| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <55564921-5e52-d254-1909-d2ebdc6cea1b@quicinc.com>
Date: Fri, 8 Dec 2023 09:27:59 -0800
From: Abhinav Kumar <quic_abhinavk@...cinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
CC: <freedreno@...ts.freedesktop.org>, Rob Clark <robdclark@...il.com>,
"Sean Paul" <sean@...rly.run>,
Marijn Suijten <marijn.suijten@...ainline.org>,
"David Airlie" <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
<dri-devel@...ts.freedesktop.org>, <quic_jesszhan@...cinc.com>,
<quic_parellan@...cinc.com>, <linux-arm-msm@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 12/16] drm/msm/dpu: add an API to setup the CDM block
for writeback
On 12/8/2023 3:52 AM, Dmitry Baryshkov wrote:
> On Fri, 8 Dec 2023 at 07:07, Abhinav Kumar <quic_abhinavk@...cinc.com> wrote:
>>
>> Add an API dpu_encoder_helper_phys_setup_cdm() which can be used by
>> the writeback encoder to setup the CDM block.
>>
>> Currently, this is defined and used within the writeback's physical
>> encoder layer however, the function can be modified to be used to setup
>> the CDM block even for non-writeback interfaces.
>>
>> Until those modifications are planned and made, keep it local to
>> writeback.
>>
>> changes in v2:
>> - add the RGB2YUV CSC matrix to dpu util as needed by CDM
>> - use dpu_hw_get_csc_cfg() to get and program CSC
>> - drop usage of setup_csc_data() and setup_cdwn() cdm ops
>> as they both have been merged into enable()
>> - drop reduntant hw_cdm and hw_pp checks
>>
>> Signed-off-by: Abhinav Kumar <quic_abhinavk@...cinc.com>
>> ---
>> .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 3 +
>> .../drm/msm/disp/dpu1/dpu_encoder_phys_wb.c | 96 ++++++++++++++++++-
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c | 17 ++++
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h | 1 +
>> 4 files changed, 116 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
>> index 410f6225789c..1d6d1eb642b9 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
>> @@ -16,6 +16,7 @@
>> #include "dpu_hw_pingpong.h"
>> #include "dpu_hw_ctl.h"
>> #include "dpu_hw_top.h"
>> +#include "dpu_hw_cdm.h"
>> #include "dpu_encoder.h"
>> #include "dpu_crtc.h"
>>
>> @@ -210,6 +211,7 @@ static inline int dpu_encoder_phys_inc_pending(struct dpu_encoder_phys *phys)
>> * @wbirq_refcount: Reference count of writeback interrupt
>> * @wb_done_timeout_cnt: number of wb done irq timeout errors
>> * @wb_cfg: writeback block config to store fb related details
>> + * @cdm_cfg: cdm block config needed to store writeback block's CDM configuration
>> * @wb_conn: backpointer to writeback connector
>> * @wb_job: backpointer to current writeback job
>> * @dest: dpu buffer layout for current writeback output buffer
>> @@ -219,6 +221,7 @@ struct dpu_encoder_phys_wb {
>> atomic_t wbirq_refcount;
>> int wb_done_timeout_cnt;
>> struct dpu_hw_wb_cfg wb_cfg;
>> + struct dpu_hw_cdm_cfg cdm_cfg;
>> struct drm_writeback_connector *wb_conn;
