[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231122-phy-qualcomm-v6-v6-20-v7-new-offsets-v3-3-dfd1c375ef61@linaro.org>
Date: Thu, 07 Dec 2023 14:19:12 +0200
From: Abel Vesa <abel.vesa@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
linux-kernel@...r.kernel.org, Abel Vesa <abel.vesa@...aro.org>
Subject: [PATCH v3 3/7] phy: qcom-qmp: pcs: Add v7 register offsets
The X1E80100 platform bumps the HW version of QMP phy to v7 for USB,
and PCIe. Add the new PCS offsets in a dedicated header file.
Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcs-v7.h | 32 ++++++++++++++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 2 ++
2 files changed, 34 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v7.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v7.h
new file mode 100644
index 000000000000..c7759892ed2e
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v7.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_V7_H_
+#define QCOM_PHY_QMP_PCS_V7_H_
+
+/* Only for QMP V7 PHY - USB/PCIe PCS registers */
+#define QPHY_V7_PCS_SW_RESET 0x000
+#define QPHY_V7_PCS_PCS_STATUS1 0x014
+#define QPHY_V7_PCS_POWER_DOWN_CONTROL 0x040
+#define QPHY_V7_PCS_START_CONTROL 0x044
+#define QPHY_V7_PCS_POWER_STATE_CONFIG1 0x090
+#define QPHY_V7_PCS_LOCK_DETECT_CONFIG1 0x0c4
+#define QPHY_V7_PCS_LOCK_DETECT_CONFIG2 0x0c8
+#define QPHY_V7_PCS_LOCK_DETECT_CONFIG3 0x0cc
+#define QPHY_V7_PCS_LOCK_DETECT_CONFIG6 0x0d8
+#define QPHY_V7_PCS_REFGEN_REQ_CONFIG1 0x0dc
+#define QPHY_V7_PCS_RX_SIGDET_LVL 0x188
+#define QPHY_V7_PCS_RCVR_DTCT_DLY_P1U2_L 0x190
+#define QPHY_V7_PCS_RCVR_DTCT_DLY_P1U2_H 0x194
+#define QPHY_V7_PCS_RATE_SLEW_CNTRL1 0x198
+#define QPHY_V7_PCS_CDR_RESET_TIME 0x1b0
+#define QPHY_V7_PCS_ALIGN_DETECT_CONFIG1 0x1c0
+#define QPHY_V7_PCS_ALIGN_DETECT_CONFIG2 0x1c4
+#define QPHY_V7_PCS_PCS_TX_RX_CONFIG 0x1d0
+#define QPHY_V7_PCS_EQ_CONFIG1 0x1dc
+#define QPHY_V7_PCS_EQ_CONFIG2 0x1e0
+#define QPHY_V7_PCS_EQ_CONFIG5 0x1ec
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 71f063f4a56e..21f6a56e7ae3 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -44,6 +44,8 @@
#include "phy-qcom-qmp-pcs-v6_20.h"
+#include "phy-qcom-qmp-pcs-v7.h"
+
/* Only for QMP V3 & V4 PHY - DP COM registers */
#define QPHY_V3_DP_COM_PHY_MODE_CTRL 0x00
#define QPHY_V3_DP_COM_SW_RESET 0x04
--
2.34.1
Powered by blists - more mailing lists