| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <94a1f9fc-82fb-4a04-a44b-f9b20c2bdfdd@starfivetech.com>
Date: Wed, 6 Dec 2023 20:02:55 +0800
From: Keith Zhao <keith.zhao@...rfivetech.com>
To: Maxime Ripard <mripard@...nel.org>
CC: "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-riscv@...ts.infradead.org" <linux-riscv@...ts.infradead.org>,
"tzimmermann@...e.de" <tzimmermann@...e.de>,
"airlied@...il.com" <airlied@...il.com>,
"krzysztof.kozlowski+dt@...aro.org"
<krzysztof.kozlowski+dt@...aro.org>,
William Qiu <william.qiu@...rfivetech.com>,
Xingyu Wu <xingyu.wu@...rfivetech.com>,
"paul.walmsley@...ive.com" <paul.walmsley@...ive.com>,
"aou@...s.berkeley.edu" <aou@...s.berkeley.edu>,
"palmer@...belt.com" <palmer@...belt.com>,
"p.zabel@...gutronix.de" <p.zabel@...gutronix.de>,
Shengyang Chen <shengyang.chen@...rfivetech.com>,
Jack Zhu <jack.zhu@...rfivetech.com>,
Changhuang Liang <changhuang.liang@...rfivetech.com>,
"maarten.lankhorst@...ux.intel.com"
<maarten.lankhorst@...ux.intel.com>,
"suijingfeng@...ngson.cn" <suijingfeng@...ngson.cn>
Subject: Re: [v3 5/6] drm/vs: Add hdmi driver
On 2023/12/6 17:04, Maxime Ripard wrote:
> On Mon, Dec 04, 2023 at 08:33:14PM +0800, Keith Zhao wrote:
>> add hdmi driver as encoder and connect
>>
>> Signed-off-by: Keith Zhao <keith.zhao@...rfivetech.com>
>> ---
>> drivers/gpu/drm/verisilicon/Kconfig | 8 +
>> drivers/gpu/drm/verisilicon/Makefile | 1 +
>> drivers/gpu/drm/verisilicon/starfive_hdmi.c | 849 ++++++++++++++++++++
>> drivers/gpu/drm/verisilicon/starfive_hdmi.h | 304 +++++++
>> drivers/gpu/drm/verisilicon/vs_drv.c | 3 +
>> drivers/gpu/drm/verisilicon/vs_drv.h | 4 +
>> 6 files changed, 1169 insertions(+)
>> create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.c
>> create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.h
>>
>> diff --git a/drivers/gpu/drm/verisilicon/Kconfig b/drivers/gpu/drm/verisilicon/Kconfig
>> index e10fa97635aa..122c786e3948 100644
>> --- a/drivers/gpu/drm/verisilicon/Kconfig
>> +++ b/drivers/gpu/drm/verisilicon/Kconfig
>> @@ -11,3 +11,11 @@ config DRM_VERISILICON
>> This driver provides VeriSilicon kernel mode
>> setting and buffer management. It does not
>> provide 2D or 3D acceleration.
>> +
>> +config DRM_VERISILICON_STARFIVE_HDMI
>> + bool "Starfive HDMI extensions"
>> + depends on DRM_VERISILICON
>> + help
>> + This selects support for StarFive soc specific extensions
>> + for the Innosilicon HDMI driver. If you want to enable
>> + HDMI on JH7110 based soc, you should select this option.
>
> I'm confused, is it a starfive or verisilicon IP?
it is Innosilicon ip ，I need describe it clearer in my next.
>
>> diff --git a/drivers/gpu/drm/verisilicon/Makefile b/drivers/gpu/drm/verisilicon/Makefile
>> index bf6f2b7ee480..71fadafcee13 100644
>> --- a/drivers/gpu/drm/verisilicon/Makefile
>> +++ b/drivers/gpu/drm/verisilicon/Makefile
>> @@ -6,4 +6,5 @@ vs_drm-objs := vs_dc_hw.o \
>> vs_drv.o \
>> vs_modeset.o \
>> vs_plane.o
>> +vs_drm-$(CONFIG_DRM_VERISILICON_STARFIVE_HDMI) += starfive_hdmi.o
>> obj-$(CONFIG_DRM_VERISILICON) += vs_drm.o
>> diff --git a/drivers/gpu/drm/verisilicon/starfive_hdmi.c b/drivers/gpu/drm/verisilicon/starfive_hdmi.c
>> new file mode 100644
>> index 000000000000..aa621db0dee0
>> --- /dev/null
>> +++ b/drivers/gpu/drm/verisilicon/starfive_hdmi.c
>> @@ -0,0 +1,849 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2023 StarFive Technology Co., Ltd.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/component.h>
>> +#include <linux/delay.h>
>> +#include <linux/err.h>
>> +#include <linux/hdmi.h>
>> +#include <linux/i2c.h>
>> +#include <linux/irq.h>
>> +#include <linux/media-bus-format.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/module.h>
>> +#include <linux/mutex.h>
>> +#include <linux/of_device.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/reset.h>
>> +
>> +#include <drm/bridge/dw_hdmi.h>
>> +#include <drm/drm_atomic_helper.h>
>> +#include <drm/drm_edid.h>
>> +#include <drm/drm_managed.h>
>> +#include <drm/drm_of.h>
>> +#include <drm/drm_probe_helper.h>
>> +#include <drm/drm_simple_kms_helper.h>
>> +
>> +#include "starfive_hdmi.h"
>> +#include "vs_drv.h"
>> +#include "vs_crtc.h"
>> +
>> +static const char * const hdmi_clocks[] = {
>> + "sysclk",
>> + "mclk",
>> + "bclk"
>> +};
>> +
>> +static struct starfive_hdmi_encoder *encoder_to_hdmi(struct drm_encoder *encoder)
>> +{
>> + return container_of(encoder, struct starfive_hdmi_encoder, encoder);
>> +}
>> +
>> +static struct starfive_hdmi *connector_to_hdmi(struct drm_connector *connector)
>> +{
>> + return container_of(connector, struct starfive_hdmi, connector);
>> +}
>> +
>> +static const struct post_pll_config post_pll_cfg_table[] = {
>> + {25200000, 1, 80, 13, 3, 1},
>> + {27000000, 1, 40, 11, 3, 1},
>> + {33750000, 1, 40, 11, 3, 1},
>> + {49000000, 1, 20, 1, 3, 3},
>> + {241700000, 1, 20, 1, 3, 3},
>> + {297000000, 4, 20, 0, 0, 3},
>> + {594000000, 4, 20, 0, 0, 0},
>
> If you don't support modes > 340MHz, then there's no point in listing 594MHz here
sure . max should be 297M here.
