lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231206030125.GN236001@dragon>
Date:   Wed, 6 Dec 2023 11:01:25 +0800
From:   Shawn Guo <shawnguo@...nel.org>
To:     Frieder Schrempf <frieder@...s.de>
Cc:     Conor Dooley <conor+dt@...nel.org>, devicetree@...r.kernel.org,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Rob Herring <robh+dt@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Frieder Schrempf <frieder.schrempf@...tron.de>,
        Fabio Estevam <festevam@...il.com>,
        NXP Linux Team <linux-imx@....com>,
        Pengutronix Kernel Team <kernel@...gutronix.de>
Subject: Re: [PATCH v2 14/14] arm64: dts: imx8mm-kontron: Refactor devicetree
 for OSM-S module and board

On Thu, Nov 30, 2023 at 05:16:14PM +0100, Frieder Schrempf wrote:
> From: Frieder Schrempf <frieder.schrempf@...tron.de>
> 
> The OSM spec defines dedicated functions for all pads of the SoM.
> Therefore we can assume that carrier board designs stick to these
> definitions and extend the SoM devicetree include with matching
> default nodes and pinmux settings.
> 
> This way we can reduce the overhead and redundancy in the carrier
> board devicetrees while still sticking to the policy of separating
> board and module description.
> 
> Even if the carrier board design deviates slightly from the spec it
> can define its own pinmux definitions and use them as necessary or
> even disable unused nodes from the SoM devicetree.
> 
> Signed-off-by: Frieder Schrempf <frieder.schrempf@...tron.de>
> ---
> Changes for v2:
> * none
> ---
>  .../dts/freescale/imx8mm-kontron-bl-osm-s.dts | 269 +++------
>  .../dts/freescale/imx8mm-kontron-osm-s.dtsi   | 552 +++++++++++++++++-
>  2 files changed, 616 insertions(+), 205 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
> index 12f786a72fbd5..efadfdff00af1 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
> @@ -25,8 +25,6 @@ osc_can: clock-osc-can {
>  
>  	leds {
>  		compatible = "gpio-leds";
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&pinctrl_gpio_led>;
>  
>  		led1 {
>  			label = "led1";
> @@ -52,24 +50,12 @@ pwm-beeper {
>  
>  	reg_rst_eth2: regulator-rst-eth2 {
>  		compatible = "regulator-fixed";
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&pinctrl_usb_eth2>;
>  		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
>  		enable-active-high;
>  		regulator-always-on;
>  		regulator-name = "rst-usb-eth2";
>  	};
>  
> -	reg_usb1_vbus: regulator-usb1-vbus {
> -		compatible = "regulator-fixed";
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&pinctrl_reg_usb1_vbus>;
> -		gpio = <&gpio3 25 GPIO_ACTIVE_LOW>;
> -		regulator-min-microvolt = <5000000>;
> -		regulator-max-microvolt = <5000000>;
> -		regulator-name = "usb1-vbus";
> -	};
> -
>  	reg_vdd_5v: regulator-5v {
>  		compatible = "regulator-fixed";
>  		regulator-always-on;
> @@ -80,9 +66,6 @@ reg_vdd_5v: regulator-5v {
>  };
>  
>  &ecspi2 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&pinctrl_ecspi2>;
> -	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
>  	status = "okay";
>  
>  	can@0 {
> @@ -103,9 +86,6 @@ can@0 {
>  };
>  
>  &ecspi3 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&pinctrl_ecspi3>;
> -	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
>  	status = "okay";
>  
>  	eeram@0 {
> @@ -117,7 +97,7 @@ eeram@0 {
>  
>  &fec1 {
>  	pinctrl-names = "default";
> -	pinctrl-0 = <&pinctrl_enet>;
> +	pinctrl-0 = <&pinctrl_enet_rgmii>;
>  	phy-connection-type = "rgmii-id";
>  	phy-handle = <&ethphy>;
>  	status = "okay";
> @@ -136,27 +116,59 @@ ethphy: ethernet-phy@0 {
>  	};
>  };
>  
> +/*
> + * Rename SoM signals according to board usage:
> + *   GPIO_B_0      -> DIO1_OUT
> + *   GPIO_B_1      -> DIO2_OUT
> + */
>  &gpio1 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&pinctrl_gpio1>;
> -	gpio-line-names = "", "", "", "dio1-out", "", "", "dio1-in", "dio2-out",
> -			  "dio2-in", "dio3-out", "dio3-in", "dio4-out", "", "", "", "",
> -			  "", "", "", "", "", "", "", "",
> -			  "", "", "", "", "", "", "", "";
> +	gpio-line-names = "", "GPIO_A_0", "", "GPIO_A_1",
> +			  "", "GPIO_A_2", "GPIO_A_3", "GPIO_A_4",
> +			  "GPIO_A_5", "GPIO_A_6", "GPIO_A_7", "DIO1_OUT",
> +			  "DIO2_OUT", "USB_A_OC#", "CAM_MCK", "USB_B_OC#",
> +			  "ETH_MDC", "ETH_MDIO", "ETH_A_(S)(R)(G)MII_TXD3",
> +			  "ETH_A_(S)(R)(G)MII_TXD2", "ETH_A_(S)(R)(G)MII_TXD1",
> +			  "ETH_A_(S)(R)(G)MII_TXD0", "ETH_A_(R)(G)MII_TX_EN(_ER)",
> +			  "ETH_A_(R)(G)MII_TX_CLK", "ETH_A_(R)(G)MII_RX_DV(_ER)",
> +			  "ETH_A_(R)(G)MII_RX_CLK", "ETH_A_(S)(R)(G)MII_RXD0",
> +			  "ETH_A_(S)(R)(G)MII_RXD1", "ETH_A_(R)(G)MII_RXD2",
> +			  "ETH_A_(R)(G)MII_RXD3";
>  };
>  
> -&gpio5 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&pinctrl_gpio5>;
> -	gpio-line-names = "", "", "dio4-in", "", "", "", "", "",
