sysfs_add(dev);
b08: aa1403e0 mov x0, x20
b0c: 97ffff21 bl 0x790 <driver_sysfs_add>
; if (!ret) {
b10: 340006c0 cbz w0, 0xbe8 <__device_attach+0x180>
; bus_notify(dev, BUS_NOTIFY_DRIVER_NOT_BOUND);
b14: aa1403e0 mov x0, x20
b18: 528000e1 mov w1, #0x7
b1c: 94000000 bl 0xb1c <__device_attach+0xb4>
0000000000000b1c: R_AARCH64_CALL26 bus_notify
b20: 2a1f03f5 mov w21, wzr
; dev->driver = NULL;
b24: f900369f str xzr, [x20, #0x68]
b28: 17ffffea b 0xad0 <__device_attach+0x68>
b2c: 120002c8 and w8, w22, #0x1
; if (dev->parent)
b30: f9402280 ldr x0, [x20, #0x40]
; struct device_attach_data data = {
b34: a900fff4 stp x20, xzr, [sp, #0x8]
b38: 39004bff strb wzr, [sp, #0x12]
b3c: 390043e8 strb w8, [sp, #0x10]
; if (dev->parent)
b40: b4000060 cbz x0, 0xb4c <__device_attach+0xe4>
; return __pm_runtime_resume(dev, RPM_GET_PUT);
b44: 52800081 mov w1, #0x4
b48: 94000000 bl 0xb48 <__device_attach+0xe0>
0000000000000b48: R_AARCH64_CALL26 __pm_runtime_resume
; ret = bus_for_each_drv(dev->bus, NULL, &data,
b4c: f9403280 ldr x0, [x20, #0x60]
b50: 90000003 adrp x3, 0x0 <driver_deferred_probe_add>
0000000000000b50: R_AARCH64_ADR_PREL_PG_HI21 .text+0x17ac
b54: 91000063 add x3, x3, #0x0
0000000000000b54: R_AARCH64_ADD_ABS_LO12_NC .text+0x17ac
b58: 910023e2 add x2, sp, #0x8
b5c: aa1f03e1 mov x1, xzr
b60: 94000000 bl 0xb60 <__device_attach+0xf8>
0000000000000b60: R_AARCH64_CALL26 bus_for_each_drv
b64: 39404be8 ldrb w8, [sp, #0x12]
; if (!ret && allow_async && data.have_async) {
b68: 7100001f cmp w0, #0x0
b6c: 1a9f07e9 cset w9, ne
; ret = bus_for_each_drv(dev->bus, NULL, &data,
b70: 2a0003f5 mov w21, w0
b74: 7100011f cmp w8, #0x0
; if (!ret && allow_async && data.have_async) {
b78: 520002c8 eor w8, w22, #0x1
b7c: 1a9f17ea cset w10, eq
b80: 2a0a0108 orr w8, w8, w10
b84: 2a080136 orr w22, w9, w8
b88: 360000f6 tbz w22, #0x0, 0xba4 <__device_attach+0x13c>
; return __pm_runtime_idle(dev, RPM_ASYNC);
b8c: aa1403e0 mov x0, x20
b90: 52800021 mov w1, #0x1
b94: 94000000 bl 0xb94 <__device_attach+0x12c>
0000000000000b94: R_AARCH64_CALL26 __pm_runtime_idle
; if (dev->parent)
b98: f9402280 ldr x0, [x20, #0x40]
b9c: b50000e0 cbnz x0, 0xbb8 <__device_attach+0x150>
ba0: 14000008 b 0xbc0 <__device_attach+0x158>
; asm_volatile_goto(
ba4: d503201f nop
Powered by blists - more mailing lists