| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20231207-mbly-uart-v6-2-e384afa5e78c@bootlin.com>
Date: Thu, 07 Dec 2023 18:56:07 +0100
From: Théo Lebrun <theo.lebrun@...tlin.com>
To: Russell King <linux@...linux.org.uk>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jirislaby@...nel.org>
Cc: linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org,
Linus Walleij <linus.walleij@...aro.org>,
Grégory Clement <gregory.clement@...tlin.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Vladimir Kondratiev <vladimir.kondratiev@...ileye.com>,
Tawfik Bayouk <tawfik.bayouk@...ileye.com>,
Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>,
Théo Lebrun <theo.lebrun@...tlin.com>
Subject: [PATCH v6 2/8] tty: serial: amba-pl011: fix whitespace formatting
Follow recommandations from:
$ ./scripts/checkpatch.pl --strict --file \
drivers/tty/serial/amba-pl011.c
We fix 5 warnings and 48 checks, all related to whitespace.
Culprits are:
CHECK: Alignment should match open parenthesis
CHECK: Blank lines aren't necessary after an open brace '{'
CHECK: Lines should not end with a '('
CHECK: Please don't use multiple blank lines
CHECK: Please use a blank line after function/struct/union/enum
declarations
CHECK: spaces preferred around that '/' (ctx:VxV)
CHECK: spaces preferred around that '|' (ctx:VxV)
WARNING: Missing a blank line after declarations
WARNING: please, no spaces at the start of a line
Signed-off-by: Théo Lebrun <theo.lebrun@...tlin.com>
---
drivers/tty/serial/amba-pl011.c | 97 +++++++++++++++++++----------------------
1 file changed, 45 insertions(+), 52 deletions(-)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index b7635363373e..7bd0b68ef92f 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -50,7 +50,7 @@
#define AMBA_ISR_PASS_LIMIT 256
-#define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE)
+#define UART_DR_ERROR (UART011_DR_OE | UART011_DR_BE | UART011_DR_PE | UART011_DR_FE)
#define UART_DUMMY_DR_RX (1 << 16)
enum {
@@ -125,7 +125,7 @@ static unsigned int get_fifosize_arm(struct amba_device *dev)
static struct vendor_data vendor_arm = {
.reg_offset = pl011_std_offsets,
- .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+ .ifls = UART011_IFLS_RX4_8 | UART011_IFLS_TX4_8,
.fr_busy = UART01x_FR_BUSY,
.fr_dsr = UART01x_FR_DSR,
.fr_cts = UART01x_FR_CTS,
@@ -203,7 +203,7 @@ static unsigned int get_fifosize_st(struct amba_device *dev)
static struct vendor_data vendor_st = {
.reg_offset = pl011_st_offsets,
- .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
+ .ifls = UART011_IFLS_RX_HALF | UART011_IFLS_TX_HALF,
.fr_busy = UART01x_FR_BUSY,
.fr_dsr = UART01x_FR_DSR,
.fr_cts = UART01x_FR_CTS,
@@ -277,13 +277,13 @@ struct uart_amba_port {
static unsigned int pl011_tx_empty(struct uart_port *port);
static unsigned int pl011_reg_to_offset(const struct uart_amba_port *uap,
- unsigned int reg)
+ unsigned int reg)
{
return uap->reg_offset[reg];
}
static unsigned int pl011_read(const struct uart_amba_port *uap,
- unsigned int reg)
+ unsigned int reg)
{
void __iomem *addr = uap->port.membase + pl011_reg_to_offset(uap, reg);
@@ -292,7 +292,7 @@ static unsigned int pl011_read(const struct uart_amba_port *uap,
}
static void pl011_write(unsigned int val, const struct uart_amba_port *uap,
- unsigned int reg)
+ unsigned int reg)
{
void __iomem *addr = uap->port.membase + pl011_reg_to_offset(uap, reg);
@@ -358,7 +358,6 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap)
return fifotaken;
}
-
/*
* All the DMA operation mode stuff goes inside this ifdef.
