| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAGXv+5FhTwovv7qztGfC+FG8pb-kzZomRPgKboFYJmBTZ=mj6g@mail.gmail.com>
Date: Thu, 7 Dec 2023 20:28:05 +0900
From: Chen-Yu Tsai <wenst@...omium.org>
To: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>
Cc: Matthias Brugger <matthias.bgg@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
Conor Dooley <conor.dooley@...rochip.com>
Subject: Re: [PATCH v3 6/9] arm64: dts: mediatek: Add MT8186 Krabby platform
based Tentacruel / Tentacool
On Thu, Dec 7, 2023 at 8:23 PM Chen-Yu Tsai <wenst@...omium.org> wrote:
>
> On Thu, Dec 7, 2023 at 2:28 PM Chen-Yu Tsai <wenst@...omium.org> wrote:
> >
> > On Mon, Dec 4, 2023 at 11:27 PM AngeloGioacchino Del Regno
> > <angelogioacchino.delregno@...labora.com> wrote:
> > >
> > > Il 04/12/23 09:40, Chen-Yu Tsai ha scritto:
> > > > Tentacruel and Tentacool are MT8186 based Chromebooks based on the
> > > > Krabby design.
> > > >
> > > > Tentacruel, also known as the ASUS Chromebook CM14 Flip CM1402F, is a
> > > > convertible device with touchscreen and stylus.
> > > >
> > > > Tentacool, also known as the ASUS Chromebook CM14 CM1402C, is a laptop
> > > > device. It does not have a touchscreen or stylus.
> > > >
> > > > The two devices both have two variants. The difference is a second
> > > > source touchpad controller that shares the same address as the original,
> > > > but is incompatible.
> > > >
> > > > The extra SKU IDs for the Tentacruel devices map to different sensor
> > > > components attached to the Embedded Controller. These are not visible
> > > > to the main processor.
> > > >
> > > > Signed-off-by: Chen-Yu Tsai <wenst@...omium.org>
> > > > Acked-by: Conor Dooley <conor.dooley@...rochip.com>
> > > > ---
> > > > Changes since v2:
> > > > - Picked up Conor's ack
> > > > - Rename touchpad to trackpad
> > > > - Drop pinctrl properties from trackpad in tentacruel/tentacool second
> > > > source trackpad
> > > >
> > > > Changes since v1:
> > > > - Reorder SKU numbers in descending order.
> > > > - Fixed pinconfig node names
> > > > - Moved pinctrl-* properties after interrupts-*
> > > > - Switched to interrupts-extended for external components
> > > > - Marked ADSP as explicitly disabled, with a comment explaining that it
> > > > stalls the system
> > > > - Renamed "touchpad" to "trackpad"
> > > > - Dropped bogus "no-laneswap" property from it6505 node
> > > > - Moved "realtek,jd-src" property to after all the regulator supplies
> > > > - Switched to macros for MT6366 regulator "regulator-allowed-modes"
> > > > - Renamed "vgpu" regulator name to allow coupling, with a comment
> > > > containing the name used in the design
> > > > - Renamed "cr50" node name to "tpm"
> > > > - Moved trackpad_pins reference up to i2c2; workaround for second source
> > > > component resource sharing.
