linux-kernel - Re: [PATCH 2/3] arm64: dts: qcom: qrb5165-rb5: add a pin function for BT enable GPIO

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <ZW8Mjp9whA9rxam9@hovoldconsulting.com>
Date:   Tue, 5 Dec 2023 12:42:06 +0100
From:   Johan Hovold <johan@...nel.org>
To:     Bartosz Golaszewski <brgl@...ev.pl>
Cc:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
        Alex Elder <elder@...aro.org>,
        Srini Kandagatla <srinivas.kandagatla@...aro.org>,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org,
        Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: Re: [PATCH 2/3] arm64: dts: qcom: qrb5165-rb5: add a pin function
 for BT enable GPIO

On Tue, Dec 05, 2023 at 12:23:10PM +0100, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
> 
> Set up the pin function for the Bluetooth enable GPIO.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
> ---
>  arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> index ce6ae0771d34..ead0c45ba60c 100644
> --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> @@ -1264,6 +1264,17 @@ &tlmm {
>  		"HST_WLAN_UART_TX",
>  		"HST_WLAN_UART_RX";
>  
> +	bt_en_state: bt-default-state {
> +		bt-en {
> +			pins = "gpio21";
> +			function = "gpio";
> +
> +			drive-strength = <16>;
> +			output-low;
> +			bias-pull-up;
> +		};
> +	};
> +
>  	lt9611_irq_pin: lt9611-irq-state {
>  		pins = "gpio63";
>  		function = "gpio";

This makes no sense as a separate patch and should be squashed with the
final patch enabling bluetooth. Same for the first patch.

Johan