> -			  "", "", "", "", "", "", "", "",
> -			  "", "", "", "", "", "", "", "",
> -			  "", "", "", "", "", "", "", "";
> +/*
> + * Rename SoM signals according to board usage:
> + *   GPIO_B_2      -> DIO3_OUT
> + *   GPIO_B_3      -> DIO4_OUT
> + */
> +&gpio3 {
> +	gpio-line-names = "GPIO_C_5", "GPIO_C_4", "SDIO_B_CD#", "SDIO_B_D5",
> +			  "SDIO_B_D6", "SDIO_B_D7", "GPIO_C_0", "GPIO_C_1",
> +			  "GPIO_C_2", "GPIO_C_3", "SDIO_B_D0", "SDIO_B_D1",
> +			  "SDIO_B_D2", "SDIO_B_D3", "", "SDIO_B_D4",
> +			  "CARRIER_PWR_EN", "SDIO_B_CLK", "SDIO_B_CMD", "DIO3_OUT",
> +			  "USB_B_EN", "DIO4_OUT", "PCIe_CLKREQ#", "PCIe_A_PERST#",
> +			  "PCIe_WAKE#", "USB_A_EN";
> +};
> +
> +/*
> + * Rename SoM signals according to board usage:
> + *   GPIO_B_4      -> DIO1_IN
> + *   GPIO_B_5      -> DIO2_IN
> + *   GPIO_B_6      -> DIO3_IN
> + *   GPIO_B_7      -> DIO4_IN
> + */
> +&gpio4 {
> +	gpio-line-names = "GPIO_C_7", "", "I2S_A_DATA_IN", "I2S_B_DATA_IN",
> +			  "DIO1_IN", "BOOT_SEL0#", "BOOT_SEL1#", "",
> +			  "", "", "I2S_LRCLK", "I2S_BITCLK",
> +			  "I2S_A_DATA_OUT", "I2S_B_DATA_OUT", "DIO2_IN", "DIO3_IN",
> +			  "DIO4_IN", "SPI_A_/WP_(IO2)", "SPI_A_/HOLD_(IO3)", "GPIO_C_6",
> +			  "I2S_MCLK", "UART_A_TX", "UART_A_RX", "UART_A_CTS",
> +			  "UART_A_RTS", "", "", "",
> +			  "PCIe_SM_ALERT", "UART_B_RTS", "UART_B_CTS", "UART_B_RX";
>  };
>  
>  &i2c3 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&pinctrl_i2c3>;
>  	status = "okay";
>  
>  	usb-hub@2c {
> @@ -169,27 +181,28 @@ usb-hub@2c {
>  	};
>  };
>  
> -&i2c4 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&pinctrl_i2c4>;
> -};
> -
>  &pwm2 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&pinctrl_pwm2>;
>  	status = "okay";
>  };
>  
> +&reg_usb2_vbus {
> +	status = "disabled";
> +};
> +
> +&reg_usdhc2_vcc {
> +	status = "disabled";
> +};
> +
> +&reg_usdhc3_vcc {
> +	status = "disabled";
> +};
> +
>  &uart1 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&pinctrl_uart1>;
>  	uart-has-rtscts;
>  	status = "okay";
>  };
>  
>  &uart2 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&pinctrl_uart2>;
>  	linux,rs485-enabled-at-boot-time;
>  	uart-has-rtscts;
>  	status = "okay";
> @@ -197,8 +210,6 @@ &uart2 {
>  
>  &usbotg1 {
>  	dr_mode = "otg";
> -	disable-over-current;
> -	vbus-supply = <&reg_usb1_vbus>;
>  	status = "okay";
>  };
>  
> @@ -209,6 +220,9 @@ &usbotg2 {
>  	#size-cells = <0>;
>  	status = "okay";
>  
> +	/* VBUS is controlled by the hub */
> +	/delete-property/ vbus-supply;
> +
>  	usb1@1 {
>  		compatible = "usb424,2514";
>  		reg = <1>;
> @@ -224,171 +238,20 @@ usbnet: ethernet@1 {
>  };
>  
>  &usdhc2 {
> -	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> -	pinctrl-0 = <&pinctrl_usdhc2>;
> -	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
> -	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
>  	vmmc-supply = <&reg_vdd_3v3>;
> -	vqmmc-supply = <&reg_nvcc_sd>;
> -	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
>  	status = "okay";
>  };
>  
>  &iomuxc {
>  	pinctrl_can: cangrp {
>  		fsl,pins = <
> -			MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1			0x19
> -		>;
> -	};
> -
> -	pinctrl_ecspi2: ecspi2grp {
> -		fsl,pins = <
> -			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
> -			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
> -			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
> -			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x19
> -		>;
> -	};
> -
> -	pinctrl_ecspi3: ecspi3grp {
> -		fsl,pins = <
> -			MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO		0x82
> -			MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI		0x82
> -			MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK		0x82
> -			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x19
> -		>;
> -	};
> -
> -	pinctrl_enet: enetgrp {
> -		fsl,pins = <
> -			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
> -			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
> -			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
> -			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
> -			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
> -			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
> -			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
> -			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
> -			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
> -			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
> -			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
> -			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
> -			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
> -			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
> -			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19 /* PHY RST */
> -		>;
> -	};
> -
> -	pinctrl_gpio_led: gpioledgrp {
