linux-kernel - [PATCH v3 4/4] media: rkisp1: Fix IRQ disable race issue

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20231207-rkisp-irq-fix-v3-4-358a2c871a3c@ideasonboard.com>
Date:   Thu, 07 Dec 2023 09:57:48 +0200
From:   Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
To:     Dafna Hirschfeld <dafna@...tmail.com>,
        Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        Heiko Stuebner <heiko@...ech.de>,
        Paul Elder <paul.elder@...asonboard.com>
Cc:     Alexander Stein <alexander.stein@...tq-group.com>,
        kieran.bingham@...asonboard.com, umang.jain@...asonboard.com,
        aford173@...il.com, linux-media@...r.kernel.org,
        linux-rockchip@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
Subject: [PATCH v3 4/4] media: rkisp1: Fix IRQ disable race issue

In rkisp1_isp_stop() and rkisp1_csi_disable() the driver masks the
interrupts and then apparently assumes that the interrupt handler won't
be running, and proceeds in the stop procedure. This is not the case, as
the interrupt handler can already be running, which would lead to the
ISP being disabled while the interrupt handler handling a captured
frame.

This brings up two issues: 1) the ISP could be powered off while the
interrupt handler is still running and accessing registers, leading to
board lockup, and 2) the interrupt handler code and the code that
disables the streaming might do things that conflict.

It is not clear to me if 2) causes a real issue, but 1) can be seen with
a suitable delay (or printk in my case) in the interrupt handler,
leading to board lockup.

Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Tested-by: Adam Ford <aford173@...il.com>  #imx8mp-beacon
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
---
 drivers/media/platform/rockchip/rkisp1/rkisp1-csi.c | 14 +++++++++++++-
 drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c | 20 +++++++++++++++++---
 2 files changed, 30 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-csi.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-csi.c
index e6642a2167ef..b6e47e2f1b94 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-csi.c
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-csi.c
@@ -125,8 +125,20 @@ static void rkisp1_csi_disable(struct rkisp1_csi *csi)
 	struct rkisp1_device *rkisp1 = csi->rkisp1;
 	u32 val;
 
-	/* Mask and clear interrupts. */
+	/* Mask MIPI interrupts. */
 	rkisp1_write(rkisp1, RKISP1_CIF_MIPI_IMSC, 0);
+
+	/* Flush posted writes */
+	rkisp1_read(rkisp1, RKISP1_CIF_MIPI_IMSC);
+
+	/*
+	 * Wait until the IRQ handler has ended. The IRQ handler may get called
+	 * even after this, but it will return immediately as the MIPI
+	 * interrupts have been masked.
+	 */
+	synchronize_irq(rkisp1->irqs[RKISP1_IRQ_MIPI]);
+
+	/* Clear MIPI interrupt status */
 	rkisp1_write(rkisp1, RKISP1_CIF_MIPI_ICR, ~0);
 
 	val = rkisp1_read(rkisp1, RKISP1_CIF_MIPI_CTRL);
diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
index ca6703bfd27b..29b538a5e1bb 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
@@ -254,11 +254,25 @@ static void rkisp1_isp_stop(struct rkisp1_isp *isp)
 	 * ISP(mi) stop in mi frame end -> Stop ISP(mipi) ->
 	 * Stop ISP(isp) ->wait for ISP isp off
 	 */
-	/* stop and clear MI and ISP interrupts */
-	rkisp1_write(rkisp1, RKISP1_CIF_ISP_IMSC, 0);
-	rkisp1_write(rkisp1, RKISP1_CIF_ISP_ICR, ~0);
 
+	/* Mask MI and ISP interrupts */
+	rkisp1_write(rkisp1, RKISP1_CIF_ISP_IMSC, 0);
 	rkisp1_write(rkisp1, RKISP1_CIF_MI_IMSC, 0);
+
+	/* Flush posted writes */
+	rkisp1_read(rkisp1, RKISP1_CIF_MI_IMSC);
+
+	/*
+	 * Wait until the IRQ handler has ended. The IRQ handler may get called
+	 * even after this, but it will return immediately as the MI and ISP
+	 * interrupts have been masked.
+	 */
+	synchronize_irq(rkisp1->irqs[RKISP1_IRQ_ISP]);
+	if (rkisp1->irqs[RKISP1_IRQ_ISP] != rkisp1->irqs[RKISP1_IRQ_MI])
+		synchronize_irq(rkisp1->irqs[RKISP1_IRQ_MI]);
+
+	/* Clear MI and ISP interrupt status */
+	rkisp1_write(rkisp1, RKISP1_CIF_ISP_ICR, ~0);
 	rkisp1_write(rkisp1, RKISP1_CIF_MI_ICR, ~0);
 
 	/* stop ISP */

-- 
2.34.1