> > > > - Fix copyright year
> > > > - Fixed touchscreen supply name
> > > >
> > > > arch/arm64/boot/dts/mediatek/Makefile | 4 +
> > > > .../dts/mediatek/mt8186-corsola-krabby.dtsi | 129 ++
> > > > .../mt8186-corsola-tentacool-sku327681.dts | 57 +
> > > > .../mt8186-corsola-tentacool-sku327683.dts | 24 +
> > > > .../mt8186-corsola-tentacruel-sku262144.dts | 44 +
> > > > .../mt8186-corsola-tentacruel-sku262148.dts | 26 +
> > > > .../boot/dts/mediatek/mt8186-corsola.dtsi | 1719 +++++++++++++++++
> > > > 7 files changed, 2003 insertions(+)
> > > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
> > > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
> > > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
> > > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
> > > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
> > > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
> > > >
> > > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> > > > index e6e7592a3645..442af61b1305 100644
> > > > --- a/arch/arm64/boot/dts/mediatek/Makefile
> > > > +++ b/arch/arm64/boot/dts/mediatek/Makefile
> > > > @@ -43,6 +43,10 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb
> > > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
> > > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
> > > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
> > > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb
> > > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb
> > > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb
> > > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262148.dtb
> > > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
> > > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
> > > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb
> > > > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
> > > > new file mode 100644
> > > > index 000000000000..9b2b64525961
> > > > --- /dev/null
> > > > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
> > > > @@ -0,0 +1,129 @@
> > > > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > > > +/*
> > > > + * Copyright 2022 Google LLC
> > > > + */
> > > > +
> > > > +/dts-v1/;
> > > > +#include "mt8186-corsola.dtsi"
> > > > +#include <dt-bindings/gpio/gpio.h>
> > > > +
> > > > +/ {
> > > > + aliases {
> > > > + i2c4 = &i2c4;
> > > > + };
> > > > +};
> > > > +
> > > > +&dsi_out {
> > > > + remote-endpoint = <&ps8640_in>;
> > > > +};
> > > > +
> > > > +&i2c0 {
> > > > + clock-frequency = <400000>;
> > > > +
> > > > + ps8640: edp-bridge@8 {
> > > > + compatible = "parade,ps8640";
> > > > + reg = <0x8>;
> > > > + powerdown-gpios = <&pio 96 GPIO_ACTIVE_LOW>;
> > > > + reset-gpios = <&pio 98 GPIO_ACTIVE_LOW>;
> > > > + pinctrl-names = "default";
> > > > + pinctrl-0 = <&ps8640_pins>;
> > > > + vdd12-supply = <&mt6366_vrf12_reg>;
> > > > + vdd33-supply = <&mt6366_vcn33_reg>;
> > > > +
> > > > + ports {
> > > > + #address-cells = <1>;
> > > > + #size-cells = <0>;
> > > > +
> > > > + port@0 {
> > > > + reg = <0>;
> > > > +
> > > > + ps8640_in: endpoint {
> > > > + remote-endpoint = <&dsi_out>;
> > > > + };
> > > > + };
> > > > +
> > > > + port@1 {
> > > > + reg = <1>;
> > > > +
> > > > + ps8640_out: endpoint {
> > > > + remote-endpoint = <&panel_in>;
> > > > + };
> > > > + };
> > > > + };
> > > > +
> > > > + aux-bus {
> > > > + panel {
> > > > + compatible = "edp-panel";
> > > > + power-supply = <&pp3300_disp_x>;
> > > > + backlight = <&backlight_lcd0>;
> > > > +
> > > > + port {
> > > > + panel_in: endpoint {
> > > > + remote-endpoint = <&ps8640_out>;
> > > > + };
> > > > + };
> > > > + };
> > > > + };
> > > > + };
> > > > +};
> > > > +
> > > > +&i2c1 {
> > > > + i2c-scl-internal-delay-ns = <10000>;
> > > > +
> > > > + touchscreen: touchscreen@10 {
> > > > + compatible = "hid-over-i2c";
> > > > + reg = <0x10>;
> > > > + interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
> > > > + pinctrl-names = "default";
> > > > + pinctrl-0 = <&touchscreen_pins>;
> > > > + post-power-on-delay-ms = <10>;
> > > > + hid-descr-addr = <0x0001>;
> > > > + vdd-supply = <&pp3300_s3>;
> > > > + };
> > > > +};
> > > > +
> > > > +&i2c4 {
> > > > + pinctrl-names = "default";
> > > > + pinctrl-0 = <&i2c4_pins>;
> > > > + clock-frequency = <400000>;
> > > > + status = "okay";
> > > > +
> > > > + proximity@28 {
> > > > + compatible = "semtech,sx9324";
> > > > + reg = <0x28>;
> > > > + interrupts-extended = <&pio 5 IRQ_TYPE_LEVEL_LOW>;
> > > > + pinctrl-names = "default";
> > > > + pinctrl-0 = <&sar_sensor_pins>;
> > > > + vdd-supply = <&mt6366_vio18_reg>;
> > > > + svdd-supply = <&mt6366_vio18_reg>;
> > > > + #io-channel-cells = <1>;
> > >
> > > From the newest DTS coding style document:
> > >
> > > The following order of properties in device nodes is preferred:
> > >
> > > 1. compatible
> > > 2. reg
> > > 3. ranges
> > > 4. Standard/common properties (defined by common bindings, e.g. without
> > > vendor-prefixes)
> > > 5. Vendor-specific properties
> > > 6. status (if applicable)
> > > 7. Child nodes, where each node is preceded with a blank line
> > >
> > > The "status" property is by default "okay", thus it can be omitted.