> -		fsl,pins = <
> -			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x19
> -			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
> -			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x19
> -		>;
> -	};
> -
> -	pinctrl_gpio1: gpio1grp {
> -		fsl,pins = <
> -			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x19
> -			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
> -			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19
> -			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
> -			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19
> -		>;
> -	};
> -
> -	pinctrl_gpio5: gpio5grp {
> -		fsl,pins = <
> -			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19
> -		>;
> -	};
> -
> -	pinctrl_i2c3: i2c3grp {
> -		fsl,pins = <
> -			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x40000083
> -			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x40000083
> -		>;
> -	};
> -
> -	pinctrl_i2c4: i2c4grp {
> -		fsl,pins = <
> -			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000083
> -			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000083
> -		>;
> -	};
> -
> -	pinctrl_pwm2: pwm2grp {
> -		fsl,pins = <
> -			MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT			0x19
> -		>;
> -	};
> -
> -	pinctrl_reg_usb1_vbus: regusb1vbusgrp {
> -		fsl,pins = <
> -			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x19
> -		>;
> -	};
> -
> -	pinctrl_uart1: uart1grp {
> -		fsl,pins = <
> -			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x0
> -			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x0
> -			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x0
> -			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x0
> -		>;
> -	};
> -
> -	pinctrl_uart2: uart2grp {
> -		fsl,pins = <
> -			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x0
> -			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x0
> -			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x0
> -			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x0
> -		>;
> -	};
> -
> -	pinctrl_usb_eth2: usbeth2grp {
> -		fsl,pins = <
> -			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x19
> -		>;
> -	};
> -
> -	pinctrl_usdhc2: usdhc2grp {
> -		fsl,pins = <
> -			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x90
> -			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
> -			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
> -			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
> -			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
> -			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
> -			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
> -			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x90
> -		>;
> -	};
> -
> -	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
> -		fsl,pins = <
> -			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x94
> -			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
> -			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
> -			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
> -			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
> -			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
> -			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
> -			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x90
> +			MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1			0x19  /* SDIO_B_PWR_EN */
>  		>;
>  	};
>  
> -	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
> +	pinctrl_usb_hub: usbhubgrp {
>  		fsl,pins = <
> -			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x96
> -			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
> -			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
> -			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
> -			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
> -			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
> -			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
> -			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x90
> +			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19 /* SDIO_B_WP */
>  		>;
>  	};
>  };
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
> index 6b9058fc53332..1a5c29565e7fe 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
> @@ -3,6 +3,7 @@
>   * Copyright (C) 2022 Kontron Electronics GmbH
>   */
>  
> +#include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include "imx8mm.dtsi"
>  
> @@ -28,6 +29,73 @@ memory@...00000 {
>  	chosen {
>  		stdout-path = &uart3;
>  	};
> +
> +	reg_vdd_carrier: regulator-vdd-carrier {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_reg_vdd_carrier>;
> +		enable-active-high;
> +		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;

Can we flip the order of these two properties? enable-active-high is a
further description to GPIO_ACTIVE_HIGH.

