linux-kernel - Re: [PATCH v3 1/5] dt-bindings: arm: hwmon: gpio-fan: Convert txt bindings to yaml

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231206215016.GA3379159-robh@kernel.org>
Date:   Wed, 6 Dec 2023 15:50:16 -0600
From:   Rob Herring <robh@...nel.org>
To:     David Heidelberg <david@...t.cz>
Cc:     Jean Delvare <jdelvare@...e.com>,
        Guenter Roeck <linux@...ck-us.net>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        linux-hwmon@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 1/5] dt-bindings: arm: hwmon: gpio-fan: Convert txt
 bindings to yaml

On Sat, Dec 02, 2023 at 11:29:00PM +0100, David Heidelberg wrote:
> Convert fan devices connected to GPIOs to the YAML syntax.
> 
> Signed-off-by: David Heidelberg <david@...t.cz>
> ---
>  .../devicetree/bindings/hwmon/gpio-fan.txt    | 41 -----------
>  .../devicetree/bindings/hwmon/gpio-fan.yaml   | 70 +++++++++++++++++++
>  2 files changed, 70 insertions(+), 41 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/hwmon/gpio-fan.txt
>  create mode 100644 Documentation/devicetree/bindings/hwmon/gpio-fan.yaml
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
> deleted file mode 100644
> index f4cfa350f6a1..000000000000
> --- a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -Bindings for fan connected to GPIO lines
> -
> -Required properties:
> -- compatible : "gpio-fan"
> -
> -Optional properties:
> -- gpios: Specifies the pins that map to bits in the control value,
> -  ordered MSB-->LSB.
> -- gpio-fan,speed-map: A mapping of possible fan RPM speeds and the
> -  control value that should be set to achieve them. This array
> -  must have the RPM values in ascending order.
> -- alarm-gpios: This pin going active indicates something is wrong with
> -  the fan, and a udev event will be fired.
> -- #cooling-cells: If used as a cooling device, must be <2>
> -  Also see:
> -  Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
> -  min and max states are derived from the speed-map of the fan.
> -
> -Note: At least one the "gpios" or "alarm-gpios" properties must be set.
> -
> -Examples:
> -
> -	gpio_fan {
> -		compatible = "gpio-fan";
> -		gpios = <&gpio1 14 1
> -			 &gpio1 13 1>;
> -		gpio-fan,speed-map = <0    0
> -				      3000 1
> -				      6000 2>;
> -		alarm-gpios = <&gpio1 15 1>;
> -	};
> -	gpio_fan_cool: gpio_fan {
> -		compatible = "gpio-fan";
> -		gpios = <&gpio2 14 1
> -			 &gpio2 13 1>;
> -		gpio-fan,speed-map =	<0    0>,
> -					<3000 1>,
> -					<6000 2>;
> -		alarm-gpios = <&gpio2 15 1>;
> -		#cooling-cells = <2>; /* min followed by max */
> -	};
> diff --git a/Documentation/devicetree/bindings/hwmon/gpio-fan.yaml b/Documentation/devicetree/bindings/hwmon/gpio-fan.yaml
> new file mode 100644
> index 000000000000..0e220874bee6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/gpio-fan.yaml
> @@ -0,0 +1,70 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/hwmon/gpio-fan.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Fan connected to GPIO lines
> +
> +maintainers:
> +  - Rob Herring <robh@...nel.org>
> +
> +properties:
> +  compatible:
> +    const: gpio-fan
> +
> +  gpios:
> +    description: |
> +      Specifies the pins that map to bits in the control value,
> +      ordered MSB-->LSB.
> +    minItems: 1
> +    maxItems: 7
> +
> +  alarm-gpios:
> +    maxItems: 1
> +
> +  gpio-fan,speed-map:
> +    $ref: /schemas/types.yaml#/definitions/uint32-matrix
> +    minItems: 2
> +    maxItems: 127
> +    items:
> +      items:
> +        - description: fan speed in RPMs
> +        - description: control value
> +    description: |
> +      A mapping of possible fan RPM speeds and the
> +      control value that should be set to achieve them. This array
> +      must have the RPM values in ascending order.
> +
> +  '#cooling-cells':
> +    const: 2
> +
> +required:
> +  - compatible
> +  - gpios
> +  - gpio-fan,speed-map
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    gpio_fan {
> +      compatible = "gpio-fan";
> +      gpios = <&gpio1 14 1
> +               &gpio1 13 1>;
> +      gpio-fan,speed-map = <    0 0>,
> +                           < 3000 1>,
> +                           <36000 2>;
> +      alarm-gpios = <&gpio1 15 1>;
> +    };
> +  - |
> +    gpio_fan_cool: gpio_fan {

Drop unused labels.

> +      compatible = "gpio-fan";
> +      gpios = <&gpio2 14 1
> +               &gpio2 13 1>;
> +      gpio-fan,speed-map = <   0 0>,
> +                           <3000 1>,
> +                           <6000 2>;
> +      alarm-gpios = <&gpio2 15 1>;
> +      #cooling-cells = <2>; /* min followed by max */
> +    };

Not really much difference in the 2 examples. Drop the first one 
(having fewer properties).

Rob