> > >
> > > The above-described ordering follows this approach:
> > >
> > > 1. Most important properties start the node: compatible then bus addressing to
> > > match unit address.
> > > 2. Each node will have common properties in similar place.
> > > 3. Status is the last information to annotate that device node is or is not
> > > finished (board resources are needed).
> >
> > Wishing for a checking tool now. :p
> >
> > > #io-channel-cells goes after `reg` (same for the other instances) :-)
> >
> > Ack (though it looks weird).
> >
> > > > + };
> > > > +};
> > > > +
> > > > +&pio {
> > > > + i2c4_pins: i2c4-pins {
> > > > + pins-bus {
> > > > + pinmux = <PINMUX_GPIO136__FUNC_SDA4>,
> > > > + <PINMUX_GPIO135__FUNC_SCL4>;
> > > > + bias-disable;
> > > > + drive-strength = <4>;
> > > > + input-enable;
> > > > + };
> > > > + };
> > > > +
> > > > + ps8640_pins: ps8640-pins {
> > > > + pins-pwrdn-rst {
> > > > + pinmux = <PINMUX_GPIO96__FUNC_GPIO96>,
> > > > + <PINMUX_GPIO98__FUNC_GPIO98>;
> > > > + output-low;
> > > > + };
> > > > + };
> > > > +
> > > > + sar_sensor_pins: sar-sensor-pins {
> > > > + pins-irq {
> > > > + pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
> > > > + input-enable;
> > > > + bias-pull-up;
> > > > + };
> > > > + };
> > > > +};
> > > > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
> > > > new file mode 100644
> > > > index 000000000000..9bb64353ca65
> > > > --- /dev/null
> > > > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
> > > > @@ -0,0 +1,57 @@
> > > > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > > > +/*
> > > > + * Copyright 2022 Google LLC
> > > > + */
> > > > +
> > > > +/dts-v1/;
> > > > +#include "mt8186-corsola-krabby.dtsi"
> > > > +
> > > > +/ {
> > > > + model = "Google Tentacool board";
> > > > + compatible = "google,tentacruel-sku327681", "google,tentacruel", "mediatek,mt8186";
> > > > + chassis-type = "laptop";
> > > > +};
> > > > +
> > > > +/* Tentacool omits the pen. */
> > > > +&gpio_keys {
> > > > + status = "disabled";
> > > > +};
> > > > +
> > > > +/* Tentacool omits the touchscreen; nothing else is on i2c1. */
> > > > +&i2c1 {
> > > > + status = "disabled";
> > > > +};
> > > > +
> > > > +&keyboard_controller {
> > > > + function-row-physmap = <
> > > > + MATRIX_KEY(0x00, 0x02, 0) /* T1 */
> > > > + MATRIX_KEY(0x03, 0x02, 0) /* T2 */
> > > > + MATRIX_KEY(0x02, 0x02, 0) /* T3 */
> > > > + MATRIX_KEY(0x01, 0x02, 0) /* T4 */
> > > > + MATRIX_KEY(0x03, 0x04, 0) /* T5 */
> > > > + MATRIX_KEY(0x02, 0x04, 0) /* T6 */
> > > > + MATRIX_KEY(0x01, 0x04, 0) /* T7 */
> > > > + MATRIX_KEY(0x02, 0x09, 0) /* T8 */
> > > > + MATRIX_KEY(0x01, 0x09, 0) /* T9 */
> > > > + MATRIX_KEY(0x00, 0x04, 0) /* T10 */
> > > > + >;
> > > > +
> > > > + linux,keymap = <
> > > > + MATRIX_KEY(0x00, 0x02, KEY_BACK)
> > > > + MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
> > > > + MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
> > > > + MATRIX_KEY(0x01, 0x02, KEY_SCALE)
> > > > + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
> > > > + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
> > > > + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
> > > > + MATRIX_KEY(0x02, 0x09, KEY_MUTE)
> > > > + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
> > > > + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
> > > > + CROS_STD_MAIN_KEYMAP
> > > > + >;
> > > > +};
> > > > +
> > > > +/* Tentacool omits the touchscreen. */
> > > > +&touchscreen {
> > > > + status = "disabled";
> > > > +};
> > > > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
> > > > new file mode 100644
> > > > index 000000000000..c3ae6f9616c8
> > > > --- /dev/null
> > > > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
> > > > @@ -0,0 +1,24 @@
> > > > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > > > +/*
> > > > + * Copyright 2023 Google LLC
> > > > + */
> > > > +
> > > > +#include "mt8186-corsola-tentacool-sku327681.dts"
> > > > +
> > > > +/ {
> > > > + compatible = "google,tentacruel-sku327683", "google,tentacruel", "mediatek,mt8186";
> > > > +};
> > > > +
> > > > +/* This variant replaces only the trackpad controller. */
> > > > +&i2c2 {
> > > > + /delete-node/ trackpad@15;
> > >
> > > Why are you deleting the trackpad@15 node?