Shawn

> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-name = "VDD_CARRIER";
> +
> +		regulator-state-standby {
> +			regulator-on-in-suspend;
> +		};
> +
> +		regulator-state-mem {
> +			regulator-off-in-suspend;
> +		};
> +
> +		regulator-state-disk {
> +			regulator-off-in-suspend;
> +		};
> +	};
> +
> +	reg_usb1_vbus: regulator-usb1-vbus {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_reg_usb1_vbus>;
> +		enable-active-high;
> +		gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-name = "VBUS_USB1";
> +	};
> +
> +	reg_usb2_vbus: regulator-usb2-vbus {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_reg_usb2_vbus>;
> +		enable-active-high;
> +		gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-name = "VBUS_USB2";
> +	};
> +
> +	reg_usdhc2_vcc: regulator-usdhc2-vcc {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_reg_usdhc2_vcc>;
> +		enable-active-high;
> +		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-name = "VCC_SDIO_A";
> +	};
> +
> +	reg_usdhc3_vcc: regulator-usdhc3-vcc {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_reg_usdhc3_vcc>;
> +		enable-active-high;
> +		gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-name = "VCC_SDIO_B";
> +	};
>  };
>  
>  &A53_0 {
> @@ -96,6 +164,79 @@ partition@...000 {
>  	};
>  };
>  
> +&ecspi2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi2>, <&pinctrl_ecspi2_gpio>;
> +	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
> +};
> +
> +&ecspi3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi3>;
> +	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
> +};
> +
> +&gpio1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_gpio1>;
> +	gpio-line-names = "", "GPIO_A_0", "", "GPIO_A_1",
> +			  "", "GPIO_A_2", "GPIO_A_3", "GPIO_A_4",
> +			  "GPIO_A_5", "GPIO_A_6", "GPIO_A_7", "GPIO_B_0",
> +			  "GPIO_B_1", "USB_A_OC#", "CAM_MCK", "USB_B_OC#",
> +			  "ETH_MDC", "ETH_MDIO", "ETH_A_(S)(R)(G)MII_TXD3",
> +			  "ETH_A_(S)(R)(G)MII_TXD2", "ETH_A_(S)(R)(G)MII_TXD1",
> +			  "ETH_A_(S)(R)(G)MII_TXD0", "ETH_A_(R)(G)MII_TX_EN(_ER)",
> +			  "ETH_A_(R)(G)MII_TX_CLK", "ETH_A_(R)(G)MII_RX_DV(_ER)",
> +			  "ETH_A_(R)(G)MII_RX_CLK", "ETH_A_(S)(R)(G)MII_RXD0",
> +			  "ETH_A_(S)(R)(G)MII_RXD1", "ETH_A_(R)(G)MII_RXD2",
> +			  "ETH_A_(R)(G)MII_RXD3";
> +};
> +
> +&gpio2 {
> +	gpio-line-names = "", "", "", "",
> +			  "", "", "", "",
> +			  "", "", "", "",
> +			  "SDIO_A_CD#", "SDIO_A_CLK", "SDIO_A_CMD", "SDIO_A_D0",
> +			  "SDIO_A_D1", "SDIO_A_D2", "SDIO_A_D3", "SDIO_A_PWR_EN",
> +			  "SDIO_A_WP";
> +};
> +
> +&gpio3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_gpio3>;
> +	gpio-line-names = "GPIO_C_5", "GPIO_C_4", "SDIO_B_CD#", "SDIO_B_D5",
> +			  "SDIO_B_D6", "SDIO_B_D7", "GPIO_C_0", "GPIO_C_1",
> +			  "GPIO_C_2", "GPIO_C_3", "SDIO_B_D0", "SDIO_B_D1",
> +			  "SDIO_B_D2", "SDIO_B_D3", "", "SDIO_B_D4",
> +			  "CARRIER_PWR_EN", "SDIO_B_CLK", "SDIO_B_CMD", "GPIO_B_2",
> +			  "USB_B_EN", "GPIO_B_3", "PCIe_CLKREQ#", "PCIe_A_PERST#",
> +			  "PCIe_WAKE#", "USB_A_EN";
> +};
> +
> +&gpio4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_gpio4>;
> +	gpio-line-names = "GPIO_C_7", "", "I2S_A_DATA_IN", "I2S_B_DATA_IN",
> +			  "GPIO_B_4", "BOOT_SEL0#", "BOOT_SEL1#", "",
> +			  "", "", "I2S_LRCLK", "I2S_BITCLK",
> +			  "I2S_A_DATA_OUT", "I2S_B_DATA_OUT", "GPIO_B_5", "GPIO_B_6",
> +			  "GPIO_B_7", "SPI_A_/WP_(IO2)", "SPI_A_/HOLD_(IO3)", "GPIO_C_6",
> +			  "I2S_MCLK", "UART_A_TX", "UART_A_RX", "UART_A_CTS",
> +			  "UART_A_RTS", "", "", "",
> +			  "PCIe_SM_ALERT", "UART_B_RTS", "UART_B_CTS", "UART_B_RX";
> +};
> +
> +&gpio5 {
> +	gpio-line-names = "UART_B_TX", "SDIO_B_PWR_EN", "SDIO_B_WP", "PWM_2",
> +			  "PWM_1", "PWM_0", "", "",
> +			  "", "", "SPI_A_SCK", "SPI_A_SDO_(IO1)",
> +			  "SPI_A_SCK", "SPI_A_CS0#", "", "",
> +			  "I2C_A_SCL", "I2C_A_SDA", "I2C_B_SCL", "I2C_B_SDA",
> +			  "PCIe_SMCLK", "PCIe_SMDAT", "SPI_B_SCK", "SPI_B_SDO",
> +			  "SPI_B_SDI", "SPI_B_CS0#", "UART_CON_RX", "UART_CON_TX",
> +			  "UART_C_RX", "UART_C_TX";
> +};
> +
>  &i2c1 {
>  	clock-frequency = <400000>;
>  	pinctrl-names = "default";
> @@ -222,12 +363,69 @@ rv3028: rtc@52 {
>  	};
>  };
>  
> +&i2c2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +};
> +
> +&i2c3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c3>;