>> struct drm_writeback_job *wb_job;
>> struct dpu_hw_fmt_layout dest;
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
>> index 4665367cf14f..85429c62d727 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
>> @@ -259,6 +259,99 @@ static void dpu_encoder_phys_wb_setup_ctl(struct dpu_encoder_phys *phys_enc)
>> }
>> }
>>
>> +/**
>> + * dpu_encoder_phys_wb_setup_cdp - setup chroma down sampling block
>> + * @phys_enc:Pointer to physical encoder
>> + */
>> +static void dpu_encoder_helper_phys_setup_cdm(struct dpu_encoder_phys *phys_enc)
>> +{
>> + struct dpu_hw_cdm *hw_cdm;
>> + struct dpu_hw_cdm_cfg *cdm_cfg;
>> + struct dpu_hw_pingpong *hw_pp;
>> + struct dpu_encoder_phys_wb *wb_enc;
>> + const struct msm_format *format;
>> + const struct dpu_format *dpu_fmt;
>> + struct drm_writeback_job *wb_job;
>> + int ret;
>> +
>> + if (!phys_enc)
>> + return;
>> +
>> + wb_enc = to_dpu_encoder_phys_wb(phys_enc);
>> + cdm_cfg = &wb_enc->cdm_cfg;
>> + hw_pp = phys_enc->hw_pp;
>> + hw_cdm = phys_enc->hw_cdm;
>> + wb_job = wb_enc->wb_job;
>> +
>> + format = msm_framebuffer_format(wb_enc->wb_job->fb);
>> + dpu_fmt = dpu_get_dpu_format_ext(format->pixel_format, wb_job->fb->modifier);
>> +
>> + if (!hw_cdm)
>> + return;
>> +
>> + if (!DPU_FORMAT_IS_YUV(dpu_fmt)) {
>> + DPU_DEBUG("[enc:%d] cdm_disable fmt:%x\n", DRMID(phys_enc->parent),
>> + dpu_fmt->base.pixel_format);
>> + if (hw_cdm->ops.disable)
>> + hw_cdm->ops.disable(hw_cdm);
>> +
>> + return;
>> + }
>> +
>> + memset(cdm_cfg, 0, sizeof(struct dpu_hw_cdm_cfg));
>> +
>> + cdm_cfg->output_width = wb_job->fb->width;
>> + cdm_cfg->output_height = wb_job->fb->height;
>> + cdm_cfg->output_fmt = dpu_fmt;
>> + cdm_cfg->output_type = CDM_CDWN_OUTPUT_WB;
>> + cdm_cfg->output_bit_depth = DPU_FORMAT_IS_DX(dpu_fmt) ?
>> + CDM_CDWN_OUTPUT_10BIT : CDM_CDWN_OUTPUT_8BIT;
>> + cdm_cfg->csc_cfg = dpu_hw_get_csc_cfg(DPU_HW_RGB2YUV_601L_10BIT);
>> + if (!cdm_cfg->csc_cfg) {
>> + DPU_ERROR("valid csc not found\n");
>> + return;
>> + }
>> +
>> + /* enable 10 bit logic */
>> + switch (cdm_cfg->output_fmt->chroma_sample) {
>> + case DPU_CHROMA_RGB:
>> + cdm_cfg->h_cdwn_type = CDM_CDWN_DISABLE;
>> + cdm_cfg->v_cdwn_type = CDM_CDWN_DISABLE;
>> + break;
>> + case DPU_CHROMA_H2V1:
>> + cdm_cfg->h_cdwn_type = CDM_CDWN_COSITE;
>> + cdm_cfg->v_cdwn_type = CDM_CDWN_DISABLE;
>> + break;
>> + case DPU_CHROMA_420:
>> + cdm_cfg->h_cdwn_type = CDM_CDWN_COSITE;
>> + cdm_cfg->v_cdwn_type = CDM_CDWN_OFFSITE;
>> + break;
>> + case DPU_CHROMA_H1V2:
>> + default:
>> + DPU_ERROR("[enc:%d] unsupported chroma sampling type\n",
>> + DRMID(phys_enc->parent));
>> + cdm_cfg->h_cdwn_type = CDM_CDWN_DISABLE;
>> + cdm_cfg->v_cdwn_type = CDM_CDWN_DISABLE;
>
> If it is unsupported, we should return an error here.
>
The caller of this API and the caller of the API even before that do not
have error checking as they are all void. Disabling CDWN is the
appropriate corrective action for this case and should be sufficient.
