[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2yx7snbvbvjycuszzonmwxokr4pvqslz2bpy4eoyrri5tzlymb@t3t23x7eeknq>
Date: Fri, 8 Dec 2023 14:20:27 -0600
From: Andrew Halaney <ahalaney@...hat.com>
To: Sneh Shah <quic_snehshah@...cinc.com>
Cc: Vinod Koul <vkoul@...nel.org>,
Bhupesh Sharma <bhupesh.sharma@...aro.org>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
netdev@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
kernel@...cinc.com
Subject: Re: [PATCH net v3] net: stmmac: update Rx clk divider for 10M SGMII
On Fri, Dec 08, 2023 at 11:55:02AM +0530, Sneh Shah wrote:
> SGMII 10MBPS mode needs RX clock divider to avoid drops in Rx.
> Update configure SGMII function with rx clk divider programming.
>
> Fixes: 463120c31c58 ("net: stmmac: dwmac-qcom-ethqos: add support for SGMII")
You didn't add my:
Tested-by: Andrew Halaney <ahalaney@...hat.com>
from the last version. Typically that's fine to do even if you post a
new version as long as the changes are minor (in your case it's just the
comment that was added since I tested, so definitely fine to do).
> Signed-off-by: Sneh Shah <quic_snehshah@...cinc.com>
> ---
> v3 changelog:
> - Added comment to explain why MAC needs to be reconfigured for SGMII
> v2 changelog:
> - Use FIELD_PREP to prepare bifield values in place of GENMASK
> - Add fixes tag
> ---
> drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> index d3bf42d0fceb..ab2245995bc6 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> @@ -34,6 +34,7 @@
> #define RGMII_CONFIG_LOOPBACK_EN BIT(2)
> #define RGMII_CONFIG_PROG_SWAP BIT(1)
> #define RGMII_CONFIG_DDR_MODE BIT(0)
> +#define RGMII_CONFIG_SGMII_CLK_DVDR GENMASK(18, 10)
>
> /* SDCC_HC_REG_DLL_CONFIG fields */
> #define SDCC_DLL_CONFIG_DLL_RST BIT(30)
> @@ -598,6 +599,9 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos)
> return 0;
> }
>
> +/* On interface toggle MAC registetrs gets reset.
> + * Configure MAC block for SGMII on ethernet phy link up
> + */
s/registetrs/registers/
> static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
> {
> int val;
> @@ -617,6 +621,9 @@ static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
> case SPEED_10:
> val |= ETHQOS_MAC_CTRL_PORT_SEL;
> val &= ~ETHQOS_MAC_CTRL_SPEED_MODE;
> + rgmii_updatel(ethqos, RGMII_CONFIG_SGMII_CLK_DVDR,
> + FIELD_PREP(RGMII_CONFIG_SGMII_CLK_DVDR, 0x31),
> + RGMII_IO_MACRO_CONFIG);
> break;
> }
>
> --
> 2.17.1
>
Powered by blists - more mailing lists