> +};
> +
> +&i2c4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c4>;
> +};
> +
> +&pwm1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm1>;
> +};
> +
> +&pwm2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm2>;
> +};
> +
> +&pwm3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm3>;
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2>;
> +};
> +
>  &uart3 { /* console */
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_uart3>;
>  	status = "okay";
>  };
>  
> +&uart4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart4>;
> +};
> +
> +&usbotg1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usb1>;
> +	vbus-supply = <&reg_usb1_vbus>;
> +};
> +
> +&usbotg2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usb2>;
> +	vbus-supply = <&reg_usb2_vbus>;
> +};
> +
>  &usdhc1 {
>  	pinctrl-names = "default", "state_100mhz", "state_200mhz";
>  	pinctrl-0 = <&pinctrl_usdhc1>;
> @@ -240,6 +438,26 @@ &usdhc1 {
>  	status = "okay";
>  };
>  
> +&usdhc2 {
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> +	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
> +	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
> +	vmmc-supply = <&reg_usdhc2_vcc>;
> +	vqmmc-supply = <&reg_nvcc_sd>;
> +	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> +};
> +
> +&usdhc3 {
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_gpio>;
> +	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_gpio>;
> +	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_gpio>;
> +	vmmc-supply = <&reg_usdhc3_vcc>;
> +	vqmmc-supply = <&reg_nvcc_sd>;
> +	cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
> +};
> +
>  &wdog1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_wdog>;
> @@ -248,6 +466,12 @@ &wdog1 {
>  };
>  
>  &iomuxc {
> +	pinctrl_csi_mck: csimckgrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1	0x59 /* CAM_MCK */
> +		>;
> +	};
> +
>  	pinctrl_ecspi1: ecspi1grp {
>  		fsl,pins = <
>  			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
> @@ -257,6 +481,106 @@ MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x19
>  		>;
>  	};
>  
> +	pinctrl_ecspi2: ecspi2grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82 /* SPI_A_SDI_(IO0) */
> +			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82 /* SPI_A_SDO_(IO1) */
> +			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82 /* SPI_A_SCK */
> +			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x19 /* SPI_A_CS0# */
> +		>;
> +	};
> +
> +	pinctrl_ecspi2_gpio: ecspi2gpiogrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17		0x19 /* SPI_A_/WP_(IO2) */
> +			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18		0x19 /* SPI_A_/HOLD_(IO3) */
> +		>;
> +	};
> +
> +	pinctrl_ecspi3: ecspi3grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO		0x82 /* SPI_B_SDI */
> +			MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI		0x82 /* SPI_B_SDO */
> +			MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK		0x82 /* SPI_B_SCK */
> +			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x19 /* SPI_B_CS0# */
> +		>;
> +	};
> +
> +	pinctrl_enet_rgmii: enetrgmiigrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x03 /* ETH_MDC */
> +			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x03 /* ETH_MDIO */
> +			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f /* ETH_A_(S)(R)(G)MII_TXD3 */
> +			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f /* ETH_A_(S)(R)(G)MII_TXD2 */
> +			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f /* ETH_A_(S)(R)(G)MII_TXD1 */
> +			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f /* ETH_A_(S)(R)(G)MII_TXD0 */
> +			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91 /* ETH_A_(R)(G)MII_RXD3 */
> +			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91 /* ETH_A_(R)(G)MII_RXD2 */
> +			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91 /* ETH_A_(S)(R)(G)MII_RXD1 */
> +			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91 /* ETH_A_(S)(R)(G)MII_RXD0 */
> +			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f /* ETH_A_(R)(G)MII_TX_CLK */
> +			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91 /* ETH_A_(R)(G)MII_RX_CLK */
> +			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91 /* ETH_A_(R)(G)MII_RX_DV(_ER) */