>
>> + { /* sentinel */ }
>> +};
>> +
>> +inline u8 hdmi_readb(struct starfive_hdmi *hdmi, u16 offset)
>> +{
>> + return readl_relaxed(hdmi->regs + (offset) * 0x04);
>> +}
>> +
>> +inline void hdmi_writeb(struct starfive_hdmi *hdmi, u16 offset, u32 val)
>> +{
>> + writel_relaxed(val, hdmi->regs + (offset) * 0x04);
>> +}
>> +
>> +inline void hdmi_writew(struct starfive_hdmi *hdmi, u16 offset, u32 val)
>> +{
>> + writew_relaxed(val & 0xFF, hdmi->regs + (offset) * 0x04);
>> + writew_relaxed((val >> 8) & 0xFF, hdmi->regs + (offset + 1) * 0x04);
>> +}
>> +
>> +inline void hdmi_modb(struct starfive_hdmi *hdmi, u16 offset,
>> + u32 msk, u32 val)
>> +{
>> + u8 temp = hdmi_readb(hdmi, offset) & ~msk;
>> +
>> + temp |= val & msk;
>> + hdmi_writeb(hdmi, offset, temp);
>> +}
>> +
>> +static int starfive_hdmi_enable_clk_deassert_rst(struct device *dev, struct starfive_hdmi *hdmi)
>> +{
>> + int ret;
>> +
>> + ret = clk_bulk_prepare_enable(hdmi->nclks, hdmi->clk_hdmi);
>> + if (ret) {
>> + dev_err(dev, "failed to enable clocks\n");
>> + return ret;
>> + }
>> +
>> + ret = reset_control_deassert(hdmi->tx_rst);
>> + if (ret < 0) {
>> + dev_err(dev, "failed to deassert tx_rst\n");
>> + return ret;
>> + }
>> + return 0;
>> +}
>> +
>> +static void starfive_hdmi_disable_clk_assert_rst(struct device *dev, struct starfive_hdmi *hdmi)
>> +{
>> + int ret;
>> +
>> + ret = reset_control_assert(hdmi->tx_rst);
>> + if (ret < 0)
>> + dev_err(dev, "failed to assert tx_rst\n");
>> +
>> + clk_bulk_disable_unprepare(hdmi->nclks, hdmi->clk_hdmi);
>> +}
>> +
>> +#ifdef CONFIG_PM_SLEEP
>> +static int hdmi_system_pm_suspend(struct device *dev)
>> +{
>> + return pm_runtime_force_suspend(dev);
>> +}
>> +
>> +static int hdmi_system_pm_resume(struct device *dev)
>> +{
>> + return pm_runtime_force_resume(dev);
>> +}
>> +#endif
>> +
>> +#ifdef CONFIG_PM
>> +static int hdmi_runtime_suspend(struct device *dev)
>> +{
>> + struct starfive_hdmi *hdmi = dev_get_drvdata(dev);
>> +
>> + starfive_hdmi_disable_clk_assert_rst(dev, hdmi);
>> +
>> + return 0;
>> +}
>> +
>> +static int hdmi_runtime_resume(struct device *dev)
>> +{
>> + struct starfive_hdmi *hdmi = dev_get_drvdata(dev);
>> +
>> + return starfive_hdmi_enable_clk_deassert_rst(dev, hdmi);
>> +}
>> +#endif
>> +
>> +static void starfive_hdmi_tx_phy_power_down(struct starfive_hdmi *hdmi)
>> +{
>> + hdmi_modb(hdmi, HDMI_SYS_CTRL, m_POWER, v_PWR_OFF);
>> +}
>> +
>> +static void starfive_hdmi_tx_phy_power_on(struct starfive_hdmi *hdmi)
>> +{
>> + hdmi_modb(hdmi, HDMI_SYS_CTRL, m_POWER, v_PWR_ON);
>> +}
>> +
>> +static void starfive_hdmi_config_pll(struct starfive_hdmi *hdmi)
>> +{
>> + u32 val;
>> + u8 reg_1ad_value = hdmi->post_cfg->post_div_en ?
>> + hdmi->post_cfg->postdiv : 0x00;
>> + u8 reg_1aa_value = hdmi->post_cfg->post_div_en ?