>> + break;
>> + }
>> +
>> + DPU_DEBUG("[enc:%d] cdm_enable:%d,%d,%X,%d,%d,%d,%d]\n",
>> + DRMID(phys_enc->parent), cdm_cfg->output_width,
>> + cdm_cfg->output_height, cdm_cfg->output_fmt->base.pixel_format,
>> + cdm_cfg->output_type, cdm_cfg->output_bit_depth,
>> + cdm_cfg->h_cdwn_type, cdm_cfg->v_cdwn_type);
>> +
>> + if (hw_cdm->ops.enable) {
>> + cdm_cfg->pp_id = hw_pp->idx;
>> + ret = hw_cdm->ops.enable(hw_cdm, cdm_cfg);
>> + if (ret < 0) {
>> + DPU_ERROR("[enc:%d] failed to enable CDM; ret:%d\n",
>> + DRMID(phys_enc->parent), ret);
>> + return;
>> + }
>> + }
>> +}
>> +
>> /**
>> * dpu_encoder_phys_wb_atomic_check - verify and fixup given atomic states
>> * @phys_enc: Pointer to physical encoder
>> @@ -382,8 +475,9 @@ static void dpu_encoder_phys_wb_setup(
>>
>> dpu_encoder_phys_wb_setup_fb(phys_enc, fb);
>>
>> - dpu_encoder_phys_wb_setup_ctl(phys_enc);
>> + dpu_encoder_helper_phys_setup_cdm(phys_enc);
>>
>> + dpu_encoder_phys_wb_setup_ctl(phys_enc);
>> }
>>
>> /**
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c
>> index 59a153331194..34143491aba2 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c
>> @@ -87,6 +87,8 @@ static u32 dpu_hw_util_log_mask = DPU_DBG_MASK_NONE;
>> #define QOS_QOS_CTRL_VBLANK_EN BIT(16)
>> #define QOS_QOS_CTRL_CREQ_VBLANK_MASK GENMASK(21, 20)
>>
>> +#define TO_S15D16(_x_)((_x_) << 7)
>
> Huh? I don't understand why it is shifted by 7. If you have data in
> S8.9 format, I'd say that it makes things less obvious compared to
> S15.16 (where you can perform division on the fly).
>
I was referring to below comment and also because the values are in
S15.16 in
https://git.codelinaro.org/clo/la/platform/vendor/opensource/display-drivers/-/blob/clo/main/msm/sde/sde_encoder_phys_wb.c?ref_type=heads#L35
428 struct dpu_csc_cfg {
429 /* matrix coefficients in S15.16 format */
430 uint32_t csc_mv[DPU_CSC_MATRIX_COEFF_SIZE];
431 uint32_t csc_pre_bv[DPU_CSC_BIAS_SIZE];
432 uint32_t csc_post_bv[DPU_CSC_BIAS_SIZE];
433 uint32_t csc_pre_lv[DPU_CSC_CLAMP_SIZE];
434 uint32_t csc_post_lv[DPU_CSC_CLAMP_SIZE];
435 };
436
>> +
>> static const struct dpu_csc_cfg dpu_csc_YUV2RGB_601L = {
>> {
>> /* S15.16 format */
>> @@ -117,6 +119,18 @@ static const struct dpu_csc_cfg dpu_csc10_YUV2RGB_601L = {
>> { 0x00, 0x3ff, 0x00, 0x3ff, 0x00, 0x3ff,},
>> };
>>
>> +static const struct dpu_csc_cfg dpu_csc10_rgb2yuv_601l = {
>> + {
>> + TO_S15D16(0x0083), TO_S15D16(0x0102), TO_S15D16(0x0032),
>> + TO_S15D16(0x1fb5), TO_S15D16(0x1f6c), TO_S15D16(0x00e1),
>> + TO_S15D16(0x00e1), TO_S15D16(0x1f45), TO_S15D16(0x1fdc)
>> + },
>> + { 0x00, 0x00, 0x00 },
>> + { 0x0040, 0x0200, 0x0200 },
>> + { 0x000, 0x3ff, 0x000, 0x3ff, 0x000, 0x3ff },
>> + { 0x040, 0x3ac, 0x040, 0x3c0, 0x040, 0x3c0 },
>> +};
>> +
>> /**
>> * dpu_hw_get_csc_cfg - get the CSC matrix based on the request type
>> * @type: type of the requested CSC matrix from caller
>> @@ -133,6 +147,9 @@ const struct dpu_csc_cfg *dpu_hw_get_csc_cfg(enum dpu_hw_csc_cfg_type type)
>> case DPU_HW_YUV2RGB_601L_10BIT:
>> csc_cfg = &dpu_csc10_YUV2RGB_601L;
>> break;
>> + case DPU_HW_RGB2YUV_601L_10BIT:
>> + csc_cfg = &dpu_csc10_rgb2yuv_601l;
>> + break;
>> default:
>> DPU_ERROR("unknown csc_cfg type\n");
>> break;
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h
>> index 49f2bcf6de15..ed153d66f660 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h
>> @@ -22,6 +22,7 @@
>> enum dpu_hw_csc_cfg_type {
>> DPU_HW_YUV2RGB_601L,
>> DPU_HW_YUV2RGB_601L_10BIT,
>> + DPU_HW_RGB2YUV_601L_10BIT,
>> };
>>
>> /*
>> --
>> 2.40.1
>>
>
>
Powered by blists - more mailing lists