> +			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f /* ETH_A_(R)(G)MII_TX_EN(_ER) */
> +		>;
> +	};
> +
> +	pinctrl_enet_rmii: enetrmiigrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x03 /* ETH_MDC */
> +			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x03 /* ETH_MDIO */
> +			MX8MM_IOMUXC_ENET_TD2_ENET1_TX_CLK		0x4000001f /* ETH_A_(S)(R)(G)MII_TXD2 */
> +			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x56 /* ETH_A_(S)(R)(G)MII_TXD1 */
> +			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x56 /* ETH_A_(S)(R)(G)MII_TXD0 */
> +			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x56 /* ETH_A_(S)(R)(G)MII_RXD1 */
> +			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x56 /* ETH_A_(S)(R)(G)MII_RXD0 */
> +			MX8MM_IOMUXC_ENET_RXC_ENET1_RX_ER		0x56 /* ETH_A_(R)(G)MII_RX_CLK */
> +			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x56 /* ETH_A_(R)(G)MII_RX_DV(_ER) */
> +			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x56 /* ETH_A_(R)(G)MII_TX_EN(_ER) */
> +		>;
> +	};
> +
> +	pinctrl_gpio1: gpio1grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x19 /* GPIO_A_0 */
> +			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19 /* GPIO_A_1 */
> +			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x19 /* GPIO_A_2 */
> +			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19 /* GPIO_A_3 */
> +			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19 /* GPIO_A_4 */
> +			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x19 /* GPIO_A_5 */
> +			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19 /* GPIO_A_6 */
> +			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19 /* GPIO_A_7 */
> +			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19 /* GPIO_B_0 */
> +			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x19 /* GPIO_B_1 */
> +		>;
> +	};
> +
> +	pinctrl_gpio3: gpio3grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0			0x19 /* GPIO_C_5 */
> +			MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1		0x19 /* GPIO_C_4 */
> +			MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6		0x19 /* GPIO_C_0 */
> +			MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7		0x19 /* GPIO_C_1 */
> +			MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8		0x19 /* GPIO_C_2 */
> +			MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9		0x19 /* GPIO_C_3 */
> +			MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19		0x19 /* GPIO_B_2 */
> +			MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21		0x19 /* GPIO_B_3 */
> +		>;
> +	};
> +
> +	pinctrl_gpio4: gpio4grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0		0x19 /* GPIO_C_7 */
> +			MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4		0x19 /* GPIO_B_4 */
> +			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5		0x19 /* BOOT_SEL0# */
> +			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6		0x19 /* BOOT_SEL1# */
> +			MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14		0x19 /* GPIO_B_5 */
> +			MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15		0x19 /* GPIO_B_6 */
> +			MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16		0x19 /* GPIO_B_7 */
> +			MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x19 /* GPIO_C_6 */
> +		>;
> +	};
> +
>  	pinctrl_i2c1: i2c1grp {
>  		fsl,pins = <
>  			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000083
> @@ -264,22 +588,149 @@ MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000083
>  		>;
>  	};
>  
> +	pinctrl_i2c2: i2c2grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x40000083 /* I2C_A_SCL */
> +			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x40000083 /* I2C_A_SDA */
> +		>;
> +	};
> +
> +	pinctrl_i2c3: i2c3grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x40000083 /* I2C_B_SCL */
> +			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x40000083 /* I2C_B_SDA */
> +		>;
> +	};
> +
> +	pinctrl_i2c4: i2c4grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000083 /* PCIe_SMCLK and I2C_CAM_SCL/CSI_TX_P */
> +			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000083 /* PCIe_SMDAT and I2C_CAM_SDA/CSI_TX_N */
> +		>;
> +	};
> +
> +	pinctrl_pcie: pciegrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22		0x19 /* PCIe_CLKREQ# */
