linux-kernel - [PATCH v6 5/8] tty: serial: amba-pl011: fix formatting of conditions

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20231207-mbly-uart-v6-5-e384afa5e78c@bootlin.com>
Date:   Thu, 07 Dec 2023 18:56:10 +0100
From:   Théo Lebrun <theo.lebrun@...tlin.com>
To:     Russell King <linux@...linux.org.uk>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jiri Slaby <jirislaby@...nel.org>
Cc:     linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org,
        Linus Walleij <linus.walleij@...aro.org>,
        Grégory Clement <gregory.clement@...tlin.com>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>,
        Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
        Vladimir Kondratiev <vladimir.kondratiev@...ileye.com>,
        Tawfik Bayouk <tawfik.bayouk@...ileye.com>,
        Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>,
        Théo Lebrun <theo.lebrun@...tlin.com>
Subject: [PATCH v6 5/8] tty: serial: amba-pl011: fix formatting of
 conditions

Fix the following checkpatch warnings & checks:

	$ ./scripts/checkpatch.pl --strict --file \
        drivers/tty/serial/amba-pl011.c

    CHECK: Unbalanced braces around else statement
    CHECK: Unnecessary parentheses around '[...]'
    CHECK: braces {} should be used on all arms of this statement
    CHECK: Comparison to NULL could be written "[...]"
    WARNING: Comparisons should place the constant on the right side of the test

Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@...tlin.com>
---
 drivers/tty/serial/amba-pl011.c | 26 ++++++++++++++------------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index be8888db1a37..3c657bac2359 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -330,10 +330,11 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap)
 				uap->port.icount.brk++;
 				if (uart_handle_break(&uap->port))
 					continue;
-			} else if (ch & UART011_DR_PE)
+			} else if (ch & UART011_DR_PE) {
 				uap->port.icount.parity++;
-			else if (ch & UART011_DR_FE)
+			} else if (ch & UART011_DR_FE) {
 				uap->port.icount.frame++;
+			}
 			if (ch & UART011_DR_OE)
 				uap->port.icount.overrun++;
 
@@ -464,7 +465,7 @@ static void pl011_dma_probe(struct uart_amba_port *uap)
 		 * If the controller does, check for suitable residue processing
 		 * otherwise assime all is well.
 		 */
-		if (0 == dma_get_slave_caps(chan, &caps)) {
+		if (dma_get_slave_caps(chan, &caps) == 0) {
 			if (caps.residue_granularity ==
 					DMA_RESIDUE_GRANULARITY_DESCRIPTOR) {
 				dma_release_channel(chan);
@@ -503,11 +504,11 @@ static void pl011_dma_probe(struct uart_amba_port *uap)
 			if (uap->dmarx.auto_poll_rate) {
 				u32 x;
 
-				if (0 == of_property_read_u32(dev->of_node, "poll-rate-ms", &x))
+				if (of_property_read_u32(dev->of_node, "poll-rate-ms", &x) == 0)
 					uap->dmarx.poll_rate = x;
 				else
 					uap->dmarx.poll_rate = 100;
-				if (0 == of_property_read_u32(dev->of_node, "poll-timeout-ms", &x))
+				if (of_property_read_u32(dev->of_node, "poll-timeout-ms", &x) == 0)
 					uap->dmarx.poll_timeout = x;
 				else
 					uap->dmarx.poll_timeout = 3000;
@@ -615,9 +616,9 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap)
 	if (count > PL011_DMA_BUFFER_SIZE)
 		count = PL011_DMA_BUFFER_SIZE;
 
-	if (xmit->tail < xmit->head)
+	if (xmit->tail < xmit->head) {
 		memcpy(&dmatx->buf[0], &xmit->buf[xmit->tail], count);
-	else {
+	} else {
 		size_t first = UART_XMIT_SIZE - xmit->tail;
 		size_t second;
 
@@ -751,8 +752,9 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
 			if (pl011_dma_tx_refill(uap) > 0) {
 				uap->im &= ~UART011_TXIM;
 				pl011_write(uap->im, uap, REG_IMSC);
-			} else
+			} else {
 				ret = false;
+			}
 		} else if (!(uap->dmacr & UART011_TXDMAE)) {
 			uap->dmacr |= UART011_TXDMAE;
 			pl011_write(uap->dmacr, uap, REG_DMACR);
@@ -2139,9 +2141,9 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 	 * else we see data corruption.
 	 */
 	if (uap->vendor->oversampling) {
-		if ((baud >= 3000000) && (baud < 3250000) && (quot > 1))
+		if (baud >= 3000000 && baud < 3250000 && quot > 1)
 			quot -= 1;
-		else if ((baud > 3250000) && (quot > 2))
+		else if (baud > 3250000 && quot > 2)
 			quot -= 2;
 	}
 	/* Set baud rate */
@@ -2668,7 +2670,7 @@ static int pl011_probe_dt_alias(int index, struct device *dev)
 		ret = index;
 	} else {
 		seen_dev_with_alias = true;
-		if (ret >= ARRAY_SIZE(amba_ports) || amba_ports[ret] != NULL) {
+		if (ret >= ARRAY_SIZE(amba_ports) || amba_ports[ret]) {
 			dev_warn(dev, "requested serial port %d  not available.\n", ret);
 			ret = index;
 		}
@@ -2702,7 +2704,7 @@ static int pl011_find_free_port(void)
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
-		if (amba_ports[i] == NULL)
+		if (!amba_ports[i])
 			return i;
 
 	return -EBUSY;

-- 
2.43.0