>> + 0x0e : 0x02;
>> +
>> + hdmi_writeb(hdmi, STARFIVE_PRE_PLL_CONTROL, STARFIVE_PRE_PLL_POWER_DOWN);
>> + hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_1,
>> + STARFIVE_POST_PLL_POST_DIV_ENABLE |
>> + STARFIVE_POST_PLL_REFCLK_SEL_TMDS |
>> + STARFIVE_POST_PLL_POWER_DOWN);
>> + hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_1, STARFIVE_PRE_PLL_PRE_DIV(hdmi->pre_cfg.prediv));
>> +
>> + val = STARFIVE_SPREAD_SPECTRUM_MOD_DISABLE | STARFIVE_SPREAD_SPECTRUM_MOD_DOWN;
>> + if (!hdmi->pre_cfg.fracdiv)
>> + val |= STARFIVE_PRE_PLL_FRAC_DIV_DISABLE;
>> + hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_2,
>> + STARFIVE_PRE_PLL_FB_DIV_11_8(hdmi->pre_cfg.fbdiv) | val);
>> + hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_3,
>> + STARFIVE_PRE_PLL_FB_DIV_7_0(hdmi->pre_cfg.fbdiv));
>> + hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_4,
>> + STARFIVE_PRE_PLL_TMDSCLK_DIV_C(hdmi->pre_cfg.tmds_div_c) |
>> + STARFIVE_PRE_PLL_TMDSCLK_DIV_A(hdmi->pre_cfg.tmds_div_a) |
>> + STARFIVE_PRE_PLL_TMDSCLK_DIV_B(hdmi->pre_cfg.tmds_div_b));
>> +
>> + if (hdmi->pre_cfg.fracdiv) {
>> + hdmi_writeb(hdmi, STARFIVE_PRE_PLL_FRAC_DIV_L,
>> + STARFIVE_PRE_PLL_FRAC_DIV_7_0(hdmi->pre_cfg.fracdiv));
>> + hdmi_writeb(hdmi, STARFIVE_PRE_PLL_FRAC_DIV_M,
>> + STARFIVE_PRE_PLL_FRAC_DIV_15_8(hdmi->pre_cfg.fracdiv));
>> + hdmi_writeb(hdmi, STARFIVE_PRE_PLL_FRAC_DIV_H,
>> + STARFIVE_PRE_PLL_FRAC_DIV_23_16(hdmi->pre_cfg.fracdiv));
>> + }
>> +
>> + hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_5,
>> + STARFIVE_PRE_PLL_PCLK_DIV_A(hdmi->pre_cfg.pclk_div_a) |
>> + STARFIVE_PRE_PLL_PCLK_DIV_B(hdmi->pre_cfg.pclk_div_b));
>> + hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_6,
>> + STARFIVE_PRE_PLL_PCLK_DIV_C(hdmi->pre_cfg.pclk_div_c) |
>> + STARFIVE_PRE_PLL_PCLK_DIV_D(hdmi->pre_cfg.pclk_div_d));
>> +
>> + /*pre-pll power down*/
>> + hdmi_modb(hdmi, STARFIVE_PRE_PLL_CONTROL, STARFIVE_PRE_PLL_POWER_DOWN, 0);
>> +
>> + hdmi_modb(hdmi, STARFIVE_POST_PLL_DIV_2, STARFIVE_POST_PLL_Pre_DIV_MASK,
>> + STARFIVE_POST_PLL_PRE_DIV(hdmi->post_cfg->prediv));
>> + hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_3, hdmi->post_cfg->fbdiv & 0xff);
>> + hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_4, reg_1ad_value);
>> + hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_1, reg_1aa_value);
>> +}
>> +
>> +static void starfive_hdmi_tmds_driver_on(struct starfive_hdmi *hdmi)
>> +{
>> + hdmi_modb(hdmi, STARFIVE_TMDS_CONTROL,
>> + STARFIVE_TMDS_DRIVER_ENABLE, STARFIVE_TMDS_DRIVER_ENABLE);
>> +}
>> +
>> +static void starfive_hdmi_sync_tmds(struct starfive_hdmi *hdmi)
>> +{
>> + /*first send 0 to this bit, then send 1 and keep 1 into this bit*/
>> + hdmi_writeb(hdmi, HDMI_SYNC, 0x0);
>> + hdmi_writeb(hdmi, HDMI_SYNC, 0x1);
>> +}
>> +
>> +static void starfive_hdmi_i2c_init(struct starfive_hdmi *hdmi)
>> +{
>> + int ddc_bus_freq;
>> +
>> + ddc_bus_freq = (clk_get_rate(hdmi->clk_hdmi[CLK_SYS].clk) >> 2) / HDMI_SCL_RATE;
>> +
>> + hdmi_writeb(hdmi, DDC_BUS_FREQ_L, ddc_bus_freq & 0xFF);
>> + hdmi_writeb(hdmi, DDC_BUS_FREQ_H, (ddc_bus_freq >> 8) & 0xFF);
>> +
>> + /* Clear the EDID interrupt flag and mute the interrupt */
>> + hdmi_writeb(hdmi, HDMI_INTERRUPT_MASK1, 0);
>> + hdmi_writeb(hdmi, HDMI_INTERRUPT_STATUS1, m_INT_EDID_READY);
>> +}
>> +
>> +static void starfive_hdmi_phy_get_pre_pll_cfg(struct starfive_hdmi *hdmi)