> +			MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23		0x19 /* PCIe_A_PERST# */
> +			MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24		0x19 /* PCIe_WAKE# */
> +			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x19 /* PCIe_SM_ALERT */
> +		>;
> +	};
> +
>  	pinctrl_pmic: pmicgrp {
>  		fsl,pins = <
>  			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x141
>  		>;
>  	};
>  
> +	pinctrl_pwm1: pwm1grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT		0x19 /* PWM_0 */
> +		>;
> +	};
> +
> +	pinctrl_pwm2: pwm2grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT			0x19 /* PWM_1 */
> +		>;
> +	};
> +
> +	pinctrl_pwm3: pwm3grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT			0x19 /* PWM_2 */
> +		>;
> +	};
> +
> +	pinctrl_reg_usb1_vbus: regusb1vbusgrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x19 /* USB_A_EN */
> +		>;
> +	};
> +
> +	pinctrl_reg_usb2_vbus: regusb2vbusgrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20		0x19 /* USB_B_EN */
> +		>;
> +	};
> +
> +	pinctrl_reg_usdhc2_vcc: regusdhc2vccgrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x19 /* SDIO_A_PWR_EN */
> +		>;
> +	};
> +
> +	pinctrl_reg_usdhc3_vcc: regusdhc3vccgrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1			0x19 /* SDIO_B_PWR_EN */
> +		>;
> +	};
> +
> +	pinctrl_reg_vdd_carrier: regvddcarriergrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16		0x19 /* CARRIER_PWR_EN */
> +		>;
> +	};
> +
>  	pinctrl_rtc: rtcgrp {
>  		fsl,pins = <
>  			MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1			0x19
>  		>;
>  	};
>  
> +	pinctrl_sai1: sai1grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0		0xd6 /* I2S_A_DATA_IN */
> +			MX8MM_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0		0xd6 /* I2S_A_DATA_OUT */
> +			MX8MM_IOMUXC_SAI1_RXD1_SAI1_RX_DATA1		0xd6 /* I2S_B_DATA_IN */
> +			MX8MM_IOMUXC_SAI1_TXD1_SAI1_TX_DATA1		0xd6 /* I2S_B_DATA_OUT */
> +			MX8MM_IOMUXC_SAI1_MCLK_SAI1_MCLK		0xd6 /* I2S_MCLK */
> +			MX8MM_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC		0xd6 /* I2S_LRCLK */
> +			MX8MM_IOMUXC_SAI1_TXC_SAI1_TX_BCLK		0xd6 /* I2S_BITCLK */
> +		>;
> +	};
> +
> +	pinctrl_uart1: uart1grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x0 /* UART_A_RX */
> +			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x0 /* UART_A_TX */
> +			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x0 /* UART_A_CTS */
> +			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x0 /* UART_A_RTS */
> +		>;
> +	};
> +
> +	pinctrl_uart2: uart2grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x0 /* UART_B_RX */
> +			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x0 /* UART_B_TX */
> +			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x0 /* UART_B_CTS */
> +			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x0 /* UART_B_RTS */
> +		>;
> +	};
> +
>  	pinctrl_uart3: uart3grp {
>  		fsl,pins = <
> -			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x140
> -			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x140
> +			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x140 /* UART_CON_RX */
> +			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x140 /* UART_CON_TX */
> +		>;
> +	};
> +
> +	pinctrl_uart4: uart4grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x0 /* UART_C_RX */
> +			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x0 /* UART_C_TX */
> +		>;
> +	};
> +
> +	pinctrl_usb1: usb1grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x19 /* USB_A_OC# */
> +		>;
> +	};
> +
> +	pinctrl_usb2: usb2grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC		0x19 /* USB_B_OC# */
>  		>;
>  	};
>  
> @@ -334,6 +785,103 @@ MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x196
>  		>;
>  	};
>  
> +	pinctrl_usdhc2: usdhc2grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x90 /* SDIO_A_CLK */
> +			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0 /* SDIO_A_CMD */
> +			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0 /* SDIO_A_D0 */
> +			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0 /* SDIO_A_D1 */
> +			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0 /* SDIO_A_D2 */
> +			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0 /* SDIO_A_D3 */
> +			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6 /* SDIO_A_WP */