* This assumes that you have a generic DMA device interface,
@@ -369,7 +368,7 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap)
#define PL011_DMA_BUFFER_SIZE PAGE_SIZE
static int pl011_dmabuf_init(struct dma_chan *chan, struct pl011_dmabuf *db,
- enum dma_data_direction dir)
+ enum dma_data_direction dir)
{
db->buf = dma_alloc_coherent(chan->device->dev, PL011_DMA_BUFFER_SIZE,
&db->dma, GFP_KERNEL);
@@ -381,7 +380,7 @@ static int pl011_dmabuf_init(struct dma_chan *chan, struct pl011_dmabuf *db,
}
static void pl011_dmabuf_free(struct dma_chan *chan, struct pl011_dmabuf *db,
- enum dma_data_direction dir)
+ enum dma_data_direction dir)
{
if (db->buf) {
dma_free_coherent(chan->device->dev,
@@ -424,7 +423,7 @@ static void pl011_dma_probe(struct uart_amba_port *uap)
dma_cap_set(DMA_SLAVE, mask);
chan = dma_request_channel(mask, plat->dma_filter,
- plat->dma_tx_param);
+ plat->dma_tx_param);
if (!chan) {
dev_err(uap->port.dev, "no TX DMA channel!\n");
return;
@@ -470,7 +469,7 @@ static void pl011_dma_probe(struct uart_amba_port *uap)
DMA_RESIDUE_GRANULARITY_DESCRIPTOR) {
dma_release_channel(chan);
dev_info(uap->port.dev,
- "RX DMA disabled - no residue processing\n");
+ "RX DMA disabled - no residue processing\n");
return;
}
}
@@ -499,18 +498,16 @@ static void pl011_dma_probe(struct uart_amba_port *uap)
else
uap->dmarx.poll_timeout = 3000;
} else if (!plat && dev->of_node) {
- uap->dmarx.auto_poll_rate = of_property_read_bool(
- dev->of_node, "auto-poll");
+ uap->dmarx.auto_poll_rate =
+ of_property_read_bool(dev->of_node, "auto-poll");
if (uap->dmarx.auto_poll_rate) {
u32 x;
- if (0 == of_property_read_u32(dev->of_node,
- "poll-rate-ms", &x))
+ if (0 == of_property_read_u32(dev->of_node, "poll-rate-ms", &x))
uap->dmarx.poll_rate = x;
else
uap->dmarx.poll_rate = 100;
- if (0 == of_property_read_u32(dev->of_node,
- "poll-timeout-ms", &x))
+ if (0 == of_property_read_u32(dev->of_node, "poll-timeout-ms", &x))
uap->dmarx.poll_timeout = x;
else
uap->dmarx.poll_timeout = 3000;
@@ -547,7 +544,7 @@ static void pl011_dma_tx_callback(void *data)
uart_port_lock_irqsave(&uap->port, &flags);
if (uap->dmatx.queued)
dma_unmap_single(dmatx->chan->device->dev, dmatx->dma,
- dmatx->len, DMA_TO_DEVICE);
+ dmatx->len, DMA_TO_DEVICE);
dmacr = uap->dmacr;
uap->dmacr = dmacr & ~UART011_TXDMAE;
@@ -643,7 +640,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap)
}
desc = dmaengine_prep_slave_single(chan, dmatx->dma, dmatx->len, DMA_MEM_TO_DEV,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc) {
dma_unmap_single(dma_dev->dev, dmatx->dma, dmatx->len, DMA_TO_DEVICE);
uap->dmatx.queued = false;
@@ -832,8 +829,8 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap)
dbuf = uap->dmarx.use_buf_b ?
&uap->dmarx.dbuf_b : &uap->dmarx.dbuf_a;
desc = dmaengine_prep_slave_single(rxchan, dbuf->dma, dbuf->len,
- DMA_DEV_TO_MEM,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
/*
* If the DMA engine is busy and cannot prepare a
* channel, no big deal, the driver will fall back
@@ -889,14 +886,12 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap,
/* Pick the remain data from the DMA */
if (pending) {
-
/*
* First take all chars in the DMA pipe, then look in the FIFO.