>> +{
>> + if (hdmi->tmds_rate > 30000000) {
>> + hdmi->pre_cfg.pixclock = hdmi->tmds_rate;
>> + hdmi->pre_cfg.tmdsclock = hdmi->tmds_rate;
>> + hdmi->pre_cfg.prediv = 1;
>> + hdmi->pre_cfg.fbdiv = hdmi->tmds_rate / 3000000;
>> + hdmi->pre_cfg.tmds_div_a = 0;
>> + hdmi->pre_cfg.tmds_div_b = 1;
>> + hdmi->pre_cfg.tmds_div_c = 1;
>> + hdmi->pre_cfg.pclk_div_a = 1;
>> + hdmi->pre_cfg.pclk_div_b = 0;
>> + hdmi->pre_cfg.pclk_div_c = 2;
>> + hdmi->pre_cfg.pclk_div_d = 2;
>> + hdmi->pre_cfg.vco_div_5_en = hdmi->tmds_rate % 3000000 ? 1 : 0;
>> +
>> + if (hdmi->pre_cfg.vco_div_5_en) {
>> + hdmi->pre_cfg.fracdiv = (hdmi->tmds_rate % 3000000) *
>> + 0xffffff / 1000000;
>> + }
>> + } else {
>> + hdmi->pre_cfg.pixclock = hdmi->tmds_rate;
>> + hdmi->pre_cfg.tmdsclock = hdmi->tmds_rate;
>> + hdmi->pre_cfg.prediv = 1;
>> + hdmi->pre_cfg.fbdiv = hdmi->tmds_rate / 1000000;
>> + hdmi->pre_cfg.tmds_div_a = 2;
>> + hdmi->pre_cfg.tmds_div_b = 1;
>> + hdmi->pre_cfg.tmds_div_c = 1;
>> + hdmi->pre_cfg.pclk_div_a = 3;
>> + hdmi->pre_cfg.pclk_div_b = 0;
>> + hdmi->pre_cfg.pclk_div_c = 3;
>> + hdmi->pre_cfg.pclk_div_d = 4;
>> + hdmi->pre_cfg.vco_div_5_en = hdmi->tmds_rate % 1000000 ? 1 : 0;
>> +
>> + if (hdmi->pre_cfg.vco_div_5_en) {
>> + hdmi->pre_cfg.fracdiv = (hdmi->tmds_rate % 1000000) *
>> + 0xffffff / 1000000;
>> + }
>> + }
>> +}
>> +
>> +static int starfive_hdmi_phy_clk_set_rate(struct starfive_hdmi *hdmi)
>> +{
>> + hdmi->post_cfg = post_pll_cfg_table;
>> +
>> + starfive_hdmi_phy_get_pre_pll_cfg(hdmi);
>> +
>> + for (; hdmi->post_cfg->tmdsclock != 0; hdmi->post_cfg++)
>> + if (hdmi->tmds_rate <= hdmi->post_cfg->tmdsclock)
>> + break;
>
> What happens if you don't find a mode?
hdmi->tmds_rate max value is 297M and hdmi->tmds_rate table also 297M (after delete 594M)
it can find a mode always.
>
>> + starfive_hdmi_config_pll(hdmi);
>> +
>> + return 0;
>> +}
>> +
>> +static int starfive_hdmi_config_video_timing(struct starfive_hdmi *hdmi,
>> + struct drm_display_mode *mode)
>> +{
>> + int value;
>> + /* Set detail external video timing */
>> + value = mode->htotal;
>> + hdmi_writew(hdmi, HDMI_VIDEO_EXT_HTOTAL_L, value);
>> +
>> + value = mode->htotal - mode->hdisplay;
>> + hdmi_writew(hdmi, HDMI_VIDEO_EXT_HBLANK_L, value);
>> +
>> + value = mode->htotal - mode->hsync_start;
>> + hdmi_writew(hdmi, HDMI_VIDEO_EXT_HDELAY_L, value);
>> +
>> + value = mode->hsync_end - mode->hsync_start;
>> + hdmi_writew(hdmi, HDMI_VIDEO_EXT_HDURATION_L, value);
>> +
>> + value = mode->vtotal;
>> + hdmi_writew(hdmi, HDMI_VIDEO_EXT_VTOTAL_L, value);
>> +
>> + value = mode->vtotal - mode->vdisplay;
>> + hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VBLANK, value & 0xFF);
>> +
>> + value = mode->vtotal - mode->vsync_start;
>> + hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VDELAY, value & 0xFF);
>> +
>> + value = mode->vsync_end - mode->vsync_start;
>> + hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VDURATION, value & 0xFF);
>> +
>> + /* Set detail external video timing polarity and interlace mode */
>> + value = v_EXTERANL_VIDEO(1);
>> + value |= mode->flags & DRM_MODE_FLAG_PHSYNC ?
>> + v_HSYNC_POLARITY(1) : v_HSYNC_POLARITY(0);
>> + value |= mode->flags & DRM_MODE_FLAG_PVSYNC ?
>> + v_VSYNC_POLARITY(1) : v_VSYNC_POLARITY(0);
>> + value |= mode->flags & DRM_MODE_FLAG_INTERLACE ?
