[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231206155903.566194-5-Frank.Li@nxp.com>
Date: Wed, 6 Dec 2023 10:58:58 -0500
From: Frank Li <Frank.Li@....com>
To: imx@...ts.linux.dev, Richard Zhu <hongxing.zhu@....com>,
Lucas Stach <l.stach@...gutronix.de>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof WilczyĆski <kw@...ux.com>,
Rob Herring <robh@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
linux-pci@...r.kernel.org (open list:PCI DRIVER FOR IMX6),
linux-arm-kernel@...ts.infradead.org (moderated list:PCI DRIVER FOR
IMX6),
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
DEVICE TREE BINDINGS), linux-kernel@...r.kernel.org (open list)
Subject: [PATCH 4/9] PCI: imx6: Using "linux,pci-domain" as slot ID
Avoid use get slot id by compared with register physical address. If there
are more than 2 slots, compared logic will become complex.
Signed-off-by: Frank Li <Frank.Li@....com>
---
drivers/pci/controller/dwc/pci-imx6.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 62d77fabd82a..239ef439ba70 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -33,6 +33,7 @@
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
+#include "../../pci.h"
#include "pcie-designware.h"
#define IMX8MQ_GPR_PCIE_REF_USE_PAD BIT(9)
@@ -1333,6 +1334,11 @@ static int imx6_pcie_probe(struct platform_device *pdev)
"Failed to get PCIEPHY reset control\n");
}
+ /* Using linux,pci-domain as PCI slot id */
+ imx6_pcie->controller_id = of_get_pci_domain_nr(node);
+ if (imx6_pcie->controller_id)
+ imx6_pcie->controller_id = 0;
+
switch (imx6_pcie->drvdata->variant) {
case IMX7D:
if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
--
2.34.1
Powered by blists - more mailing lists