[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231208-resample-selection-3c2c8cecc489@spud>
Date: Fri, 8 Dec 2023 17:12:29 +0000
From: Conor Dooley <conor@...nel.org>
To: linux-riscv@...ts.infradead.org
Cc: conor@...nel.org, Conor Dooley <conor.dooley@...rochip.com>,
Daire McNamara <daire.mcnamara@...rochip.com>,
Wolfgang Grandegger <wg@...ndegger.com>,
Marc Kleine-Budde <mkl@...gutronix.de>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, linux-can@...r.kernel.org,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org
Subject: [PATCH RESEND v1 7/7] riscv: dts: microchip: add missing CAN bus clocks
From: Conor Dooley <conor.dooley@...rochip.com>
The CAN controller on PolarFire SoC has an AHB peripheral clock _and_ a
CAN bus clock. The bus clock was omitted when the binding was written,
but is required for operation. Make up for lost time and add to the DT.
Fixes: 38a71fc04895 ("riscv: dts: microchip: add mpfs's CAN controllers")
Signed-off-by: Conor Dooley <conor.dooley@...rochip.com>
---
arch/riscv/boot/dts/microchip/mpfs.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
index 266489d43912..4d70df0f908c 100644
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -416,7 +416,7 @@ i2c1: i2c@...0b000 {
can0: can@...0c000 {
compatible = "microchip,mpfs-can";
reg = <0x0 0x2010c000 0x0 0x1000>;
- clocks = <&clkcfg CLK_CAN0>;
+ clocks = <&clkcfg CLK_CAN0>, <&clkcfg CLK_MSSPLL3>;
interrupt-parent = <&plic>;
interrupts = <56>;
status = "disabled";
@@ -425,7 +425,7 @@ can0: can@...0c000 {
can1: can@...0d000 {
compatible = "microchip,mpfs-can";
reg = <0x0 0x2010d000 0x0 0x1000>;
- clocks = <&clkcfg CLK_CAN1>;
+ clocks = <&clkcfg CLK_CAN1>, <&clkcfg CLK_MSSPLL3>;
interrupt-parent = <&plic>;
interrupts = <57>;
status = "disabled";
--
2.39.2
Powered by blists - more mailing lists