>> + v_INETLACE(1) : v_INETLACE(0);
>> +
>> + hdmi_writeb(hdmi, HDMI_VIDEO_TIMING_CTL, value);
>> + return 0;
>> +}
>> +
>> +static int starfive_hdmi_setup(struct starfive_hdmi *hdmi,
>> + struct drm_display_mode *mode)
>> +{
>> + int ret;
>> + u32 val;
>> +
>> + hdmi_modb(hdmi, STARFIVE_BIAS_CONTROL, STARFIVE_BIAS_ENABLE, STARFIVE_BIAS_ENABLE);
>> + hdmi_writeb(hdmi, STARFIVE_RX_CONTROL, STARFIVE_RX_ENABLE);
>> +
>> + hdmi->tmds_rate = mode->clock * 1000;
>> + starfive_hdmi_phy_clk_set_rate(hdmi);
>
> The calculation is more complicated than that, see
> https://lore.kernel.org/dri-devel/20231128-kms-hdmi-connector-state-v4-13-c7602158306e@kernel.org/
drm_connector_hdmi_compute_mode_clock is a good helper to update my modeclock,
I will match it accordding used hdmi_colorspace
>
>> + ret = readx_poll_timeout(readl_relaxed,
>> + hdmi->regs + (STARFIVE_PRE_PLL_LOCK_STATUS) * 0x04,
>> + val, val & 0x1, 1000, 100000);
>> + if (ret < 0) {
>> + dev_err(hdmi->dev, "failed to wait pre-pll lock\n");
>> + return ret;
>> + }
>> +
>> + ret = readx_poll_timeout(readl_relaxed,
>> + hdmi->regs + (STARFIVE_POST_PLL_LOCK_STATUS) * 0x04,
>> + val, val & 0x1, 1000, 100000);
>> + if (ret < 0) {
>> + dev_err(hdmi->dev, "failed to wait post-pll lock\n");
>> + return ret;
>> + }
>> +
>> + /*turn on LDO*/
>> + hdmi_writeb(hdmi, STARFIVE_LDO_CONTROL, STARFIVE_LDO_ENABLE);
>> + /*turn on serializer*/
>> + hdmi_writeb(hdmi, STARFIVE_SERIALIER_CONTROL, STARFIVE_SERIALIER_ENABLE);
>> +
>> + starfive_hdmi_tx_phy_power_down(hdmi);
>> + starfive_hdmi_config_video_timing(hdmi, mode);
>> + starfive_hdmi_tx_phy_power_on(hdmi);
>> +
>> + starfive_hdmi_tmds_driver_on(hdmi);
>> + starfive_hdmi_sync_tmds(hdmi);
>> +
>> + return 0;
>> +}
>> +
>> +static void starfive_hdmi_encoder_enable(struct drm_encoder *encoder)
>> +{
>> + struct starfive_hdmi_encoder *hdmi_encoder = encoder_to_hdmi(encoder);
>> + struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
>> + int ret, idx;
>> + struct drm_device *drm = hdmi_encoder->hdmi->connector.dev;
>> +
>> + if (drm && !drm_dev_enter(drm, &idx))
>> + return;
>> +
>> + ret = pm_runtime_get_sync(hdmi_encoder->hdmi->dev);
>> + if (ret < 0)
>> + return;
>> + starfive_hdmi_setup(hdmi_encoder->hdmi, mode);
>> +
>> + if (drm)
>> + drm_dev_exit(idx);
>> +}
>
> You're not sending any infoframes?
there is 2 way to modeset the hdmi driver
1、send infoframes to hdmi display , and config the vic to the hardware ,
no need to care the mode timing parameters,
but the hareware support vic list:
01/02/04/05/06/16/17/19/31/32/93/94/95/96/97/98/100/101/102
so final the plan was abandoned
2、get mode timing parameters and config them to hardware
no need care the vic value, this will support most of resolutions,so no sending any infoframe.
Considering the integrity of the HDMI protocol, is this send infoframes necessary?
>
>> +static void starfive_hdmi_encoder_disable(struct drm_encoder *encoder)
>> +{
>> + struct starfive_hdmi_encoder *hdmi_encoder = encoder_to_hdmi(encoder);
>> +
>> + pm_runtime_put(hdmi_encoder->hdmi->dev);
>> +}
>> +
>> +static int
>> +starfive_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
>> + struct drm_crtc_state *crtc_state,
>> + struct drm_connector_state *conn_state)
>> +{
>> + bool valid = false;
>> + struct drm_display_mode *mode = &crtc_state->adjusted_mode;
>> + struct vs_crtc_state *vs_crtc_state = to_vs_crtc_state(crtc_state);
>> +
>> + vs_crtc_state->encoder_type = encoder->encoder_type;
>> + vs_crtc_state->output_fmt = MEDIA_BUS_FMT_RGB888_1X24;
>> +
>> + int pclk = mode->clock * 1000;
>
> That's a compiler warning.
>
>> + if (pclk <= PIXCLOCK_4K_30FPS)
>> + valid = true;
>
> if (pclk > PIXCLOCK_4K_30FPS)
> return -EINVAL;
>
> ?
en , it seems clearer.
>
>> +
>> + return (valid) ? 0 : -EINVAL;
>> +}
>> +
>> +static const struct drm_encoder_helper_funcs starfive_hdmi_encoder_helper_funcs = {
>> + .enable = starfive_hdmi_encoder_enable,
>> + .disable = starfive_hdmi_encoder_disable,
>> + .atomic_check = starfive_hdmi_encoder_atomic_check,
>> +};
>> +
>> +static enum drm_connector_status
>> +starfive_hdmi_connector_detect(struct drm_connector *connector, bool force)
>> +{
>> + struct starfive_hdmi *hdmi = connector_to_hdmi(connector);
>> + struct drm_device *drm = hdmi->connector.dev;
>> + int ret;
>> + int idx;
>> +
>> + if (drm && !drm_dev_enter(drm, &idx))
>> + return connector_status_disconnected;
>> +
>> + ret = pm_runtime_get_sync(hdmi->dev);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = (hdmi_readb(hdmi, HDMI_STATUS) & m_HOTPLUG) ?
