[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231206-th1520_mmc_dts-v8-2-69220e373e8f@baylibre.com>
Date: Wed, 06 Dec 2023 00:09:22 -0800
From: Drew Fustini <dfustini@...libre.com>
To: Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>,
Jisheng Zhang <jszhang@...nel.org>,
Guo Ren <guoren@...nel.org>, Fu Wei <wefu@...hat.com>,
Conor Dooley <conor@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: Jason Kridner <jkridner@...gleboard.org>,
Robert Nelson <robertcnelson@...gleboard.org>,
linux-riscv@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, Drew Fustini <dfustini@...libre.com>
Subject: [PATCH v8 2/4] riscv: dts: thead: Add TH1520 mmc controllers and
sdhci clock
Add node for the fixed reference clock used for emmc and sdio nodes.
Add emmc node for the 1st dwcmshc instance which is typically connected
to an eMMC device. Add sdio0 node for the 2nd dwcmshc instance which is
typically connected to microSD slot. Add sdio1 node for the 3rd dwcmshc
instance which is typically connected to an SDIO WiFi module. The node
names are based on Table 1-2 C910/C906 memory map in the TH1520 System
User Manual.
Link: https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs
Signed-off-by: Drew Fustini <dfustini@...libre.com>
---
arch/riscv/boot/dts/thead/th1520.dtsi | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
index ba4d2c673ac8..8b915e206f3a 100644
--- a/arch/riscv/boot/dts/thead/th1520.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -146,6 +146,13 @@ uart_sclk: uart-sclk-clock {
#clock-cells = <0>;
};
+ sdhci_clk: sdhci-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <198000000>;
+ clock-output-names = "sdhci_clk";
+ #clock-cells = <0>;
+ };
+
soc {
compatible = "simple-bus";
interrupt-parent = <&plic>;
@@ -304,6 +311,33 @@ dmac0: dma-controller@...fc00000 {
status = "disabled";
};
+ emmc: mmc@...7080000 {
+ compatible = "thead,th1520-dwcmshc";
+ reg = <0xff 0xe7080000 0x0 0x10000>;
+ interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sdhci_clk>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
+ sdio0: mmc@...7090000 {
+ compatible = "thead,th1520-dwcmshc";
+ reg = <0xff 0xe7090000 0x0 0x10000>;
+ interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sdhci_clk>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
+ sdio1: mmc@...70a0000 {
+ compatible = "thead,th1520-dwcmshc";
+ reg = <0xff 0xe70a0000 0x0 0x10000>;
+ interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sdhci_clk>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
timer0: timer@...fc32000 {
compatible = "snps,dw-apb-timer";
reg = <0xff 0xefc32000 0x0 0x14>;
--
2.34.1
Powered by blists - more mailing lists