[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <44c36d3f-dacd-4ca9-b92a-5febdc5d1340@linaro.org>
Date: Thu, 7 Dec 2023 20:47:46 +0100
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Neil Armstrong <neil.armstrong@...aro.org>,
Rob Clark <robdclark@...il.com>,
Abhinav Kumar <quic_abhinavk@...cinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Sean Paul <sean@...rly.run>,
Marijn Suijten <marijn.suijten@...ainline.org>,
David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Kuogee Hsieh <quic_khsieh@...cinc.com>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org,
freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 3/3] arm64: dts: qcom: sm8650: Add DisplayPort device
nodes
On 12/7/23 17:37, Neil Armstrong wrote:
> Declare the displayport controller present on the Qualcomm SM8650 SoC
> and connected to the USB3/DP Combo PHY.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
> ---
[...]
> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
> + <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
> + <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
> + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
What about PIXEL1 clocks?
[...]
> + opp-162000000 {
> + opp-hz = /bits/ 64 <162000000>;
> + required-opps = <&rpmhpd_opp_low_svs_d1>;
> + };
> +
> + opp-270000000 {
> + opp-hz = /bits/ 64 <270000000>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
> +
> + opp-540000000 {
> + opp-hz = /bits/ 64 <540000000>;
> + required-opps = <&rpmhpd_opp_svs_l1>;
> + };
> +
> + opp-810000000 {
> + opp-hz = /bits/ 64 <810000000>;
> + required-opps = <&rpmhpd_opp_nom>;
> + };
> + };
> + };
> };
>
> dispcc: clock-controller@...0000 {
> @@ -2996,8 +3086,8 @@ dispcc: clock-controller@...0000 {
> <&mdss_dsi0_phy 1>,
> <&mdss_dsi1_phy 0>,
> <&mdss_dsi1_phy 1>,
> - <0>, /* dp0 */
> - <0>,
> + <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
> + <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
> <0>, /* dp1 */
> <0>,
> <0>, /* dp2 */
I noticed that this is not in line with your mdss patch [1]
where there are only two DP INTFs available.. Unless all of
these controllers can work using some sharing/only some at
one time...
Konrad
[1] https://lore.kernel.org/all/20231030-topic-sm8650-upstream-mdss-v2-5-43f1887c82b8@linaro.org/
Powered by blists - more mailing lists