>> + connector_status_connected : connector_status_disconnected;
>> + pm_runtime_put(hdmi->dev);
>> +
>> + if (drm)
>> + drm_dev_exit(idx);
>> +
>> + return ret;
>> +}
>> +
>> +static int starfive_hdmi_connector_get_modes(struct drm_connector *connector)
>> +{
>> + struct starfive_hdmi *hdmi = connector_to_hdmi(connector);
>> + int ret = 0;
>> +
>> + if (!hdmi->ddc)
>> + return 0;
>> + ret = pm_runtime_get_sync(hdmi->dev);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = drm_connector_helper_get_modes_from_ddc(connector);
>> + pm_runtime_put(hdmi->dev);
>> +
>> + return ret;
>> +}
>> +
>> +static enum drm_mode_status
>> +starfive_hdmi_connector_mode_valid(struct drm_connector *connector,
>> + struct drm_display_mode *mode)
>> +{
>> + int pclk = mode->clock * 1000;
>> + bool valid = false;
>> +
>> + if (pclk <= PIXCLOCK_4K_30FPS)
>> + valid = true;
>> +
>> + return (valid) ? MODE_OK : MODE_BAD;
>> +}
>> +
>> +static int
>> +starfive_hdmi_probe_single_connector_modes(struct drm_connector *connector,
>> + u32 maxX, u32 maxY)
>> +{
>> + return drm_helper_probe_single_connector_modes(connector, 3840, 2160);
>> +}
>> +
>> +static const struct drm_connector_funcs starfive_hdmi_connector_funcs = {
>> + .fill_modes = starfive_hdmi_probe_single_connector_modes,
>> + .detect = starfive_hdmi_connector_detect,
>> + .reset = drm_atomic_helper_connector_reset,
>> + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
>> + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
>> +};
>> +
>> +static struct drm_connector_helper_funcs starfive_hdmi_connector_helper_funcs = {
>> + .get_modes = starfive_hdmi_connector_get_modes,
>> + .mode_valid = starfive_hdmi_connector_mode_valid,
>> +};
>> +
>> +static int starfive_hdmi_register(struct drm_device *drm,
>> + struct starfive_hdmi_encoder *hdmi_encoder)
>> +{
>> + struct drm_encoder *encoder = &hdmi_encoder->encoder;
>> + struct device *dev = hdmi_encoder->hdmi->dev;
>> +
>> + encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
>> +
>> + /*
>> + * If we failed to find the CRTC(s) which this encoder is
>> + * supposed to be connected to, it's because the CRTC has
>> + * not been registered yet. Defer probing, and hope that
>> + * the required CRTC is added later.
>> + */
>> + if (encoder->possible_crtcs == 0)
>> + return -EPROBE_DEFER;
>> +
>> + drm_encoder_helper_add(encoder, &starfive_hdmi_encoder_helper_funcs);
>> +
>> + hdmi_encoder->hdmi->connector.polled = DRM_CONNECTOR_POLL_HPD;
>> +
>> + drm_connector_helper_add(&hdmi_encoder->hdmi->connector,
>> + &starfive_hdmi_connector_helper_funcs);
>> + drmm_connector_init(drm, &hdmi_encoder->hdmi->connector,
>> + &starfive_hdmi_connector_funcs,
>> + DRM_MODE_CONNECTOR_HDMIA,
>> + hdmi_encoder->hdmi->ddc);
>> +
>> + drm_connector_attach_encoder(&hdmi_encoder->hdmi->connector, encoder);
>> +
>> + return 0;
>> +}
>> +
>> +static irqreturn_t starfive_hdmi_i2c_irq(struct starfive_hdmi *hdmi)
>> +{
>> + struct starfive_hdmi_i2c *i2c = hdmi->i2c;
>> + u8 stat;
>> +
>> + stat = hdmi_readb(hdmi, HDMI_INTERRUPT_STATUS1);
>> + if (!(stat & m_INT_EDID_READY))
>> + return IRQ_NONE;
>> +
>> + /* Clear HDMI EDID interrupt flag */
>> + hdmi_writeb(hdmi, HDMI_INTERRUPT_STATUS1, m_INT_EDID_READY);
>> +
>> + complete(&i2c->cmp);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static irqreturn_t starfive_hdmi_hardirq(int irq, void *dev_id)
>> +{
>> + struct starfive_hdmi *hdmi = dev_id;
>> + irqreturn_t ret = IRQ_NONE;
>> + u8 interrupt;
>> +
>> + if (hdmi->i2c)
>> + ret = starfive_hdmi_i2c_irq(hdmi);
>> +
>> + interrupt = hdmi_readb(hdmi, HDMI_STATUS);
>> + if (interrupt & m_INT_HOTPLUG) {
>> + hdmi_modb(hdmi, HDMI_STATUS, m_INT_HOTPLUG, m_INT_HOTPLUG);
>> + ret = IRQ_WAKE_THREAD;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static irqreturn_t starfive_hdmi_irq(int irq, void *dev_id)
>> +{
>> + struct starfive_hdmi *hdmi = dev_id;
>> +
>> + drm_connector_helper_hpd_irq_event(&hdmi->connector);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static int starfive_hdmi_i2c_read(struct starfive_hdmi *hdmi, struct i2c_msg *msgs)
>> +{
>> + int length = msgs->len;
>> + u8 *buf = msgs->buf;
>> + int ret;
>> +
>> + ret = wait_for_completion_timeout(&hdmi->i2c->cmp, HZ / 10);
>> + if (!ret)
>> + return -EAGAIN;
>> +
>> + while (length--)
>> + *buf++ = hdmi_readb(hdmi, HDMI_EDID_FIFO_ADDR);
>> +
>> + return 0;
>> +}
>> +
>> +static int starfive_hdmi_i2c_write(struct starfive_hdmi *hdmi, struct i2c_msg *msgs)
>> +{
>> + /*
>> + * The DDC module only support read EDID message, so
>> + * we assume that each word write to this i2c adapter
>> + * should be the offset of EDID word address.