> > >
> > > You can simply override the compatible, or actually omit the compatible string
> > > in the *.dtsi file, and set just that in each board *.dts.
> > >
> > > dtsi:
> > > trackpad_a: trackpad@15 {
> > > /* Compatible is set in each board dts */
> > > reg, interrupts, others
> > > }
> > >
> > > dts:
> > >
> > > &trackpad_a {
> > > compatible = "elan,ekth3000";
> > > };
> >
> > The original trackpad@15 comes from the base design and is used for all
> > models other than the ones with the conflicting component. Hence I believe
> > it should live in the base .dtsi.
> >
> > The delete-node makes it much less likely to have any lingering properties.
> > These are not nodes that just differ in compatible strings like DSI panels.
> > They have incompatible bindings. For example, elan,ekth3000 uses "vcc-supply",
> > while "hid-over-i2c" uses "vdd-supply".
> >
> > And going back to my previous argument, the base design used one specific
> > model which is carried over to all the other models.
> >
> > Suppose I add a phandle to the original trackpad, and do
> >
> > /delete-node/ &trackpad;
> >
> > Would that be better?
> >
> > > other dts:
> > >
> > > &trackpad_a {
> > > compatible = "hid-over-i2c";
> > > };
> > >
> > > > +
> > > > + trackpad@15 {
> > > > + compatible = "hid-over-i2c";
> > > > + reg = <0x15>;
> > > > + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
> > > > + hid-descr-addr = <0x0001>;
> > > > + vdd-supply = <&pp3300_s3>;
> > > > + wakeup-source;
> > > > + };
> > > > +};
> > > > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
> > > > new file mode 100644
> > > > index 000000000000..26d3451a5e47
> > > > --- /dev/null
> > > > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
> > > > @@ -0,0 +1,44 @@
> > > > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > > > +/*
> > > > + * Copyright 2022 Google LLC
> > > > + */
> > > > +
> > > > +/dts-v1/;
> > > > +#include "mt8186-corsola-krabby.dtsi"
> > > > +
> > > > +/ {
> > > > + model = "Google Tentacruel board";
> > > > + compatible = "google,tentacruel-sku262147", "google,tentacruel-sku262146",
> > > > + "google,tentacruel-sku262145", "google,tentacruel-sku262144",
> > > > + "google,tentacruel", "mediatek,mt8186";
> > > > + chassis-type = "convertible";
> > > > +};
> > > > +
> > > > +&keyboard_controller {
> > > > + function-row-physmap = <
> > > > + MATRIX_KEY(0x00, 0x02, 0) /* T1 */
> > > > + MATRIX_KEY(0x03, 0x02, 0) /* T2 */
> > > > + MATRIX_KEY(0x02, 0x02, 0) /* T3 */
> > > > + MATRIX_KEY(0x01, 0x02, 0) /* T4 */
> > > > + MATRIX_KEY(0x03, 0x04, 0) /* T5 */
> > > > + MATRIX_KEY(0x02, 0x04, 0) /* T6 */
> > > > + MATRIX_KEY(0x01, 0x04, 0) /* T7 */
> > > > + MATRIX_KEY(0x02, 0x09, 0) /* T8 */
> > > > + MATRIX_KEY(0x01, 0x09, 0) /* T9 */
> > > > + MATRIX_KEY(0x00, 0x04, 0) /* T10 */
> > > > + >;
> > > > +
> > > > + linux,keymap = <
> > > > + MATRIX_KEY(0x00, 0x02, KEY_BACK)
> > > > + MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
> > > > + MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
> > > > + MATRIX_KEY(0x01, 0x02, KEY_SCALE)
> > > > + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
> > > > + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
> > > > + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
> > > > + MATRIX_KEY(0x02, 0x09, KEY_MUTE)
> > > > + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
> > > > + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
> > > > + CROS_STD_MAIN_KEYMAP
> > > > + >;
> > > > +};
> > > > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
> > > > new file mode 100644
> > > > index 000000000000..447b57b12b41
> > > > --- /dev/null
> > > > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
> > > > @@ -0,0 +1,26 @@
> > > > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > > > +/*
> > > > + * Copyright 2023 Google LLC
> > > > + */
> > > > +
> > > > +#include "mt8186-corsola-tentacruel-sku262144.dts"
> > > > +
> > > > +/ {
> > > > + compatible = "google,tentacruel-sku262151", "google,tentacruel-sku262150",
> > > > + "google,tentacruel-sku262149", "google,tentacruel-sku262148",
> > > > + "google,tentacruel", "mediatek,mt8186";
> > > > +};
> > > > +
> > > > +/* This variant replaces only the trackpad controller. */
> > > > +&i2c2 {
> > > > + /delete-node/ trackpad@15;
> > > > +
> > > > + trackpad@15 {
> > > > + compatible = "hid-over-i2c";
> > > > + reg = <0x15>;
> > > > + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
> > > > + hid-descr-addr = <0x0001>;
> > > > + vdd-supply = <&pp3300_s3>;
> > > > + wakeup-source;
> > > > + };
> > > > +};
> > > > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
> > > > new file mode 100644
> > > > index 000000000000..8726b2916ef1
> > > > --- /dev/null
> > > > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
> > > > @@ -0,0 +1,1719 @@
> > > > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > > > +/*
> > > > + * Copyright (C) 2022 MediaTek Inc.
> > > > + */
> > > > +/dts-v1/;
> > > > +#include "mt8186.dtsi"
> > > > +#include <dt-bindings/pinctrl/mt8186-pinfunc.h>
> > > > +#include <dt-bindings/gpio/gpio.h>
> > > > +#include <dt-bindings/input/input.h>
> > > > +#include <dt-bindings/input/gpio-keys.h>
> > > > +#include <dt-bindings/regulator/mediatek,mt6397-regulator.h>
> > > > +
> > > > +/ {
> > > > + aliases {
> > > > + i2c0 = &i2c0;
> > > > + i2c1 = &i2c1;
> > > > + i2c2 = &i2c2;
> > > > + i2c3 = &i2c3;
> > > > + i2c5 = &i2c5;
> > > > + mmc0 = &mmc0;
> > > > + mmc1 = &mmc1;
> > > > + serial0 = &uart0;
> > > > + };
> > > > +
> > > > + chosen {
> > > > + stdout-path = "serial0:115200n8";
> > > > + };
> > > > +
> > > > + memory@...00000 {
> > > > + device_type = "memory";
> > > > + /* The size should be filled in by the bootloader. */
> > > > + reg = <0 0x40000000 0 0>;
> > > > + };
> > > > +
> > > > + backlight_lcd0: backlight-lcd0 {
> > > > + compatible = "pwm-backlight";
> > > > + pwms = <&pwm0 0 500000>;
> > > > + power-supply = <&ppvar_sys>;
> > > > + enable-gpios = <&pio 152 0>;
> > > > + brightness-levels = <0 1023>;
> > > > + num-interpolated-steps = <1023>;
> > > > + default-brightness-level = <576>;
> > > > + };
> > > > +
> > > > + btsco: bt-sco {
> > >
> > > Do you really need the phandle to bt-sco?
> >
> > No. But the sound node probably should be referencing it and the dmic
> > node via DT instead of hardcoding the DAI and codec names in the machine
> > driver.