> +			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x90
> +		>;
> +	};
> +
> +	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x94 /* SDIO_A_CLK */
> +			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4 /* SDIO_A_CMD */
> +			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4 /* SDIO_A_D0 */
> +			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4 /* SDIO_A_D1 */
> +			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4 /* SDIO_A_D2 */
> +			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4 /* SDIO_A_D3 */
> +			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6 /* SDIO_A_WP */
> +			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x90
> +		>;
> +	};
> +
> +	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x96 /* SDIO_A_CLK */
> +			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6 /* SDIO_A_CMD */
> +			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6 /* SDIO_A_D0 */
> +			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6 /* SDIO_A_D1 */
> +			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6 /* SDIO_A_D2 */
> +			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6 /* SDIO_A_D3 */
> +			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6 /* SDIO_A_WP */
> +			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x90
> +		>;
> +	};
> +
> +	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19 /* SDIO_A_CD# */
> +		>;
> +	};
> +
> +	pinctrl_usdhc3: usdhc3grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x90 /* SDIO_B_CLK */
> +			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x90 /* SDIO_B_CMD */
> +			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x90 /* SDIO_B_D0 */
> +			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x90 /* SDIO_B_D1 */
> +			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x90 /* SDIO_B_D2 */
> +			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x90 /* SDIO_B_D3 */
> +			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x90 /* SDIO_B_D4 */
> +			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x90 /* SDIO_B_D5 */
> +			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x90 /* SDIO_B_D6 */
> +			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x90 /* SDIO_B_D7 */
> +		>;
> +	};
> +
> +	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x94 /* SDIO_B_CLK */
> +			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x94 /* SDIO_B_CMD */
> +			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x94 /* SDIO_B_D0 */
> +			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x94 /* SDIO_B_D1 */
> +			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x94 /* SDIO_B_D2 */
> +			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x94 /* SDIO_B_D3 */
> +			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x94 /* SDIO_B_D4 */
> +			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x94 /* SDIO_B_D5 */
> +			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x94 /* SDIO_B_D6 */
> +			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x94 /* SDIO_B_D7 */
> +		>;
> +	};
> +
> +	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x96 /* SDIO_B_CLK */
> +			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x96 /* SDIO_B_CMD */
> +			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x96 /* SDIO_B_D0 */
> +			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x96 /* SDIO_B_D1 */
> +			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x96 /* SDIO_B_D2 */
> +			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x96 /* SDIO_B_D3 */
> +			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x96 /* SDIO_B_D4 */
> +			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x96 /* SDIO_B_D5 */
> +			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x96 /* SDIO_B_D6 */
> +			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x96 /* SDIO_B_D7 */
> +		>;
> +	};
> +
> +	pinctrl_usdhc3_gpio: usdhc3gpiogrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x19 /* SDIO_B_CD# */
> +			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19 /* SDIO_B_WP */
> +		>;
> +	};
> +
>  	pinctrl_wdog: wdoggrp {
>  		fsl,pins = <
>  			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
> -- 
> 2.43.0
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