* Note that tty_insert_flip_buf() tries to take as many chars
* as it can.
*/
- dma_count = tty_insert_flip_string(port, dbuf->buf + dmataken,
- pending);
+ dma_count = tty_insert_flip_string(port, dbuf->buf + dmataken, pending);
uap->port.icount.rx += dma_count;
if (dma_count < pending)
@@ -1072,7 +1067,7 @@ static void pl011_dma_rx_poll(struct timer_list *t)
dmataken = dbuf->len - dmarx->last_residue;
size = dmarx->last_residue - state.residue;
dma_count = tty_insert_flip_string(port, dbuf->buf + dmataken,
- size);
+ size);
if (dma_count == size)
dmarx->last_residue = state.residue;
dmarx->last_jiffies = jiffies;
@@ -1085,7 +1080,6 @@ static void pl011_dma_rx_poll(struct timer_list *t)
*/
if (jiffies_to_msecs(jiffies - dmarx->last_jiffies)
> uap->dmarx.poll_timeout) {
-
uart_port_lock_irqsave(&uap->port, &flags);
pl011_dma_rx_stop(uap);
uap->im |= UART011_RXIM;
@@ -1097,7 +1091,7 @@ static void pl011_dma_rx_poll(struct timer_list *t)
del_timer(&uap->dmarx.timer);
} else {
mod_timer(&uap->dmarx.timer,
- jiffies + msecs_to_jiffies(uap->dmarx.poll_rate));
+ jiffies + msecs_to_jiffies(uap->dmarx.poll_rate));
}
}
@@ -1129,7 +1123,7 @@ static void pl011_dma_startup(struct uart_amba_port *uap)
/* Allocate and map DMA RX buffers */
ret = pl011_dmabuf_init(uap->dmarx.chan, &uap->dmarx.dbuf_a,
- DMA_FROM_DEVICE);
+ DMA_FROM_DEVICE);
if (ret) {
dev_err(uap->port.dev, "failed to init DMA %s: %d\n",
"RX buffer A", ret);
@@ -1137,12 +1131,12 @@ static void pl011_dma_startup(struct uart_amba_port *uap)
}
ret = pl011_dmabuf_init(uap->dmarx.chan, &uap->dmarx.dbuf_b,
- DMA_FROM_DEVICE);
+ DMA_FROM_DEVICE);
if (ret) {
dev_err(uap->port.dev, "failed to init DMA %s: %d\n",
"RX buffer B", ret);
pl011_dmabuf_free(uap->dmarx.chan, &uap->dmarx.dbuf_a,
- DMA_FROM_DEVICE);
+ DMA_FROM_DEVICE);
goto skip_rx;
}
@@ -1169,8 +1163,7 @@ static void pl011_dma_startup(struct uart_amba_port *uap)
if (uap->dmarx.poll_rate) {
timer_setup(&uap->dmarx.timer, pl011_dma_rx_poll, 0);
mod_timer(&uap->dmarx.timer,
- jiffies +
- msecs_to_jiffies(uap->dmarx.poll_rate));
+ jiffies + msecs_to_jiffies(uap->dmarx.poll_rate));
uap->dmarx.last_residue = PL011_DMA_BUFFER_SIZE;
uap->dmarx.last_jiffies = jiffies;
}
@@ -1359,8 +1352,8 @@ static void pl011_stop_rx(struct uart_port *port)
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
- uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM|
- UART011_PEIM|UART011_BEIM|UART011_OEIM);
+ uap->im &= ~(UART011_RXIM | UART011_RTIM | UART011_FEIM |
+ UART011_PEIM | UART011_BEIM | UART011_OEIM);
pl011_write(uap->im, uap, REG_IMSC);
pl011_dma_rx_stop(uap);
@@ -1380,7 +1373,7 @@ static void pl011_enable_ms(struct uart_port *port)
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
- uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM;
+ uap->im |= UART011_RIMIM | UART011_CTSMIM | UART011_DCDMIM | UART011_DSRMIM;
pl011_write(uap->im, uap, REG_IMSC);
}
@@ -1409,8 +1402,7 @@ __acquires(&uap->port.lock)
uap->dmarx.last_jiffies = jiffies;
uap->dmarx.last_residue = PL011_DMA_BUFFER_SIZE;