>> + */
>> + if (msgs->len != 1 ||
>> + (msgs->addr != DDC_ADDR && msgs->addr != DDC_SEGMENT_ADDR))
>> + return -EINVAL;
>> +
>> + reinit_completion(&hdmi->i2c->cmp);
>> +
>> + if (msgs->addr == DDC_SEGMENT_ADDR)
>> + hdmi->i2c->segment_addr = msgs->buf[0];
>> + if (msgs->addr == DDC_ADDR)
>> + hdmi->i2c->ddc_addr = msgs->buf[0];
>> +
>> + /* Set edid fifo first addr */
>> + hdmi_writeb(hdmi, HDMI_EDID_FIFO_OFFSET, 0x00);
>> +
>> + /* Set edid word address 0x00/0x80 */
>> + hdmi_writeb(hdmi, HDMI_EDID_WORD_ADDR, hdmi->i2c->ddc_addr);
>> +
>> + /* Set edid segment pointer */
>> + hdmi_writeb(hdmi, HDMI_EDID_SEGMENT_POINTER, hdmi->i2c->segment_addr);
>> +
>> + return 0;
>> +}
>> +
>> +static int starfive_hdmi_i2c_xfer(struct i2c_adapter *adap,
>> + struct i2c_msg *msgs, int num)
>> +{
>> + struct starfive_hdmi *hdmi = i2c_get_adapdata(adap);
>> + struct starfive_hdmi_i2c *i2c = hdmi->i2c;
>> + int i, ret = 0;
>> +
>> + mutex_lock(&i2c->lock);
>> +
>> + /* Clear the EDID interrupt flag and unmute the interrupt */
>> + hdmi_writeb(hdmi, HDMI_INTERRUPT_MASK1, m_INT_EDID_READY);
>> + hdmi_writeb(hdmi, HDMI_INTERRUPT_STATUS1, m_INT_EDID_READY);
>> +
>> + for (i = 0; i < num; i++) {
>> + DRM_DEV_DEBUG(hdmi->dev,
>> + "xfer: num: %d/%d, len: %d, flags: %#x\n",
>> + i + 1, num, msgs[i].len, msgs[i].flags);
>> +
>> + if (msgs[i].flags & I2C_M_RD)
>> + ret = starfive_hdmi_i2c_read(hdmi, &msgs[i]);
>> + else
>> + ret = starfive_hdmi_i2c_write(hdmi, &msgs[i]);
>> +
>> + if (ret < 0)
>> + break;
>> + }
>> +
>> + if (!ret)
>> + ret = num;
>> +
>> + /* Mute HDMI EDID interrupt */
>> + hdmi_writeb(hdmi, HDMI_INTERRUPT_MASK1, 0);
>> +
>> + mutex_unlock(&i2c->lock);
>> +
>> + return ret;
>> +}
>> +
>> +static u32 starfive_hdmi_i2c_func(struct i2c_adapter *adapter)
>> +{
>> + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
>> +}
>> +
>> +static const struct i2c_algorithm starfive_hdmi_algorithm = {
>> + .master_xfer = starfive_hdmi_i2c_xfer,
>> + .functionality = starfive_hdmi_i2c_func,
>> +};
>> +
>> +static struct i2c_adapter *starfive_hdmi_i2c_adapter(struct starfive_hdmi *hdmi)
>> +{
>> + struct i2c_adapter *adap;
>> + struct starfive_hdmi_i2c *i2c;
>> + int ret;
>> +
>> + i2c = devm_kzalloc(hdmi->dev, sizeof(*i2c), GFP_KERNEL);
>> + if (!i2c)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + mutex_init(&i2c->lock);
>> + init_completion(&i2c->cmp);
>> +
>> + adap = &i2c->adap;
>> + adap->class = I2C_CLASS_DDC;
>> + adap->owner = THIS_MODULE;
>> + adap->dev.parent = hdmi->dev;
>> + adap->algo = &starfive_hdmi_algorithm;
>> + strscpy(adap->name, "Starfive HDMI", sizeof(adap->name));
>> + i2c_set_adapdata(adap, hdmi);
>> +
>> + ret = devm_i2c_add_adapter(hdmi->dev, adap);
>> + if (ret) {
>> + dev_warn(hdmi->dev, "cannot add %s I2C adapter\n", adap->name);
>> + devm_kfree(hdmi->dev, i2c);
>> + return ERR_PTR(ret);
>> + }
>> +
>> + hdmi->i2c = i2c;
>> +
>> + DRM_DEV_INFO(hdmi->dev, "registered %s I2C bus driver success\n", adap->name);
>> +
>> + return adap;
>> +}
>> +
>> +static int starfive_hdmi_get_clk_rst(struct device *dev, struct starfive_hdmi *hdmi)
>> +{
>> + int ret;
>> +
>> + hdmi->nclks = ARRAY_SIZE(hdmi->clk_hdmi);
>> + for (int i = 0; i < hdmi->nclks; ++i)
>> + hdmi->clk_hdmi[i].id = hdmi_clocks[i];
>> +
>> + ret = devm_clk_bulk_get(dev, hdmi->nclks, hdmi->clk_hdmi);
>> + if (ret) {
>> + dev_err(dev, "Failed to get clk controls\n");
>> + return ret;
>> + }
>> +