> >
> > Anyway, will remove the label for now.
> >
> > > Also, this node describes a codec, so: "bt-sco-codec" please!
> >
> > Ack.
> >
> > > > + compatible = "linux,bt-sco";
> > > > + #sound-dai-cells = <0>;
> > > > + };
> > > > +
> > > > + dmic_codec: dmic-codec {
> > >
> > > This phandle is unused...
> >
> > Removed.
> >
> > > ..snip..
> > >
> > > > +
> > > > +&adsp {
> > > > + memory-region = <&adsp_dma_mem>, <&adsp_mem>;
> > > > + status = "disabled"; /* causes stall */
> > >
> > > This is a firmware issue: once the correct firmware is uploaded to linux-firmware
> > > the dsp node can get enabled... so it we make sure that this happens before this
> > > devicetree gets picked, we can avoid a second commit enabling audio.
> > >
> > > After all, since we *want to* use the Xtensa DSP for audio, without it booted
> > > sound won't work *anyway*.... so having the firmware in place can also be seen
> > > as a direct dependency of the entire audio functionality.
> > >
> > > P.S.: The FW that is distributed with ChromeOS works just fine!
> >
> > I'll give that a try.
>
> I have:
>
> sof-audio-of-mt8186 10680000.adsp: Firmware info: version 2:0:0-5494c
> sof-audio-of-mt8186 10680000.adsp: Firmware: ABI 3:22:1 Kernel ABI 3:23:0
> sof-audio-of-mt8186 10680000.adsp: unknown sof_ext_man header type 3 size 0x30
> sof-audio-of-mt8186 10680000.adsp: Firmware info: version 2:0:0-5494c
>
> and it's still hanging.
Looks like I was still using the bad version due to module options...
After removing the options, I now have:
sof-audio-of-mt8186 10680000.adsp: DT DSP detected
sof-audio-of-mt8186 10680000.adsp: assigned reserved memory node memory@...00000
sof-audio-of-mt8186 10680000.adsp: Firmware info: version 2:0:0-714c6
sof-audio-of-mt8186 10680000.adsp: Firmware: ABI 3:22:1 Kernel ABI 3:23:0
sof-audio-of-mt8186 10680000.adsp: unknown sof_ext_man header type 3 size 0x30
sof-audio-of-mt8186 10680000.adsp: Firmware info: version 2:0:0-714c6
sof-audio-of-mt8186 10680000.adsp: Firmware: ABI 3:22:1 Kernel ABI 3:23:0
But sound is still deferring probe:
# cat /sys/kernel/debug/devices_deferred
sound mt8186_mt6366_rt1019_rt5682s:
mt8186_mt6366_rt1019_rt5682s_dev_probe snd_soc_register_card fail
ChenYu
> And FTR, I think sound is also blocked on the it6505 audio support series.
>
> ChenYu
>
>
>
> > > > +};
> > > > +
> > > > +&afe {
> > > > + i2s0-share = "I2S1";
> > > > + i2s3-share = "I2S2";
> > > > + status = "okay";
> > > > +};
> > > > +
> > >
> > > ..snip..
> > >
> > > > +&i2c2 {
> > > > + pinctrl-names = "default";
> > > > + /*
> > > > + * Trackpad pin put here to work around second source components
> > > > + * sharing the pinmux in steelix designs.
> > > > + */
> > > > + pinctrl-0 = <&i2c2_pins>, <&trackpad_pin>;
> > >
> > > There's no choice for now... even if this is not beautiful to see... but it's still
> > > ok for me because we can revisit this later when the HW Prober mechanism will be
> > > upstreamed.
> >
> > Yup. Working on that.
> >
> > > > + clock-frequency = <400000>;
> > > > + i2c-scl-internal-delay-ns = <10000>;
> > > > + status = "okay";
> > > > +
> > > > + trackpad@15 {
> > > > + compatible = "elan,ekth3000";
> > > > + reg = <0x15>;
> > > > + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
> > > > + vcc-supply = <&pp3300_s3>;
> > > > + wakeup-source;
> > > > + };
> > > > +};
> > > > +
> > >
> > > Thanks,
> > > Angelo
> >
> > Thanks for the review again.
> >
> > ChenYu
Powered by blists - more mailing lists