mod_timer(&uap->dmarx.timer,
- jiffies +
- msecs_to_jiffies(uap->dmarx.poll_rate));
+ jiffies + msecs_to_jiffies(uap->dmarx.poll_rate));
}
#endif
}
@@ -1557,18 +1549,17 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
do {
check_apply_cts_event_workaround(uap);
- pl011_write(status & ~(UART011_TXIS|UART011_RTIS|
- UART011_RXIS),
+ pl011_write(status & ~(UART011_TXIS | UART011_RTIS | UART011_RXIS),
uap, REG_ICR);
- if (status & (UART011_RTIS|UART011_RXIS)) {
+ if (status & (UART011_RTIS | UART011_RXIS)) {
if (pl011_dma_rx_running(uap))
pl011_dma_rx_irq(uap);
else
pl011_rx_chars(uap);
}
- if (status & (UART011_DSRMIS|UART011_DCDMIS|
- UART011_CTSMIS|UART011_RIMIS))
+ if (status & (UART011_DSRMIS | UART011_DCDMIS |
+ UART011_CTSMIS | UART011_RIMIS))
pl011_modem_status(uap);
if (status & UART011_TXIS)
pl011_tx_chars(uap, true);
@@ -1707,8 +1698,7 @@ static int pl011_get_poll_char(struct uart_port *port)
return pl011_read(uap, REG_DR);
}
-static void pl011_put_poll_char(struct uart_port *port,
- unsigned char ch)
+static void pl011_put_poll_char(struct uart_port *port, unsigned char ch)
{
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
@@ -1909,14 +1899,13 @@ static int sbsa_uart_startup(struct uart_port *port)
return 0;
}
-static void pl011_shutdown_channel(struct uart_amba_port *uap,
- unsigned int lcrh)
+static void pl011_shutdown_channel(struct uart_amba_port *uap, unsigned int lcrh)
{
- unsigned long val;
+ unsigned long val;
- val = pl011_read(uap, lcrh);
- val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
- pl011_write(val, uap, lcrh);
+ val = pl011_read(uap, lcrh);
+ val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
+ pl011_write(val, uap, lcrh);
}
/*
@@ -2065,7 +2054,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
uap->dmarx.poll_rate = DIV_ROUND_UP(10000000, baud);
#endif
- if (baud > port->uartclk/16)
+ if (baud > port->uartclk / 16)
quot = DIV_ROUND_CLOSEST(port->uartclk * 8, baud);
else
quot = DIV_ROUND_CLOSEST(port->uartclk * 4, baud);
@@ -2218,13 +2207,14 @@ static void pl011_config_port(struct uart_port *port, int flags)
static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser)
{
int ret = 0;
+
if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA)
ret = -EINVAL;
if (ser->irq < 0 || ser->irq >= nr_irqs)
ret = -EINVAL;
if (ser->baud_base < 9600)
ret = -EINVAL;
- if (port->mapbase != (unsigned long) ser->iomem_base)
+ if (port->mapbase != (unsigned long)ser->iomem_base)
ret = -EINVAL;
return ret;
}
@@ -2613,7 +2603,9 @@ static int __init pl011_early_console_setup(struct earlycon_device *device,
return 0;
}
+
OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup);
+
OF_EARLYCON_DECLARE(pl011, "arm,sbsa-uart", pl011_early_console_setup);
/*
@@ -2636,6 +2628,7 @@ qdf2400_e44_early_console_setup(struct earlycon_device *device,
device->con->write = qdf2400_e44_early_write;
return 0;
}
+
EARLYCON_DECLARE(qdf2400_e44, qdf2400_e44_early_console_setup);
#else
--
2.43.0
Powered by blists - more mailing lists