>> + hdmi->tx_rst = devm_reset_control_get_by_index(dev, 0);
>> + if (IS_ERR(hdmi->tx_rst)) {
>> + dev_err(dev, "failed to get tx_rst reset\n");
>> + return PTR_ERR(hdmi->tx_rst);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int starfive_hdmi_bind(struct device *dev, struct device *master,
>> + void *data)
>> +{
>> + struct drm_device *drm = dev_get_drvdata(master);
>> + struct starfive_hdmi_encoder *hdmi_encoder;
>> + int ret;
>> +
>> + hdmi_encoder = drmm_simple_encoder_alloc(drm, struct starfive_hdmi_encoder,
>> + encoder, DRM_MODE_ENCODER_TMDS);
>> + if (IS_ERR(hdmi_encoder))
>> + return PTR_ERR(hdmi_encoder);
>> +
>> + hdmi_encoder->hdmi = dev_get_drvdata(dev);
>> + hdmi_encoder->hdmi->drm_dev = drm;
>> +
>> + ret = pm_runtime_resume_and_get(dev);
>> + if (ret)
>> + return ret;
>> +
>> + starfive_hdmi_i2c_init(hdmi_encoder->hdmi);
>> +
>> + ret = starfive_hdmi_register(drm, hdmi_encoder);
>> + if (ret)
>> + goto err_put_adapter;
>> +
>> + /* Unmute hotplug interrupt */
>> + hdmi_modb(hdmi_encoder->hdmi, HDMI_STATUS, m_MASK_INT_HOTPLUG, v_MASK_INT_HOTPLUG(1));
>> +
>> + ret = devm_request_threaded_irq(dev, hdmi_encoder->hdmi->irq, starfive_hdmi_hardirq,
>> + starfive_hdmi_irq, IRQF_SHARED,
>> + dev_name(dev), hdmi_encoder->hdmi);
>> + if (ret < 0)
>> + goto err_put_adapter;
>> +
>> + pm_runtime_put_sync(dev);
>> +
>> + return 0;
>> +
>> +err_put_adapter:
>> + i2c_put_adapter(hdmi_encoder->hdmi->ddc);
>> + return ret;
>> +}
>> +
>> +static const struct component_ops starfive_hdmi_ops = {
>> + .bind = starfive_hdmi_bind,
>> +};
>> +
>> +static int starfive_hdmi_probe(struct platform_device *pdev)
>> +{
>> + int ret;
>> + struct starfive_hdmi *hdmi;
>> + struct resource *iores;
>> +
>> + hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
>> + if (!hdmi)
>> + return -ENOMEM;
>> +
>> + dev_set_drvdata(&pdev->dev, hdmi);
>> + hdmi->dev = &pdev->dev;
>> +
>> + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + hdmi->regs = devm_ioremap_resource(hdmi->dev, iores);
>> + if (IS_ERR(hdmi->regs))
>> + return PTR_ERR(hdmi->regs);
>> +
>> + ret = starfive_hdmi_get_clk_rst(hdmi->dev, hdmi);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = devm_pm_runtime_enable(hdmi->dev);
>> + if (ret)
>> + return ret;
>> +
>> + hdmi->irq = platform_get_irq(pdev, 0);
>> + if (hdmi->irq < 0) {
>> + ret = hdmi->irq;
>> + return ret;
>> + }
>> +
>> + hdmi->ddc = starfive_hdmi_i2c_adapter(hdmi);
>> + if (IS_ERR(hdmi->ddc)) {
>> + ret = PTR_ERR(hdmi->ddc);
>> + hdmi->ddc = NULL;
>> + return ret;
>> + }
>> +
>> + return component_add(&pdev->dev, &starfive_hdmi_ops);
>> +}
>> +
>> +static int starfive_hdmi_remove(struct platform_device *pdev)
>> +{
>> + component_del(&pdev->dev, &starfive_hdmi_ops);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct dev_pm_ops hdmi_pm_ops = {
>> + SET_RUNTIME_PM_OPS(hdmi_runtime_suspend, hdmi_runtime_resume, NULL)
>> + SET_LATE_SYSTEM_SLEEP_PM_OPS(hdmi_system_pm_suspend, hdmi_system_pm_resume)
>> +};
>> +
>> +static const struct of_device_id starfive_hdmi_dt_ids[] = {
>> + { .compatible = "starfive,jh7110-inno-hdmi",},
>
> So it's inno hdmi, just like Rockchip then?
>
> This should be a common driver.
Rockchip has a inno hdmi IP. and Starfive has a inno hdmi IP.
but the harewawre difference of them is big , it is not easy to use the common driver
maybe i need the inno hdmi version here to make a distinction
best regards
Keith
> Maxime
Powered by blists - more mailing lists