linux-kernel - Re: [v3 4/6] drm/vs: Add KMS crtc&plane

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <13e146c581a51121308a0cad4db44bf3a0d2ae75.camel@icenowy.me>
Date:   Thu, 07 Dec 2023 23:29:05 +0800
From:   Icenowy Zheng <uwu@...nowy.me>
To:     Keith Zhao <keith.zhao@...rfivetech.com>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "linux-riscv@...ts.infradead.org" <linux-riscv@...ts.infradead.org>
Cc:     "aou@...s.berkeley.edu" <aou@...s.berkeley.edu>,
        "suijingfeng@...ngson.cn" <suijingfeng@...ngson.cn>,
        "krzysztof.kozlowski+dt@...aro.org" 
        <krzysztof.kozlowski+dt@...aro.org>,
        William Qiu <william.qiu@...rfivetech.com>,
        "mripard@...nel.org" <mripard@...nel.org>,
        Xingyu Wu <xingyu.wu@...rfivetech.com>,
        Jack Zhu <jack.zhu@...rfivetech.com>,
        "palmer@...belt.com" <palmer@...belt.com>,
        "tzimmermann@...e.de" <tzimmermann@...e.de>,
        "paul.walmsley@...ive.com" <paul.walmsley@...ive.com>,
        Shengyang Chen <shengyang.chen@...rfivetech.com>,
        Changhuang Liang <changhuang.liang@...rfivetech.com>
Subject: Re: [v3 4/6] drm/vs: Add KMS crtc&plane

在 2023-12-07星期四的 19:31 +0800，Keith Zhao写道：
> 
> 
> On 2023/12/7 16:41, Icenowy Zheng wrote:
> > 在 2023-12-04星期一的 20:33 +0800，Keith Zhao写道：
> > *snip*
> > 
> > > +static void update_cursor_plane(struct vs_dc *dc, struct
> > > vs_plane
> > > *plane,
> > > +                               struct drm_plane *drm_plane,
> > > +                               struct drm_atomic_state
> > > *drm_state)
> > > +{
> > > +       struct drm_plane_state *state =
> > > drm_atomic_get_new_plane_state(drm_state,
> > > +                                                                
> > >     
> > >   drm_plane);
> > > +       struct vs_plane_state *plane_state =
> > > to_vs_plane_state(state);
> > > +       struct drm_framebuffer *drm_fb = state->fb;
> > > +       struct dc_hw_cursor cursor;
> > > +
> > > +       cursor.address = plane_state->dma_addr[0];
> > > +       cursor.x = state->crtc_x;
> > > +       cursor.y = state->crtc_y;
> > 
> > From my experiments on poking with registers on T-Head TH1520 (also
> > uses DC8200 display controller and a similar driver), the DC8200
> > hardware have a different definition of cursor position X and Y
> > with
> > the CRTC plane state.
> > 
> > For CRTC plane state, hot_x and hot_y are only provided as
> > reference,
> > and the cursor should be displayed with its (0,0) drawn to (crtc_x,
> > crtc_y) ([XY]_crtc are values specified in CRTC state, the right
> > part
> > of the assignments here), when the cursor is moved to (0,0) but the
> > hot
> > point is not (0,0), it could be negative.
> > 
> > However, for DC8200 registers definition, cursor XY position could
> > not
> > be negative -- the cursor will disappear then; because in its
> > definition, the cursor XY position should be where the cursor is
> > pointing to, instead of its (0,0). DC8200 will draw (0,0) of the
> > cursor
> > to (x - hot_x, y - hot_y). So to met the expectation of the KMS
> > plane
> > settings, the DC8200 position should be set to (crtc_x + hot_x,
> > crtc_y
> > + hot_y) instead. Thus these two lines of code should be:
> > 
> > ```
> >         cursor.x = state->crtc_x + drm_fb->hot_x;
> >         cursor.y = state->crtc_y + drm_fb->hot_y;
> > ```
> > 
> > 
> > > +       cursor.hot_x = drm_fb->hot_x;
> > > +       cursor.hot_y = drm_fb->hot_y;
> > > +       cursor.display_id = to_vs_display_id(dc, state->crtc);
> > > +       update_cursor_size(state, &cursor);
> > > +       cursor.enable = true;
> > > +
> > > +       dc_hw_update_cursor(&dc->hw, cursor.display_id, &cursor);
> > > +}
> > *snip
> hello Icenowy:
> you are deep understanding on dc8200.
> by the way of practice
> I tested this change on the debian desktop, is there a way to compare
> the cursor behavior change?

Try selecting some small-sized text in a textbox?

> Thanks
> 
> 
>