[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAJM55Z_jRhJLLQg9_OzJ_UeqaoqByu_BgxmwtVRUK2Z+qEKZxg@mail.gmail.com>
Date: Wed, 6 Dec 2023 04:10:28 -0600
From: Emil Renner Berthing <emil.renner.berthing@...onical.com>
To: Drew Fustini <dfustini@...libre.com>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>,
Jisheng Zhang <jszhang@...nel.org>,
Guo Ren <guoren@...nel.org>, Fu Wei <wefu@...hat.com>,
Conor Dooley <conor@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: Jason Kridner <jkridner@...gleboard.org>,
Robert Nelson <robertcnelson@...gleboard.org>,
linux-riscv@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH v8 2/4] riscv: dts: thead: Add TH1520 mmc controllers and
sdhci clock
Drew Fustini wrote:
> Add node for the fixed reference clock used for emmc and sdio nodes.
> Add emmc node for the 1st dwcmshc instance which is typically connected
> to an eMMC device. Add sdio0 node for the 2nd dwcmshc instance which is
> typically connected to microSD slot. Add sdio1 node for the 3rd dwcmshc
> instance which is typically connected to an SDIO WiFi module. The node
> names are based on Table 1-2 C910/C906 memory map in the TH1520 System
> User Manual.
>
> Link: https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs
> Signed-off-by: Drew Fustini <dfustini@...libre.com>
Thanks! The rest of the patches look good too, but I don't really have
a schematic
to do proper review.
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@...onical.com>
> ---
> arch/riscv/boot/dts/thead/th1520.dtsi | 34 ++++++++++++++++++++++++++++++++++
> 1 file changed, 34 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
> index ba4d2c673ac8..8b915e206f3a 100644
> --- a/arch/riscv/boot/dts/thead/th1520.dtsi
> +++ b/arch/riscv/boot/dts/thead/th1520.dtsi
> @@ -146,6 +146,13 @@ uart_sclk: uart-sclk-clock {
> #clock-cells = <0>;
> };
>
> + sdhci_clk: sdhci-clock {
> + compatible = "fixed-clock";
> + clock-frequency = <198000000>;
> + clock-output-names = "sdhci_clk";
> + #clock-cells = <0>;
> + };
> +
> soc {
> compatible = "simple-bus";
> interrupt-parent = <&plic>;
> @@ -304,6 +311,33 @@ dmac0: dma-controller@...fc00000 {
> status = "disabled";
> };
>
> + emmc: mmc@...7080000 {
> + compatible = "thead,th1520-dwcmshc";
> + reg = <0xff 0xe7080000 0x0 0x10000>;
> + interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&sdhci_clk>;
> + clock-names = "core";
> + status = "disabled";
> + };
> +
> + sdio0: mmc@...7090000 {
> + compatible = "thead,th1520-dwcmshc";
> + reg = <0xff 0xe7090000 0x0 0x10000>;
> + interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&sdhci_clk>;
> + clock-names = "core";
> + status = "disabled";
> + };
> +
> + sdio1: mmc@...70a0000 {
> + compatible = "thead,th1520-dwcmshc";
> + reg = <0xff 0xe70a0000 0x0 0x10000>;
> + interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&sdhci_clk>;
> + clock-names = "core";
> + status = "disabled";
> + };
> +
> timer0: timer@...fc32000 {
> compatible = "snps,dw-apb-timer";
> reg = <0xff 0xefc32000 0x0 0x14>;
>
> --
> 2.34.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
Powered by blists - more mailing lists